European Rail Traffic Management System

European Rail Traffic Management System

ERTMS logo
Formation	1998/1999
Website	www.ertms.net

The European Rail Traffic Management System (ERTMS) is an initiative backed by the European Union to greatly enhance safety, increase efficiency of trains and enhance cross-border interoperability of rail transport in Europe by replacing signalling equipment with digitized mostly wireless versions and by creating a single Europe-wide standard for train control and command systems.

The two main components of ERTMS are the European Train Control System (ETCS), a standard for in-cab train control, and GSM-R, the GSM mobile communications standard for railway operations.^[1] The equipment can further be subdivided between on-board and infrastructure equipment.

Companies

Companies developing ERTMS systems include UNIFE/UNISIG members Alstom, Thales, AZD , Ansaldo STS, Siemens Mobility, Bombardier Transportation, CAF and MERMEC. Additionally, there is one emerging Japanese supplier.

Companies that provide testing solutions for ERTMS systems include: Comtest Wireless^[2]

Logo

In October 2010 a logo was adopted for ERTMS, which oversees ETCS, an upright orange rectangle with rounded edges. The lower third shows "ertms" in lower-case sans-serif typeface, the upper two thirds 12 wide beams converging to a point on the right side, with two of the beams coming from the bottom, starting above the "e" and "s".^[3]

Timeline

2004

• December: Zaragoza – Huesca High Speed line in Spain opens with ERTMS Level 1.^[4]

2005

• December: Rome–Naples high-speed railway opens with ERTMS Level 2.

2006

• February: ERTMS-2 is extended to the new Turin–Milan high-speed line (open between Turin and Novara) and the Mattstetten–Rothrist line in Switzerland.
• October: Network Rail announced that ERTMS would be operational on the Cambrian Line in December 2008 and would cost £59million.

2007

• June: The Lötschberg Base Tunnel, part of the Swiss AlpTransit initiative, opens with ERTMS Level 2.^[5]
• June: The Betuweroute, a new cargo line with ERTMS Level 2 between the port of Rotterdam and the German border opens for commercial traffic.
• June: The LGV Est from Vaires-sur-Marne (Seine-et-Marne) near Paris to Baudrecourt (Moselle) opens with ERTMS. It is an extension to the French high-speed TGV network, connecting Paris and Strasbourg.

2008

• On the Cambrian Line Network Rail install ERTMS In-Cab ETCS (European Train Control System) level 2, specification 2.3.0d This level does not require conventional fixed signals – existing signals and RETB boards will be removed. Additionally, the lineside speed signs will be redundant – drivers are given the appropriate maximum speed on the cab display. The main supplier was Ansaldo STS. Interfleet Technology Limited of Derby England were commissioned to carry out the design for the passenger rolling stock and subsequently managed the installation on site at LNWR, Crewe under contract to ASTS. Eldin Rail were contracted by Ansaldo STS as their infrastructure partner managing and installing all aspects of lineside infrastructure including the purpose built Control Centre. During the design phase the key project stakeholders; Network Rail, Arriva Trains Wales and Angel Trains were all consulted to ensure the design was robust due to the criticality of the project, as the first installation of its kind in the UK. Twenty-four Class 158 units were fitted as well as three Class 97/3 locomotives (formerly Class 37 and prior to that as the English Electric Type 3) to be used for piloting services. The Class 97/3 design and installation was provided by Transys Projects Limited of Birmingham England for Ansaldo STS.
• October: Opening of Beijing–Tianjin Intercity Railway equipped with ETCS Level 1
• December: Opening of Milano-Bologna line

2009

• In July 2009, the European Commission announced that ETCS is now mandatory for all EU funded projects which include new or upgraded signalling and GSM-R is required when radio communications are upgraded.^[6]
• September: HSL-Zuid/HSL 4 opened to commercial traffic. It is a new 125-km long high-speed line between the Netherlands and Belgium that uses ERTMS Level 2 with a fallback option to ERTMS Level 1 (although restricted to 160 km/h in the Netherlands).
• Autumn/Winter: opening of HS lines Novara-Milano and Bologna–Florence, thus completing the whole HS line Turin-Naples.^[7]
• April: ERTMS will be used in Auckland, New Zealand^[8]
• December: Opening of Wuhan–Guangzhou High-Speed Railway equipped with CTCS Level-3 (based on ETCS Level-2)
• In Denmark, there was a decision to replace all signalling systems in the country with ERTMS, to be finished 2021. The exception is the S-Train network which will get CBTC, a system for metros.

2010

• Botniabanan in northern Sweden started operation with ERTMS in August.^[9]
• Start of operation of Cambrian Early Deployment Scheme (EDS) comprising 24 ERTMS fitted Class 158 units and 3 Class 97/3 locomotives.^[10]
• Start of the national roll-out of ERTMS in the United Kingdom.^[11]
• The Cambrian ERTMS – Pwllheli to Harlech Rehearsal commenced on 13 February 2010 and successfully finished on 18 February 2010. The driver familiarisation and practical handling stage of the Rehearsal has provided an excellent opportunity to monitor the use of GSM-R voice in operation on this route. The first train departed Pwllheli at 0853hrs in ERTMS Level 2 Operation with GSM-R voice being used as the only means of communication between the driver and the signaller.
• New Zealand begins rolling out ERTMS together with new solid-state interlocking for electrification in Auckland^[12] together with new resignalling in for electrification.
• On West Dalarna Line in mid Sweden a demonstration run was made using ERTMS Regional, Level 3, in November.
• Libya to install ERTMS^[13]
• September – new ERTMS logo adopted.
• October: The Cambrian ERTMS – Pwllheli to Harlech commissioned for passenger carrying service under ERTMS level 2 without lineside signals.

2011

• March 2011: Full commissioning of Cambrian Line (Sutton Bridge Junction-Aberystwyth or Pwllheli) in Wales under ERTMS level 2 without lineside signals.^[14]
• October, ERTMS level 2 adopted in Madrid-Barcelona high speed line. AVE trains up to 350 km/h.

2012

• 21 February: Full commissioning of West Dalarna Line (Repbäcken-Malung) in Dalarna, Sweden, under ERTMS level 3 without lineside signals or track detection devices.^[15][16]
• In April 2012 at the UIC ERTMS World Conference in Stockholm, Sweden, the Executive Director of the Community of European Railway and Infrastructure Companies (CER) called for an accelerated implementation of ERTMS in Europe.^[17]
• In May 2012, the Transport Administration in Sweden decided to delay the introduction of ERTMS into more Swedish railways a few years, because of the trouble on Botniabanan and Ådalsbanan railways, and unclear financing of rebuilding the rolling stock.^[18]

2015

• 30 July: As part of the Thameslink Programme, ERTMS is used for the first time in the Core using new British Rail Class 700 rolling stock. This upgrade is in order to raise capacity in the core to up to 24tph.
• August: The eastern branch of the Østfold Line becomes first line with ERTMS functionality in Norway.

ERTMS implementation strategies

Various railway signalling roll out strategies can be used for deployment of the European Rail Traffic Management System. With the introduction of ERTMS the infrastructure manager has to decide whether a line will be equipped only with ERTMS or whether a mixed signalling system is the better solution. Currently, both 'clean' and mixed systems are being deployed in Europe and around the world.^[19]

'Clean' ERTMS operation

Many new ERTMS lines in Europe are being created and then it may often be preferred to implement ERTMS Level 1 or Level 2 only. With this implementation strategy the wayside signalling cost is kept to a minimum, but the vehicle fleet that operates on these lines will need to all be equipped with ERTMS on board to allow operation. This is more suitable for new high-speed passenger lines, where new vehicles will be bought, less suitable if long-distance freight trains shall use it. Examples of 'clean' ERTMS operation include HSL-Zuid in the Netherlands, TP Ferro international stretch (Sección Internacional / Section Internationale) Figueres [ES] – Perpignan [FR], among others. Also all ERTMS railways in Sweden since the ERTMS and ATC balise frequencies are too close so that older trains would get faults when passing Eurobalises.

Mixed operation

Mixed operation is a strategy where the wayside signalling is equipped with both ERTMS and a conventional system. Often the conventional system is the legacy system used during the signalling upgrade program. The main purpose of introducing a mixed operation (mixed signalling system) are:

• For financial and operational reasons, it is impossible to install ERTMS for the complete network in a short period.
• Not every train is equipped to run on ERTMS lines and ERTMS-equipped trains cannot run only on new lines.
• Having a fall-back solution minimises the risk to the operation.

With mixed operation it is possible to run a line with both conventional and ERTMS trains and to use the advantages of ERTMS technology for the trains so equipped (e.g. higher speed or more trains on the line) but with the benefit that it is not necessary to equip the whole train fleet with ERTMS simultaneously. Examples of ERTMS in mixed operation include HSL 3 in Belgium where ERTMS is mixed with national ATP system or High-Speed Line Cordoba-Malaga in Spain^[20] where ERTMS is mixed with STM.

Operational principle of ERTMS in mixed operation: STM and ERTMS Level 2

The principle of mixed level signalling is based on simple principles using bi-directional data exchange between the radio block centre and the interlocking systems. The operator sets a route and does not need to know if the route will be used for a Level STM (LSTM) only or a Level 2-equipped train. A route is locked based on the national principles by the interlocking system and the RBC is informed about the routes set. The RBC checks whether it is possible to allocate a train to the route and then informs the interlocking system that a train is allocated to the route. The interlocking system shows the ERTMS white bar aspect to all signals along the route including the signal at the end of the route and sends no ATB-EG code to the track. The RBC sends a movement authority to the train if a Level 2 train is allocated to the route. Otherwise the signal shows the optical proceed aspect and the related ATB-EG code is sent to the track. As soon as a Level 2 train reports itself in rear of a route currently assigned for optical authorisation (e.g. after start of mission procedure or when the driver changes level from LSTM to Level 2), the optical authorisation is automatically upgraded to a Level 2 movement authority. Consequently, a Level 2 movement authority is downgraded to an optical authorisation after a predefined time-out if the driver closes the cab or a fault is detected that restricts the movement authority (e.g. if the GSM-R radio coverage is unavailable.)

See also

• European Rail Traffic Management System in Great Britain
• European Union Agency for Railways (former ERA)
• Interoperable Communications Based Signaling
• LOCOPROL
• Metrication of British transport
• UNIFE

References

1. ERTMS in 10 questions
2. "Comtest Wireless". Comtest Wireless.
3. "ERTMS - The European Railway Traffic Management System".
4. "ERTMS Level 1: Trackside on the Zaragoza-Huesca project". Alstom.com. September 2004. Retrieved 2008-07-04.
5. Chris Jackson (15 November 2007). "ERTMS: the view from the cab". Railway Gazette International.
6. "EC sets out ERTMS deployment deadlines". Railway Gazette International. 31 July 2009.
7. Archived 29 May 2008 at the Wayback Machine.
8. "Invensys Rail Group scoops New Zealand ERTMS signalling contract", 27 April 2009
9. "Massive three-day celebration inaugurates the Bothnia Line". Botniabanan. 9 September 2010.
10. "PIONEERING RAIL TECHNOLOGY GETS TESTED IN WALES". Network Rail. 12 February 2010.
11. "2017 start date for Great Western ERTMS upgrade". National Union of Rail, Maritime & Transport Workers. 9 October 2007.
12. "Auckland to install ETCS Level 1". Railway Gazette International. 28 April 2009.
13. "Ansaldo to signal Libya". Railways Africa. 20 August 2010.
14. "CAMBRIAN LINE ERTMS GETS GO-AHEAD". RAIL. 20 February 2011.
15. "ERTMS Regional for a safe and cost-effective railway" (PDF). Swedish Rail Administration. July 2009. Retrieved 27 April 2012.
16. "Västerdalsbanan, ERTMS Regional -" (in Swedish). Swedish Transport Administration. 15 February 2012. Retrieved 27 April 2012.
17. "Now or never for ERTMS in Europe, says Lochman". International Railway Journal. 25 April 2012. Retrieved 6 May 2012.
18. TT. "Prestigeprojekt för tågen skjuts upp". SvD.se (in Swedish).
19. ERTMS deployment map. UNIFE, Retrieved 2011-11-11
20. ERTMS Online Newsletter. European Communities, March 2008, Retrieved 2011-12-29

External links

• What is ERTMS? from UNIFE, the Union of the European Railway Industries.
• ERTMS National implementation plan UK Department for Transport, September 2007
• European Railway Agency
• "Rule Book Module S6 ERTMS Cab Signalling" (PDF) (Issue 1 ed.). London: Rail Safety & Standards Board. October 2009. GE/RT8000/S6 ERTMS.