Malaccamax

Malaccamax is defined by the Strait of Malacca, Malaccamax tankers can carry oil from the Persian Gulf to China.
General characteristics
Tonnage: 300,000 DWT
Length: 333 m (1,093 ft)
Beam: 60 m (197 ft)
Draft: 20.5 m (67 ft)

Malaccamax is a naval architecture term for the largest size of ship capable of fitting through the 25-metre-deep (82 ft) Strait of Malacca. Bulk carriers and supertankers have been built to this size, and the term is chosen for very large crude carriers (VLCC). They can transport oil from Arabia to China.[1] A typical Malaccamax tanker can have a maximum length of 333 m (1,093 ft), beam of 60 m (197 ft), draught of 20.5 m (67.3 ft), and tonnage of 300,000 DWT.[2]

Similar terms Panamax, Suezmax and Seawaymax are used for the largest ships capable of fitting through the Panama Canal, the Suez Canal and Saint Lawrence Seaway, respectively. Aframax tankers are those with a deadweight tonnage of 80,000 to 120,000.

Problems

Some Chinamax and most Capesize and very large crude carriers cannot pass this strait. Ships such as Suezmax and New Panamax can pass. Any post-Malaccamax ship would need to use even longer alternate routes because traditional seaways such as the Sunda Strait, between the Indonesian islands of Java and Sumatra would become too shallow for large ships. Other routes would therefore be required:[3]

Artificially excavated new routes might also be a possibility:

See also

References

  1. "Malacca-max Oil Tanker Delivered" (Press release). NKK Corporation. September 2002.
  2. Fukai, Takashi; Kuma, Yasumitsu; Tabira, Makoto. "Development of Malaccamax Very Large Crude-oil Carriers" (PDF). Mitsubishi Heavy Industries Technical Review. Retrieved 9 June 2014.
  3. Pleistocene Sea Level Maps: Southeast Asia and Sundaland


This article is issued from Wikipedia - version of the 7/17/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.