HMCS Mulgrave

History
Canada
Name: Mulgrave
Namesake: Mulgrave, Nova Scotia
Builder: Port Arthur Shipbuilding Co, Port Arthur
Laid down: 15 December 1941
Launched: 2 May 1942
Commissioned: 4 November 1942
Decommissioned: 7 June 1945
Identification: Pennant number: J313
Fate:
General characteristics
Class and type: Bangor-class minesweeper
Displacement: 672 long tons (683 t)
Length: 180 ft (54.9 m) oa
Beam: 28 ft 6 in (8.7 m)
Draught: 9 ft 9 in (3.0 m)
Propulsion: 2 Admiralty 3-drum water tube boilers, 2 shafts, vertical triple-expansion reciprocating engines, 2,400 ihp (1,790 kW)
Speed: 16.5 knots (31 km/h)
Complement: 83
Armament:

HMCS Mulgrave (pennant J313) was a Bangor-class minesweeper that served with the Royal Canadian Navy during the Second World War. Entering service in 1942, the minesweeper took part in the Battle of the Atlantic and the invasion of Normandy. While sweeping for naval mines off France in 1944, the vessel hit one. The ship was towed back to port where Mulgrave was declared a constructive total loss. Laid up until the end of the war, the minesweeper was broken up in 1947.

Design and description

A British design, the Bangor-class minesweepers were smaller than the preceding Halcyon-class minesweepers in British service, but larger than the Fundy class in Canadian service.[1][2] They came in two versions powered by different engines; those with a diesel engines and those with vertical triple-expansion steam engines.[1] Mulgrave was of the latter design and was larger than her diesel-engined cousins. The minesweeper was 180 feet (54.9 m) long overall, had a beam of 28 feet 6 inches (8.7 m) and a draught of 9 feet 9 inches (3.0 m).[1][3] Mulgrave had a displacement of 672 long tons (683 t). She had a complement of 6 officers and 77 enlisted.[3]

Mulgrave had two vertical triple-expansion steam engines, each driving one shaft, using steam provided by two Admiralty three-drum boilers. The engines produced a total of 2,400 indicated horsepower (1,800 kW) and gave a maximum speed of 16.5 knots (30.6 km/h; 19.0 mph). The minesweeper could carry a maximum of 150 long tons (152 t) of fuel oil.[1]

Mulgrave was armed with a single quick-firing (QF) 12-pounder (3 in (76 mm)) 12 cwt HA gun mounted forward.[1][4][lower-alpha 1] The ship was also fitted with a QF 2-pounder Mark VIII aft and were eventually fitted with single-mounted QF 20 mm Oerlikon guns on the bridge wings.[5] The 2-pounder gun was later replaced with a twin 20 mm Oerlikon mount.[4] Those ships assigned to convoy duty had two depth charge launchers and four chutes to deploy the 40 depth charges they carried.[1][4]

Operational history

The minesweeper was ordered as part of the 1941-1942 construction programme.[4] The ship's keel was laid down on 15 December 1941 by Port Arthur Shipbuilding Co at their yard in Port Arthur, Ontario. Named for a community in Nova Scotia, Mulgrave was launched on 2 May 1942. The ship was commissioned on 4 November 1942 at Port Arthur.[6]

Mulgrave arrived at Halifax, Nova Scotia on 30 November and was assigned to Halifax Force, the local patrol and escort force. In June 1943, the ship switched to the Western Local Escort Force as a convoy escort as part of the escort group W2 in the Battle of the Atlantic. The minesweeper remained with the unit until February 1944, when the ship was sent to Europe as part of Canada's contribution to the invasion of Normandy. Crossing the Atlantic Ocean via the Azores, Mulgrave went went aground at Horta, Azores and had to be towed to Greenock, Scotland. The ship was repaired at Ardrossan before joining the 32nd Minesweeping Flotilla at Plymouth in April. In June, the ship transferred to the 31st Minesweeping Flotilla.[6]

During the invasion, the minesweepers swept and marked channels through the German minefields leading into the invasion beaches in the American sector, with Mulgrave acting as danlayer for the group.[7][8] The 31st Minesweeping Flotilla swept channel 3 on 6 June.[9] The minesweepers spent the following months clearing the shipping lanes between the United Kingdom and mainland Europe. On 8 October 1944, the 31st Minesweeping Flotilla was sweeping for mines off Le Havre, France when Mulgrave suffered an explosion. The minesweeper had hit a mine and after damage control efforts saved the ship, sister ship Blairmore took the vessel in tow and brought her to Le Havre.[10]

Mulgrave was towed to Portsmouth where the vessel was declared a constructive total loss. The Royal Canadian Navy placed the vessel in reserve at Falmouth in January 1945. Mulgrave was paid off on 7 June 1945 at Falmouth.[6] In May 1947, the minesweeper was taken to Llanelly, Wales, beached and broken up.[11][12]

References

Notes

  1. "Cwt" is the abbreviation for hundredweight, 20 cwt referring to the weight of the gun.

Citations

  1. 1 2 3 4 5 6 Chesneau, p. 64
  2. Macpherson and Barrie (2002), p. 167
  3. 1 2 Macpherson and Barrie (2002), p. 180
  4. 1 2 3 4 Macpherson (1997), p. 70
  5. Macpherson (1997), p. 58
  6. 1 2 3 Macpherson and Barrie (2002), p. 192
  7. Schull, pp. 233-34
  8. Douglas et al., A Blue Water Navy, p. 233
  9. Schull, pp. 270-73
  10. Douglas et al., A Blue Water Navy, p. 334
  11. Colledge, p. 427
  12. "Mulgrave (6113757)". Miramar Ship Index. Retrieved 12 November 2016. (subscription required (help)).

Sources

External links

This article is issued from Wikipedia - version of the 11/12/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.