Simulator ride

A typical motion ride simulator mounted on a trailer to make it mobile.

Simulator rides are a type of amusement park or fairground ride, where the audience is shown a movie while their seats move to correspond to the action on screen.

There are many types but they fall into the heading of entertainment unlike the ones used for training. Simulator rides work by showing a film and moving at the same time. This information is fixed and cannot be changed without rewriting the ride's firmware. A film or experience can be made of any subject as they are created manually. A film of any given subject is given to the manufacturer who records movement to go with a film, you then end up with a video source and a movement disk, this can be preloaded onto a computer or manually set up using a floppy disk so when the film and disk are placed in the system it is controlled by a computer and a controller to make the film start at the same time as the motion.

History

Until recently, constructing simulator rides was an expensive, high tech business. The first simulators were built to train military pilots. Long before the days of virtual reality, the view through the cockpit came from remote video cameras which moved on gantries above physical model landscapes. These model landscapes were huge, often the size of aircraft hangars. By the mid-1990s, computer virtual reality graphics replaced most physical models in simulators. Today's flight training simulators, like NASA’s, have virtual landscapes projected on multiple screens giving a 180 degree view. Much simpler simulators, running fixed video synchronised to the movement of the 'cabin', were introduced in funfairs in the same period. They seat about 12 people and require an operator.

Universal Studios originally invented the motion theater with their attraction The Funtastic World of Hanna-Barbera. Disney uses a similar plan and opened their Star Tours attraction in 1987. Universal's attraction did not open until 1990. This first ride was soon followed by the Back to the Future-themed Back to the Future: The Ride, which opened in 1991 at Universal Studios Florida and was removed in 2007 to make way for The Simpsons Ride.

Motion Theaters

Passenger motion simulators are used as amusement rides with a seating platform remaining parallel to the ground while being moved in a circular motion along a vertical plane. Larger scale motion theaters include "Air Time" at Carowinds, "Corkscrew Hill" at Busch Gardens Williamsburg, The Amazing Adventures of Spider-Man at Universal's Islands of Adventure, Star Tours at Disney's Hollywood Studios, Mission: SPACE at Epcot, The Simpsons Ride at Universal Studios Florida, and the now closed Akbar's Adventure Tours in Busch Gardens Tampa Bay. Motion theaters found in a traveling carnival include the "Yellow Submarine."

Personal simulator rides

More recently, one- to two-person simulator rides have appeared. These run unattended and some types are interactive, like the original military flight training simulators. Unlike the military, however, most civilian similators are totally passive and have a choice of rides from which the user selects. The most advanced simulators are in totally enclosed capsules giving a much more immersive ride and allowing the person to be fully engaged in the simulation. The more recent two seaters, produced in 2005, have special effects added. These include fans which blast wind on the rider's face as the simulation goes faster, and heaters which heat the cabin when there is a virtual explosion or fire or a similar heat source is displayed on screen. Other effects include vibrations which add to the ride's realism. Due to the exclusivity of this type of simulator ride, there are only a few two seater simulator manufacturers in the world.

The first truly low-cost simulator is perhaps the £5k "Kidicoaster," which swings up and down in sync to a video of a roller coaster.

It is now practical for amateur enthusiasts to develop their own 'low tech' simulator ride. The motion and effects can be controlled by a micro controller (like a Stamp or an Arduino) and the video played on an ordinary DVD player. The micro controller only has to switch the play button on the player and the video and motion will then stay adequately in synch for the duration of the ride.

4DX

Since first developed in 2009, 4DX movie theaters have been growing in popularity. These theaters show mainstream Hollywood films combined with moving seats and other special effects to enhance the experience of the film.

Installations

Always at Clatcton pier: Morphin (spaceship simulator)

This article is issued from Wikipedia - version of the 9/23/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.