Gold code

This article is about binary codes used in telecommunications (CDMA) and GPS. For the authentication codes used to command a launch of nuclear weapons, see Gold Codes.

A Gold code, also known as Gold sequence, is a type of binary sequence, used in telecommunication (CDMA)[1] and satellite navigation (GPS).[2] Gold codes are named after Robert Gold.[3] Gold codes have bounded small cross-correlations within a set, which is useful when multiple devices are broadcasting in the same frequency range. A set of Gold code sequences consists of 2n 1 sequences each one with a period of 2n 1.

A set of Gold codes can be generated with the following steps. Pick two maximum length sequences of the same length 2n 1 such that their absolute cross-correlation is less than or equal to 2(n+2)/2, where n is the size of the LFSR used to generate the maximum length sequence (Gold '67). The set of the 2n 1 exclusive-ors of the two sequences in their various phases (i.e. translated into all relative positions) is a set of Gold codes. The highest absolute cross-correlation in this set of codes is 2(n+2)/2 + 1 for even n and 2(n+1)/2 + 1 for odd n.

The exclusive or of two different Gold codes from the same set is another Gold code in some phase.

Within a set of Gold codes about half of the codes are balanced  the number of ones and zeros differs by only one.[4]

Gold codes are used in GPS. The GPS C/A ranging codes are Gold code of period 1,023.

See also

References

Inline references
  1. George, M.; Hamid, M.; Miller, A. "Gold Code Generators in Virtex Devices" (PDF). Xilinx.com. Archived from the original (PDF) on July 5, 2008.
  2. "Transmitted GPS Signals". The GPS System. kowoma.de.
  3. "Robert Gold, BS, MS, Ph.D.". Robert Gold Comm Systems. 2011.
  4. Holmes 2007, p. 100
General references
This article is issued from Wikipedia - version of the 10/1/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.