Hungarian algorithm

The Hungarian method is a combinatorial optimization algorithm that solves the assignment problem in polynomial time and which anticipated later primal-dual methods. It was developed and published in 1955 by Harold Kuhn, who gave the name "Hungarian method" because the algorithm was largely based on the earlier works of two Hungarian mathematicians: Dénes Kőnig and Jenő Egerváry.[1][2]

James Munkres reviewed the algorithm in 1957 and observed that it is (strongly) polynomial.[3] Since then the algorithm has been known also as the Kuhn–Munkres algorithm or Munkres assignment algorithm. The time complexity of the original algorithm was , however Edmonds and Karp, and independently Tomizawa noticed that it can be modified to achieve an running time. Ford and Fulkerson extended the method to general transportation problems. In 2006, it was discovered that Carl Gustav Jacobi had solved the assignment problem in the 19th century, and the solution had been published posthumously in 1890 in Latin.[4]

Simple explanation of the assignment problem

In this simple example there are three workers: Armond, Francine, and Herbert. One of them has to clean the bathroom, another sweep the floors, and the third wash the windows, but they each demand different pay for the various tasks. The problem is to find the lowest-cost way to assign the jobs. The problem can be represented in a matrix of the costs of the workers doing the jobs. For example:

Clean bathroom Sweep floors Wash windows
Armond $2 $3 $3
Francine $3 $2 $3
Herbert $3 $3 $2

The Hungarian method, when applied to the above table, would give the minimum cost: this is $6, achieved by having Armond clean the bathroom, Francine sweep the floors, and Herbert wash the windows.

Setting

We are given a nonnegative n×n matrix, where the element in the i-th row and j-th column represents the cost of assigning the j-th job to the i-th worker. We have to find an assignment of the jobs to the workers that has minimum cost. If the goal is to find the assignment that yields the maximum cost, the problem can be altered to fit the setting by replacing each cost with the maximum cost subtracted by the cost.

The algorithm is easier to describe if we formulate the problem using a bipartite graph. We have a complete bipartite graph with worker vertices () and job vertices (), and each edge has a nonnegative cost . We want to find a perfect matching with minimum cost.

Let us call a function a potential if for each . The value of potential is . It can be seen that the cost of each perfect matching is at least the value of each potential. The Hungarian method finds a perfect matching and a potential with equal cost/value which proves the optimality of both. In fact it finds a perfect matching of tight edges: an edge is called tight for a potential if . Let us denote the subgraph of tight edges by . The cost of a perfect matching in (if there is one) equals the value of .

The algorithm in terms of bipartite graphs

During the algorithm we maintain a potential y and an orientation of (denoted by ) which has the property that the edges oriented from T to S form a matching M. Initially, y is 0 everywhere, and all edges are oriented from S to T (so M is empty). In each step, either we modify y so that its value increases, or modify the orientation to obtain a matching with more edges. We maintain the invariant that all the edges of M are tight. We are done if M is a perfect matching.

In a general step, let and be the vertices not covered by M (so consists of the vertices in S with no incoming edge and consists of the vertices in T with no outgoing edge). Let be the set of vertices reachable in from by a directed path only following edges that are tight. This can be computed by breadth-first search.

If is nonempty, then reverse the orientation of a directed path in from to . Thus the size of the corresponding matching increases by 1.

If is empty, then let . is positive because there are no tight edges between and . Increase y by on the vertices of and decrease y by on the vertices of . The resulting y is still a potential. The graph changes, but it still contains M. We orient the new edges from S to T. By the definition of the set Z of vertices reachable from increases (note that the number of tight edges does not necessarily increase).

We repeat these steps until M is a perfect matching, in which case it gives a minimum cost assignment. The running time of this version of the method is : M is augmented n times, and in a phase where M is unchanged, there are at most n potential changes (since Z increases every time). The time needed for a potential change is .

Matrix interpretation

Given workers and tasks, and an n×n matrix containing the cost of assigning each worker to a task, find the cost minimizing assignment.

First the problem is written in the form of a matrix as given below

where a, b, c and d are the workers who have to perform tasks 1, 2, 3 and 4. a1, a2, a3, a4 denote the penalties incurred when worker "a" does task 1, 2, 3, 4 respectively. The same holds true for the other symbols as well. The matrix is square, so each worker can perform only one task.

Step 1

Then we perform row operations on the matrix. To do this, the lowest of all ai (i belonging to 1-4) is taken and is subtracted from each element in that row. This will lead to at least one zero in that row (We get multiple zeros when there are two equal elements which also happen to be the lowest in that row). This procedure is repeated for all rows. We now have a matrix with at least one zero per row. Now we try to assign tasks to agents such that each agent is doing only one task and the penalty incurred in each case is zero. This is illustrated below.

0 a2'a3' a4'
b1'b2'b3' 0
c1' 0 c3'c4'
d1'd2' 0 d4'

The zeros that are indicated as 0' are the assigned tasks.

Step 2

Sometimes it may turn out that the matrix at this stage cannot be used for assigning, as is the case in for the matrix below.

0 a2'a3'a4'
b1'b2'b3'0
0 c2'c3'c4'
d1'0 d3'd4'

In the above case, no assignment can be made. Note that task 1 is done efficiently by both agent a and c. Both can't be assigned the same task. Also note that no one does task 3 efficiently. To overcome this, we repeat the above procedure for all columns (i.e. the minimum element in each column is subtracted from all the elements in that column) and then check if an assignment is possible.

In most situations this will give the result, but if it is still not possible then we need to keep going.

Step 3

All zeros in the matrix must be covered by marking as few rows and/or columns as possible. The following procedure is one way to accomplish this:

First, assign as many tasks as possible.

Alternatively, the 0 in row 3 may be assigned, causing the 0 in row 1 to be crossed instead.

0'a2'a3'a4'
b1'b2'b3' 0'
0 c2'c3'c4'
d1' 0' 0 d4'

Now to the drawing part.

×
0'a2'a3'a4' ×
b1'b2'b3'0'
0 c2'c3'c4' ×
d1'0' 0d4'

Now draw lines through all marked columns and unmarked rows.

×
0'a2'a3'a4' ×
b1'b2'b3'0'
0 c2'c3'c4' ×
d1'0' 0d4'

The aforementioned detailed description is just one way to draw the minimum number of lines to cover all the 0s. Other methods work as well.

Step 4

From the elements that are left, find the lowest value. Subtract this from every unmarked element and add it to every element covered by two lines.

Repeat steps 3–4 until an assignment is possible; this is when the minimum number of lines used to cover all the 0s is equal to the max(number of people, number of assignments), assuming dummy variables (usually the max cost) are used to fill in when the number of people is greater than the number of assignments.

Basically you find the second minimum cost among the remaining choices. The procedure is repeated until you are able to distinguish among the workers in terms of least cost.

Bibliography

References

  1. Harold W. Kuhn, "The Hungarian Method for the assignment problem", Naval Research Logistics Quarterly, 2: 83–97, 1955. Kuhn's original publication.
  2. Harold W. Kuhn, "Variants of the Hungarian method for assignment problems", Naval Research Logistics Quarterly, 3: 253–258, 1956.
  3. J. Munkres, "Algorithms for the Assignment and Transportation Problems", Journal of the Society for Industrial and Applied Mathematics, 5(1):32–38, 1957 March.
  4. http://www.lix.polytechnique.fr/~ollivier/JACOBI/jacobiEngl.htm

External links

Implementations

(Note that not all of these satisfy the time constraint.)

Language
C implementation with time complexity
Java implementation of time variant
Python implementation
Ruby implementation with unit tests
C# implementation with time complexity
D implementation with unit tests (port of the Java version)
Online interactive implementation Please note that this implements a variant of the algorithm as described above.
Graphical implementation with options (Java applet)
Serial and parallel implementations.
Matlab and C
Perl implementation
C++ (STL) implementation (multi-functional bipartite graph version)
C++ implementation
C++ implementation of the algorithm (BSD style open source licensed)
Java implementation with JUnit tests (Apache 2.0)
MATLAB implementation
C implementation
JavaScript implementation with unit tests (port of the Java version)
Clue R package proposes an implementation, solve_LSAP
Node.js implementation on GitHub
This article is issued from Wikipedia - version of the 12/1/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.