Melbourne Water
Agency overview | |
---|---|
Formed | 1992 |
Jurisdiction | Government of Victoria |
Headquarters | Melbourne, Victoria, Australia |
Agency executives |
|
Website | www.melbournewater.com.au |
Melbourne Water is a government owned statutory authority that controls much of the water system in Melbourne, Victoria, Australia including the reservoirs, and the sewerage and drainage system that services the city.
Overview
Melbourne Water is wholly owned by the Victorian State Government. It manages Melbourne's water supply catchments, sewage, rivers and major drainage systems throughout the Port Phillip and Westernport region. Governance of Melbourne Water is by an independent Board of Directors in conjunction with the Minister for Water. Customers include the metropolitan retail water businesses (such as City West Water, South East Water and Yarra Valley Water.[1]), other water authorities, local councils and the land development industry.[2] Melbourne water primarily operates under the Water Industry Act 1994 and the Water Act 1989.[3] Melbourne Water was formed by the merger of Melbourne and Metropolitan Board of Works and a number of smaller urban water authorities in 1992. The Victorian Water Industry Association (VicWater) is the peak industry association for water companies in Victoria. In 1994, Melbourne Parks and Waterways was separated from Melbourne Water, which became part of Parks Victoria in 1996.
History
Melbourne received its first piped water, from the Yan Yean Reservoir, in 1857.[4][5] Water shortages in the late 1870s led to the construction of the Toorourrong scheme in 1882–1885,[6] and the Maroondah Aqueduct in 1886–1891. In 1888 a large part of the upper Yarra valley was reserved for water supply purposes.[7]
In 1891, the Melbourne and Metropolitan Board of Works (MMBW) was formed to manage Melbourne's water supply system. Its responsibility covered the Yan Yean Reservoir (supplemented by the Toorourrong Scheme), the first stage of the Maroondah Scheme and six metropolitan service reservoirs.
MMBW continued to augment Melbourne's water supply with diversions from upland tributaries of the Yarra River. The Maroondah Scheme was extended with a pipeline diversion from Coranderrk Creek (1908). A diversion weir on the O'Shannassy River was completed in 1914 and replaced by the O'Shannassy Reservoir in 1928. Maroondah Reservoir was completed in 1927, replacing a diversion weir upstream of the site.
Silvan Reservoir was completed in 1932 to regulate the increased flows in the O'Shannassy Aqueduct from the Upper Yarra River and Coranderrk Creek diversions. Water flowed out of Silvan Reservoir through the Mount Evelyn Aqueduct; the aqueduct was later replaced by pipes but is still visible in places with the Mount Evelyn Aqueduct Walk alongside.
The diversion of water from the Upper Yarra River commenced in 1939 with a weir upstream of the present dam and an aqueduct and pipeline to the O'Shannassy Aqueduct.[4] The Upper Yarra Dam was completed in 1957, increasing Melbourne's total storage capacity to nearly 300,000 megalitres. While the Upper Yarra Project was being built, a 1.7-metre diameter pipeline from a basin near Starvation Creek to Silvan Reservoir was completed in 1953. A duplicate pipeline of the same diameter was completed in 1964.
In response to the severe drought of 1967–68, the diversion of Starvation, McMahons, Armstrong and Cement Creeks commenced between 1968 and 1971.
A reservoir was completed at Greenvale in 1971, with a capacity of 27,000 megalitres, to meet the growing need in the western suburbs, especially during summer.
Following the 1967–68 drought, construction of Cardinia Reservoir was started in 1969 with it being filled to its 287,000-megalitre capacity in 1977, bringing Melbourne's total storage capacity to 610,000 megalitres.
To improve transfer capacity between Upper Yarra and Silvan reservoirs, and to enable water harvested from the Thomson River to be transferred to Cardinia Reservoir, the 2.1-metre diameter Yarra Valley Conduit and Silvan-Cardinia main were built in 1975.
In 1969 work commenced on diverting part of the flow of the Thomson River in Gippsland into the Upper Yarra River catchment. The final stage of the Thomson project concluded in May 1983 with an extension of the Thomson-Yarra Tunnel and completion of the dam wall. Thomson Reservoir has a storage capacity of 1,068,000 megalitres.
The Sugarloaf Reservoir Project, including a major pumping station and water treatment plant, was completed in 1981, increasing Melbourne's total storage capacity by 95,000 megalitres. Sugarloaf uses water pumped from the Yarra River at Yering Gorge and water transferred from Maroondah Reservoir via the Maroondah aqueduct. Sugarloaf is important in meeting peak summer demand in the northern parts of Melbourne.
In 1991, the Melbourne and Metropolitan Board of Works was merged with a number of smaller urban water authorities to form Melbourne Water.
In 2008, work commenced on the North South Pipeline from northern Victoria's Eildon and Goulburn Valley area to Melbourne. Another project being planned to avert a water shortage in Melbourne is a desalinisation plant to be built at Kilcunda, south-east of Melbourne.
Water restrictions
Melbourne Water has a system of restrictions to manage water supplies into the future. It reports on storage levels on Thursday each week[8] while an interactive graph compares actual use. Further reviews of restrictions will be needed to counter an ongoing drought, poor rainfall, record low storage levels and rising water use compared with past years. An overview of Australian water restrictions (including Melbourne Water) is found here.
Infrastructure
The water supply system operated and managed by Melbourne Water comprises:
- catchments covering more than 140,000 hectares.
- ten major storage reservoirs with a capacity of 1,810,500 megalitres.
- 64 service reservoirs that provide short-term storage.
- about 1300 kilometres of distribution mains and aqueducts.
- 18 water pumping stations, used to pump water from low-lying areas to higher areas.
- five water filtration plants.
- 49 water treatment (disinfection) plants.
Water storages
Melbourne Water manages the ten Melbourne reservoirs outlined in the table below. Total storage capacity is 1,810,500 megalitres.[9]
Reservoir | Capacity (ML) | Year completed | Location |
---|---|---|---|
Thomson | 1,068,000 | 1983 | 37°50′34″S 146°23′56″E / 37.84278°S 146.39889°E |
Sugarloaf | 96,000 | 1981 | 37°40′30″S 145°18′18″E / 37.6749°S 145.3051°E |
Cardinia | 287,000 | 1973 | 37°57′49″S 145°24′37″E / 37.9637°S 145.4102°E |
Greenvale | 27,000 | 1971 | 37°37′53″S 144°54′17″E / 37.63139°S 144.90472°E |
Tarago | 37,500 | 1969 | 38°1′S 145°56′E / 38.017°S 145.933°E |
Upper Yarra | 200,000 | 1957 | 37°41′S 145°55′E / 37.683°S 145.917°E |
Silvan | 40,000 | 1932 | 37°50′S 145°25′E / 37.833°S 145.417°E |
O'Shannassy | 3,000 | 1928 | 37°40′30″S 145°48′20″E / 37.67500°S 145.80556°E |
Maroondah | 22,000 | 1927 | 37°38′05″S 145°33′47″E / 37.63472°S 145.56306°E |
Yan Yean | 30,000 | 1857 | 37°33′S 145°08′E / 37.550°S 145.133°E |
Water supply catchments
Around 80% of Melbourne's water is sourced from uninhabited forests in the Yarra Ranges and Central Highlands. In excess of 1,570 square kilometres is reserved for water catchment. These forests primarily consist of Mountain Ash. Catchment areas have been closed to the public for over 100 years .[10][11][12]
Major catchment areas are:[12]
- Wallaby — 9100 ha (within the Kinglake National Park), 1.9 per cent inflow
- Maroondah — 16540 ha (within the Yarra Ranges National Park), 10.8 per cent inflow
- O'Shannassy — 11870 ha (within the Yarra Ranges National Park), 11.4 per cent inflow
- Upper Yarra — 33670 ha (within the Yarra Ranges National Park), 18.7 per cent inflow
- Yarra Tributaries (Armstrong, Cement, McMahons and Starvation Creeks) — 13480 ha (State Forest), 3.8 per cent inflow
- Thomson — 48700 ha (mainly State Forest and small section Baw Baw National Park), 35.3 per cent inflow
- Sugarloaf — water is pumped from the Yarra River and fully treated, 10.7 per cent inflow
In addition to the reservoirs in the table above, water is harvested via a number of diversion weirs:
Clearfell logging is permitted in the Yarra Tributaries and Thomson catchment areas. Some studies claims this reduces Melbourne's water supply arguing that young regrowth forest uses more water than existing forest[13][14][15] Some environmental groups claim that up to 30 thousand megalitres of water could be saved per annum by phasing out logging. This represents 6% of Melbourne's annual usage.[16]
Seawater Desalination Plant
The Seawater Desalination Plant is a $(AUS)3.1 billion desalination plant that was built in the Wonthaggi region of the Bass Coast.[17] The plant can provide an additional 150 gigalitres of water each year.[18][19] Construction commenced in mid-2009.[20] This project represents the single biggest boost to Melbourne's water system since the approval of the Thomson Dam in 1975. While this project will supply water for Melbourne, it is being managed by the Department of Sustainability & Environment (DSE) as a Public-private partnership (PPP). DSE awarded the tender for design, build and operation to another company who will in turn supply the water to Melbourne Water.
Northern Sewerage Project
Northern Sewerage Project is a major infrastructure project to increase the capacity of the sewerage system in Melbourne's growing northern suburbs. It will also help protect the Merri and Moonee Ponds Creeks by virtually eliminating sewage overflows that can occur after heavy rain.
See also
- Lakes and Reservoirs in Melbourne
- List of reservoirs and dams in Australia
- Western Treatment Plant
- Eastern Treatment Plant
- Australasian Fire and Emergency Service Authorities Council
External links
- Melbourne Water
- Yarra Valley Water
- South East Water
- City West Water
- Victorian Water Industry Association (VicWater)
References
- ↑ Melbourne Water : About Us : Our Customers : Our Customers
- ↑ http://www.melbournewater.com.au/content/library/about_us
- ↑ Melbourne Water : About Us : Who We Are : Who We Are
- 1 2 Ritchie, E. G. (October 1934), "Melbourne's Water Supply Undertaking", Journal of Institution of Engineers Australia, 6: 379–382, archived from the original (PDF) on 2011-04-05
- ↑ Gibbs, George Arthur (1915), Water supply systems of the Melbourne and Metropolitan Board of Works / compiled from official documents by George A. Gibbs, Melbourne: D. W. Paterson
- ↑ "Melbourne Water Supply", The Argus, p. 5, 1888-01-17, retrieved 2011-04-23
- ↑ "Melbourne Water Supply - Important Additions to the Watershed Areas", The Argus, p. 11, 1888-05-31, retrieved 2011-07-21
- ↑ http://www.melbournewater.com.au/content/water/weekly_water_update/weekly_water_update.asp
- ↑ Melbourne Water : Water : Water Storages : Water Storages
- ↑ "Water Catchments". Melbourne Water. Retrieved 2011-11-22.
- ↑ Department of Primary Industries. "Water Supply Catchment Protection". dpi.vic.gov.au. Retrieved 30 September 2011.
- 1 2 Dudley, Nigel; Stolton, Sue; Asante-Owusu, Rachel (2003), Running pure: the importance of forest protected areas to drinking water (PDF), World Bank/WWF Alliance for Forest Conservation and Sustainable Use, pp. 74–77, ISBN 978-2-88085-262-7, retrieved 2011-11-22
- 1 2 3 4 5 6 7 8 9 10 11 Feikema, Paul; Lane, Patrick; Peel, Murray; Sherwin, Chris; Freebairn, Andrew; Salkin, Owen (October 2006), Hydrological studies into the impact of timber harvesting on water yield in state forests supplying water to Melbourne – Part 1 of Hydrological studies, eWater Cooperative Research Centre Part 1a Part 1b
- ↑ Logging rainforest within the Melbourne's domestic water supply catchments, Victorian Rainforest Network
- ↑ National water week demonstrations expose logging in Melbourne's water supply, The Wilderness Society
- ↑ http://www.tcha.org.au/water.html
- ↑ Rood, David (2008-02-04). "In the eye of the storm". The Age. Melbourne.
- ↑ Melbourne Water : Current Projects : Water Supply : Seawater Desalination Plant : Seawater Desalination Plant
- ↑ Microsoft Word - 132863.doc
- ↑ Our Water, Our Future - Desalination Plant