Metropolitan Railway G Class
Metropolitan Railway G Class
LNER Class M2
|
Specifications |
---|
Configuration |
0-6-4T |
---|
Gauge |
4 ft 8 1⁄2 in (1,435 mm) standard gauge |
---|
Driver dia. |
5 ft 9 in (1.753 m) |
---|
Trailing dia. |
3 ft 6 in (1.067 m) |
---|
Wheelbase |
28 ft 9 in (8.763 m) |
---|
Axle load |
18.65 long tons (18.95 t; 20.89 short tons) |
---|
Loco weight |
71.05 long tons (72.19 t; 79.58 short tons) |
---|
Fuel type |
Coal |
---|
Fuel capacity |
4.5 long tons (4.6 t; 5.0 short tons) |
---|
Water cap |
2,000 imp gal (9,100 l; 2,400 US gal) |
---|
Firebox: • Firegrate area |
21.4 sq ft (1.99 m2) |
---|
Boiler pressure |
160 psi (1.1 MPa) |
---|
Heating surface: • Tubes |
281 sq ft (26.1 m2) |
---|
• Flues |
281 sq ft (26.1 m2) |
---|
• Firebox |
142 sq ft (13.2 m2) |
---|
Superheater:
|
|
---|
• Heating area |
197 sq ft (18.3 m2) |
---|
Cylinders |
2 (inside) |
---|
Cylinder size |
20 in × 26 in (508 mm × 660 mm) |
---|
Valve gear |
Stephenson |
---|
|
|
|
The Metropolitan Railway G Class consisted of four 0-6-4T steam locomotives, numbered 94 to 97.[1] They were built by Yorkshire Engine Company in 1915. The class was unusual in carrying names as well as numbers, and were the last Metropolitan steam locomotives to do so.
Service
The G Class were used on various duties on the Metropolitan Railway mainline until 1937 when all four were transferred to the LNER. The LNER numbered them 6154–6157 and classified them as M2 Class. Two survived to the 1946 renumbering.[2]
Withdrawal
All were withdrawn and scrapped between 1943 and 1948.
Names and numbers
Table of names and numbers[1]
Number | Name | LNER No. | 1946 No. | Withdrawn |
94 | Lord Aberconway | 6154 | Allocated No. 9075, but withdrawn before re-numbering | 1946 |
95 | Robert H. Selbie | 6155 | 9076 | 1948 |
96 | Charles Jones | 6156 | 9077 | 1948 |
97 | Brill | 6157 | | 1943 |
References
External links