Nissan SR engine

Nissan SR engine
Overview
Manufacturer Nissan Motor Company
Production 19892002
Combustion chamber
Configuration Inline Four Cylinder
Displacement 1.6L
1.8L
2.0L
Valvetrain DOHC
Chronology
Predecessor Nissan CA engine
Successor Nissan QG engine
Nissan QR engine

The Nissan SR engine is a 1.6 L, 1.8 L, or 2.0 L straight-4 4-stroke internal combustion gasoline engine manufactured by Nissan Motors. It features an aluminum head and aluminum block with steel sleeves and features a DOHC 4-valve design, with variable valve timing on select models. The engine was used in many small to medium Nissan vehicles including high-performance turbocharged variants. It was designed by Nissan as a replacement for the earlier CA series of engines. Power output shown is JIS Net PS or ECE Net kilowatts unless otherwise indicated.


SR18Di

The SR18Di is a 1.8 L (1838 cc) DOHC engine. It produces 110 PS (81 kW) @6500 rpm and 150 nm @4000 rpm. Based on the Single Point Fuel Injection system, it was installed on JDM cars and some UK versions. This model used some cast iron blocks and it was used on the P10 generation Nissan Primera, but due to the low overall power this engine option was dropped on the next generation.

This engine was never used on the USDM counterpart the Infiniti G20

It is used in the following vehicles:

SR18DE

The SR18DE is a 1.8 L (1838 cc) DOHC engine. It produces 125 PS (92 kW) @6000 rpm and 156 Nm @4800 rpm. This engine came with Multi Point Fuel Injection System ECCS (Electronic Concentrated Control System).

It was used in the following vehicles;

SR20Di

The SR20Di is a 2.0 L (1998 cc) DOHC engine. It produces 122 PS (89 kW). Bore and stroke are 86 mm (3.4 in) and 86 mm (3.4 in). Similar to the 1.8 liter version except for bigger displacement with a throttle body injection system.

It is used in the following vehicles:

SR20DE

SR20DE engine from a 2001 Infiniti G20.

The Nissan SR20DE engine was used in over 15 Nissan models. It first appeared in October 1989, and over time it was gradually phased out with the introduction of the QR (low-emissions) engine family. The SR20DE carried nominal power ratings between 130 and 169 Horsepower (96 to 120 kW) from the factory.

The breakdown of the engine code is as follows:

This engine has the following specifications (SAE, 1991)

The Specs
Type: Water cooled, 4 cycle in-line 4 cylinder
Combustion Chamber: Cross flow, pentroof type
Valve mechanism: DOHC, 4 valves per cylinder, chain drive
Displacement: 1998cc
Bore x Stroke: 86.0 x 86.0mm
Bore Pitch: 97.0mm
Block Height: 211.3mm
Compression ratio: 9.5:1
Crankshaft journal diameter: 55.0mm
Crankpin diameter: 48.0mm
Con rod length: 136.3mm
Valve diameters: Intake: 34.0mm, Exhaust: 30.0mm
Dimensions: 685 x 610 x 615mm
Maximum power: 140 hp-169 hp at 6400 rpm (SAE net)
Maximum torque: 132 lb·ft at 4800 rpm (SAE net)

It was used in the following vehicles:

Model Years Produced
180SX 1991–1992, 1994–1997
200SX SE-R 1995–1998
Almera 1996–1999
Avenir 1990, 1992–1995, 1997–2001
Bluebird 1989, 1991–1993, 1995–1998
Liberty 1998–2000
Infiniti G20 1991–2002
NX2000 1991–1996
Prairie Joy 1995–1997
Presea 1990–1993, 1995, 1997–1998
Primera 1990–2002
Pulsar 1991–2000
R'nessa 1997–1998, 2000
Rasheen 1998
Sentra 1991–1994, 1998–2001
Serena 1991–1995, 1997–2000
Silvia 1991–1993, 1995-1996, 1998–2002
Wingroad 1996–1999

SR20DET

P11 2.0

Main article: Nissan SR20DET

Origins

U13 Bluebird SR20DET. (FWD/AWD layout)

The SR20DET was first produced in the U12 Nissan Bluebird 2000SSS Attesa in October 1989 . From 1990 through to 1994 it was used in the Nissan Pulsar GTi-R (RNN14) however with a bigger T28 turbo. In both these cars the engine is aligned in a transverse fashion.

However the RWD Nissan Silvia produced from 1991 were built with a longitudinally aligned SR20DET.

The engine was used in the Nissan Avenir in 1995, the Nissan R'nessa in 1997 and the Nissan Liberty in 1999.

Out of all the Nissan models produced with the SR20DET, the Silvia was the longest running model to use it. The S14 and S15 use a bigger turbocharger than the S13 models.

Valve cover colors

The colors of the valve covers seem to be related to the year the engine was released.

Color Model Years
Red S13/180SX/Bluebird/Pulsar 1989–1994
Blue S13/180SX 1994–1998
Black S14/S15 1994–2002
Silver Avenir/R'nessa 1995–2001/1997-2002

It was available in the following vehicles:

SR16VE

Nissan SR16VE engine

The 1.6 L (1596 cc) SR16VE has Nissan's Neo VVL variable valve timing with lift control. It produces 175 hp (130 kW) @7800 rpm and 119 lb·ft (161 Nm) @7200 rpm. Redline is at 8300 rpm. Bore is 86 mm and the stroke is 68.7 mm

It is used in the following vehicles:

SR16VE N1

This version was used in the limited-production Pulsar VZ-R N1, produced from 1997 to 1998. These cars were tuned by Autech Japan. It made 200 PS (197 bhp.)(147 kW) @ 7800 rpm and 134 lb·ft (181 Nm) @ 7600 rpm. Redline of the N1 Version 2 (1998) is at 8600 rpm. This is also claimed to be the most powerful production 1.6l naturally aspirated engine.

SR20VE

SR20VE

The 2.0 L SR20VE has Nissan's Neo VVL variable valve timing with lift control. It produces 190 PS (139 kW) @7000 rpm and 144 lb·ft (196 Nm) @6000 rpm and later (2001–2003) 205 PS (150 kW) @7200 rpm and 206 nm @5200 rpm. Used in:

SR20VET

SR20VET

Available only in the Japanese market is the 2.0 L (1998 cc) SR20VET was the first turbocharged engine from Nissan with variable timing and lift control. It produces 280 PS (206 kW) @ 6400 rpm and 309 nm @ 3200 rpm with 9.0:1 Compression Ratio.

It is used in the following vehicles:

Camshaft Lift and Duration

Manufacturer Type Duration [°] Lift [mm] Engine Notes
Nissan Intake 232 8.66 Stock low-port SR20DE (1985-2012)
Nissan Intake 248 10.00 Stock high-port SR20DE (1991-1993)
Nissan Exhaust 240 9.2 Stock Pulsar GTi-R (specific) SR20DET
Nissan Intake 240 10.0 Stock Pulsar GTi-R (specific) SR20DET
Nissan Exhaust 248 10.0 Stock Pulsar GTi-R (specific) SR20DET
Nissan Intake 232 10.0 Stock Roller Rocker SR20DE (2000-up)
Nissan Exhaust 240 9.2 Stock Roller Rocker SR20DE (2000-up)
Jim Wolf Technology Intake 260 11.3 S3 – All S-series cams work with stock valve train. There is also a S3 grind for the GTi-R.
Jim Wolf Technology Exhaust 260 11.3 S3 – All S-series cams work with stock valve train. There is also a S3 grind for the GTi-R.
Jim Wolf Technology Intake 262 11.43 S3 roller grind, for late-model roller-rocker heads only
Jim Wolf Technology Exhaust 262 11.43 S3 roller grind, for late-model roller-rocker heads only
Jim Wolf Technology Intake 266 11.8 S4
Jim Wolf Technology Exhaust 266 11.8 S4
Jim Wolf Technology Intake 264 12.1 C1 – All C-series cams require upgraded valve springs and retainers
Jim Wolf Technology Exhaust 264 12.1 C1 – All C-series cams require upgraded valve springs and retainers
Jim Wolf Technology Intake 275 12.7 C2
Jim Wolf Technology Exhaust 275 12.7 C2
Jim Wolf Technology Intake 285 13.36 C3
Jim Wolf Technology Exhaust 285 13.36 C3

See also

References

This article is issued from Wikipedia - version of the 11/28/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.