ETX (form factor)

ETX, standing for Embedded Technology eXtended, is an integrated and compact 95 × 125 mm (3.7 × 4.9 in) computer-on-module (COM) form factor, which can be used in a design application much like an integrated circuit component. Each ETX COM integrates core CPU and memory functionality, the common I/O of a PC/AT (serial, parallel, etc.), USB, audio, graphics, and Ethernet. All I/O signals as well as a full implementation of ISA and PCI buses are mapped to four high-density, low-profile connectors on the bottom side of the module.

ETX boards are available with AMD Geode, VIA, Intel Atom, Pentium, Celeron and Core Duo processors.

XTX offers a 75% pin-compatible upgrade path to ETX standard. XTX drops the ISA bus and adds PCI-Express, SATA, and LPC.

COM Express was released in 2005 from PICMG.

History

The Embedded Technology eXtended (ETX) specification, first developed by Kontron (formerly *JUMPtec) in early 2000.

In April 2006, the members of the ETX Industrial Group released the next generation of the ETX 3.0 specification. The ETX Industrial Group (www.etx-ig.org) is an independent association of companies that work to exchange knowledge about ETX. Membership is open to companies which develop and produce ETX modules. Members include Kontron Embedded Modules GmbH, congatec AG, Advantech, MSC Vertriebs GmbH, ADLINK Technology Inc., Avalue Technology Inc., SECO Srl, Arbor Technology Corp., Axiomtek Co., Blue Chip Technology, AAEON Technology Inc., AEWIN Technologies IBase, Honeywell – CMSS and Portwell.

3.0 specification

The ETX 3.0 Specification is compact form factor, 95 x 114 mm (3.7 x 4.4 inches) in size. It extends the original ETX standard and adds two Serial ATA interfaces. This is done without changing any of the ETX pin designations, making new modules pin-to-pin compatible with previous versions.

Modules designed according to the ETX 3.0 specification integrate two SATA ports via two slim line connectors designed onto the top side of the CPU Module in the vicinity of X4. The module or carrier board ETX connectors do not require any changes to use the faster SATA hard drives.

ETX XTX COM Express
Dimensions 95 × 114 mm (3.7 × 4.5 in) 95 × 114 mm (3.7 × 4.5 in) (ETX footprint)
  • 110 × 155 mm (4.3 × 6.1 in) (extended)
  • 95 × 125 mm (3.7 × 4.9 in) (basic)
  • 95 × 95 mm (3.7 × 3.7 in) (compact)
  • 55 × 84 mm (2.2 × 3.3 in) (mini)
Legacy1 support Full legacy Legacy except ISA Legacy except ISA
PCI Express support - 4 Lanes up to 6 Lanes (basic)
PCI Express Graphic support - - up to 16 Lanes
Ethernet support 10/100 10/100 10/100/1000
IDE support 2 IDE, 2 SATA2 2 IDE, 4 SATA IDE, 4 SATA
LPC support - yes yes
USB support 4 USB 6 USB 8 USB
Audio support Line In/Out, Mic AC'97, Line In/Out, Mic AC'97, Line In/Out, Mic, AC'97 digital, HDA
Power 5V, 5VSB 5V, 5VSB 12V, 5VSB
Notes:
  1. "Legacy" is defined as the older PC peripherals and bus, such as ISA bus, RS-232 serial, IEEE 1284 parallel, floppy, and PS/2 keyboard & mouse.
  2. ETX 3.0 adds SATA via a topside connector on the board.

Mandatory features:

External links

This article is issued from Wikipedia - version of the 6/18/2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.