Nested function

In computer programming, a nested function (or nested procedure or subroutine) is a function which is defined within another function, the enclosing function. Due to simple recursive scope rules, a nested function is itself invisible outside of its immediately enclosing function, but can see (access) all local objects (data, functions, types, etc.) of its immediately enclosing function as well as of any function(s) which, in turn, encloses that function. The nesting is theoretically possible to any ideas of depth, although only a few levels are normally used in practical programs.

Nested functions are used in many approaches to structured programming, including early ones, such as ALGOL, Simula 67 and Pascal, and also in many modern dynamic languages and functional languages. However, they are traditionally not supported in the (originally simple) C-family of languages.

Effects

Nested functions assumes function scope or block scope. The scope of a nested function is inside the enclosing function, i.e. inside one of the constituent blocks of that function, which means that it is invisible outside that block and also outside the enclosing function. A nested function can access other local functions, variables, constants, types, classes, etc. that are in the same scope, or in any enclosing scope, without explicit parameter passing, which greatly simplifies passing data into and out of the nested function. This is typically allowed for both reading and writing.

Nested functions may in certain situations (and languages) lead to the creation of a closure. If it is possible for the nested function to escape the enclosing function, for example if functions are first class objects and a nested function is passed to another function or returned from the enclosing function, then a closure is created and calls to this function can access the environment of the original function. The frame of the immediately enclosing function must continue to be alive until the last referencing closure dies and non-local automatic variables referenced in closures can therefore not be stack allocated. This is known as the funarg problem and is a key reason why nested functions was not implemented in some simpler languages as it significantly complicates code generation and analysis, especially when functions are nested to various levels, sharing different parts of their environment.

Examples

An example using Pascal syntax (with ALGOL, Modula 2, Oberon, Ada, etc. similar):

function E(x: real): real;
    function F(y: real): real;
    begin
        F := x + y
    end;
begin
    E := F(3) + F(4)
end;

The function F is nested within E. Note that E's parameter x is visible also in F (as F is a part of E) while both x and y are invisible outside E and F respectively.

Similarly, in Standard ML:

fun e (x : real) =
  let
    fun f y = x+y
  in
    f 3 + f 4
  end;

One way to write the same example in Haskell syntax:

e :: Float -> Float
e x = f 3 + f 4 where f y = x + y

The same example in GNU C syntax (C extended with nested functions):

float E(float x)
{
    float F(float y)
    {
        return x + y;
    }
    return F(3) + F(4);
}

Quicksort

A more realistic example is this implementation of quicksort:[1]

void sort(int *a, int size) {
    void quickSort(int first, int last) {
        void swap(int p, int q) {

            int tmp = a[p];

            a[p] = a[q];

            a[q] = tmp;

        }
        
        int partition() {
            int pivot = a[first], index = first;
            swap(index, last);
            for (int i = first; i < last; i++) if (a[i] < pivot) swap(index++, i);
            swap(index, last);
            return index;
        }

        if (first < last) {
            int pivotIndex = partition();
            quickSort(first, pivotIndex - 1);
            quickSort(pivotIndex + 1, last);
        }
    }
    quickSort(0, size - 1);
}

Purpose

Lexically nested function definitions are a form of information hiding and are useful for dividing procedural tasks into subtasks which are only meaningful locally. This avoids cluttering other parts of the program with functions and variables that are unrelated to those parts.

They are typically used as helper functions or as recursive functions inside another function (as in the quicksort example above). This has the structural benefit of organizing the code, avoids polluting the scope, and also allows functions to share state easily.[2] As nested function can access local variables of the enclosing function, sharing of state is possible without passing parameters to the nested function or use a global variable, simplifying code.

In languages with nested functions, functions may normally also contain local constants, and types (in addition to local variables, parameters, and functions), encapsulated and hidden in the same nested manner, at any level of depth. This may further enhance the code structuring possibilities.

Other uses

Nested functions can also be used for unstructured control flow, by using the return statement for general unstructured control flow. This can be used for finer-grained control than is possible with other built-in features of the language – for example, it can allow early termination of a for loop if break is not available, or early termination of a nested for loop if a multi-level break or exceptions are not available.

Alternatives

The main alternative to nested functions in languages that lack support for them is to place all relevant functions and variables in a separate module (file) and expose only the top-level wrapper function publicly. In C this will generally be done by using static functions for encapsulation and static variables for communication.[3] This achieves encapsulation and sharing of state, though not the logical organization given by lexical nesting of functions, and comes at the cost of having a separate file. It is also not possible in more than a single level.

Another alternative is to share state between the functions through function parameters, most often passing references as arguments to avoid the cost of copying. In C this is generally implemented by a pointer to a structure containing the context.[3] This significantly increases the complexity of the function calls.[2]

In PHP and other languages the anonymous function is the only alternative: the nested function is declared not as usual function, but by reference, as a local variable. To use local variables in the anonymous function, use closure.

Languages

Well known languages supporting lexically nested functions include:

Functional languages

In most functional programming languages, such as Scheme, nested functions are a common way of implementing algorithms with loops in them. A simple (tail) recursive inner function is created, which behaves as the algorithm's main loop, while the outer function performs startup actions that only need to be done once. In more complex cases, a number of mutually recursive functions may be created as inner functions.

Some languages without direct support

Certain languages do not have straightforward syntactic and semantic support to implement nested functions. Nevertheless, for some of them the idea of nested functions can be simulated with some degree of difficulty through the use of other language constructs. The following languages can approximate nested functions through the respective strategies:

Implementation

See also: Man or boy test

Implementation of nested functions can be more involved than it may appear, as a reference to a nested function that references non-local variables creates a closure. For this reason nested functions are not supported in some languages such as C, C++ or Java as this makes compilers more difficult to implement.[3][7] However, some compilers do support them, as a compiler specific extension. A well known example of this is the GNU C implementation of C which shares code with compilers for languages such as Pascal, Ada and Modula.

Access of non local objects

There are several ways to implement nested procedures in a lexically scoped language, but the classic way is as follows:

Any non-local object, X, is reached via access-links in the activation frames on the machine stack. The caller, C, assists the called procedure, P, by pushing a direct link to the latest activation of P's immediate lexical encapsulation, (P), prior to the call itself. P may then quickly find the right activation for a certain X by following a fixed number (P.depth - X.depth) of links (normally a small number).
The caller creates this direct link by (itself) following C.depth - P.depth + 1 older links, leading up to the latest activation of (P), and then temporarily bridging over these with a direct link to that activation; the link later disappears together with P, whereby the older links beneath it may come into use again.
Note that P is visible for, and may therefore be called by, C if (P) = C / (C) / ((C)) / etc.

This original method is faster than it may seem, but it is nevertheless often optimized in practical modern compilers (using displays or similar techniques).

Another way to implement nested functions that is used by some compilers is to convert ("lift") nested functions into non-nested functions (where extra, hidden, parameters replace the access links) using a process known as lambda lifting during an intermediate stage in the compilation.

Functions as values

In order for local functions with lexically scoped nonlocals to be passed as results, the language runtime code must also implicitly pass the environment (data) that the function sees inside it's encapsulating function, so that it is reachable also when the current activation of the encosing function no longer exists.[8] This means that the environment must be stored in another memory area than (the subsequently reclaimed parts of) a chronologically based execution stack, which, in turn, implies some sort of freely dynamic memory allocation. Many older Algol based languages (or dialects thereof) does therefore not allow local functions that access nonlocals to be passed as return values, or do they not allow functions as return values at all, although passing of such functions as arguments may still be possible.

See also

Notes

    References

    1. ↑ Re: Nesting functions- Why?, baavgai, 14 January 2012
    2. 1 2 Bright 2004.
    3. 1 2 3 "Question 20.24: Why doesn't C have nested functions?, comp.lang.c FAQ
    4. ↑ "Nested Functions - Using the GNU Compiler Collection (GCC)". GNU Project. Retrieved 2007-01-06.
    5. ↑ http://www.rosettacode.org/wiki/Nested_function#C.23
    6. ↑ http://www.rosettacode.org/wiki/Nested_function#Java
    7. ↑ answer by Dave Vandervies, Aug 28 '09 at 17:45, to "Why are nested functions not supported by the C standard?"
    8. ↑ Such a combination of function code and its environment is sometimes called a closure.

    External links

    This article is issued from Wikipedia - version of the 12/4/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.