RMS Atrato (1853)

This article is about the RMSP's 1853 paddle steamer Atrato. For the RMSP's later screw steamer, see RMS Atrato (1888).
"SS Atrato of the Royal Mail Steam Packet Company",
painted by William Frederick Mitchell
History
United Kingdom
Name:
  • Atrato (1853–80)
  • Rochester (1880–84)
Namesake:
Owner:
  • RMSP Co (1853–70)
  • John Morrison & Co (1872–79)
  • Henry T Horn (1879–80)
  • Adamson & Ronaldson (1880–84)
Operator: Aberdeen Line (1872–)
Route: Southampton – Caribbean (1853–70)
Builder: Caird & Company, Greenock
Yard number: 26
Launched: 26 April 1853
Identification: UK official number 13926
Fate: sank 1884
General characteristics
Type: iron-hulled steamship
Tonnage:
Length:
  • 1853: 350 feet (110 m)
  • 1872: 335.9 feet (102.4 m)
Beam:
  • 1853: 42 feet (13 m),
  • 72 feet (22 m) over paddles
  • 1872: 42.4 feet (12.9 m)
Installed power:
  • 1853: 800 ihp
  • 1872: 350 horsepower
Propulsion:
Sail plan: 3-masted barquentine
Speed: 10 knots (19 km/h)

RMS Atrato was a UK iron-hulled steamship. She was built in 1853 for the Royal Mail Steam Packet Company as a side-wheel paddle steamer, and when completed was the World's largest passenger ship. She was a Royal Mail Ship until 1870.[1]

In 1870 RMSP traded her in and in 1872 she was converted to a single screw ship with a compound steam engine. From 1872 Aberdeen Line chartered her to run to Victoria and New Zealand. In 1880 she was renamed Rochester. She sank in 1884.

Demerara and Amazon

Until 1850 RMSP secured its first contract to carry mail between the UK, Brazil and the River Plate. It ordered five large new wooden-hulled sister ships to take over scheduled services on its premier route between Southampton and the Caribbean, thus releasing older RMSP ships to start its new service to Rio de Janeiro, Montevideo and Buenos Aires.

One of the new ships, the 2,318 NRT Demerara, was built in Bristol by William Patterson Shipbuilders, but her engined were built by Caird & Company of Greenock. After her launch in November 1851 a steam tug started to tow from Bristol to Greenock for her engines to be installed. But the tug master lacked experience of the winding Avon and lost control of Demerara, which became wedged against both banks. When the tide went out the ship was left bridging the river, and suffered structural distortion from the 1,200 tons of ballast in her engine room.[2]

RMSP rejected the damaged ship, which was effectively a "constructive total loss" – a concept then unknown in marine insurance.[3] RMSP was then left with one ship missing from the quintet it needed for its new service, and an engine in Greenock with no ship into which to put it.

Until 1851 the Admiralty had insisted that ships for mail contracts had to have a wooden hull. However, two months after Demerara's accident RMS Amazon, another member of the new quintet, caught fire and sank in the Bay of Biscay on her maiden voyage. More than 100 passengers and crew were killed and the Admiralty agreed to allow iron-hulled ships to be used for mail services.

Atrato with RMSP

RMSP duly ordered an iron-hulled ship from Caird & Company to use Demerara's engines and fill one of the gaps in the new fleet. In design she was an improved, enlarged, iron-hulled version of Demerara. The engine was a two-cylinder side-lever steam engine that developed 800 ihp and drove a pair of side paddles, giving her a speed of 10 knots (19 km/h). For some reason Caird did not use Demerara's boilers for Atrato but supplied new ones.[3]

Atrato was completed in 1853 and entered service between Southampton and the Caribbean. In April 1856 she and two other RMSP ships, La Plata and Tay, attended the Spithead Review to celebrate the end of the Crimean War.[4]

By 1869 Atrato was outdated for RMSP's use. John Elder and Company of Govan built a new ship, Elbe for the company and in 1870 accepted Atrato in part-payment.[5]

After RMSP

Later in 1870 John Morrison and Company of London bought Atrato. In 1872 Aberdeen Line chartered her to run between Britain and Port Phillip, Victoria via Cape Town.[1] James Watt and Company of London re-engined her as a single-screw vessel with a two-cylinder compound engine[1] fed by three double-ended boilers.[6] Her first such voyage to Port Phillip was in September 1872. In 1874 she sailed to New Zealand, leaving London on 5 April, calling at Port Chalmers on 8 June and reaching Lyttelton Harbour on 20 June.[6]

In 1879 Henry T Horn of Sidcup, Kent bought Atrato. In 1880 Adamson and Ronaldson of Rochester, Kent bought her and renamed her Rochester. In 1884 she sank,[1] but neither the date nor her final position is known.

References

  1. 1 2 3 4 Cameron, Stuart; Buxton, Ian; Biddulph, Bruce; Allan, Bruce; Asprey, David. "ps Atrato". Clydebuilt Ships Database. Retrieved 22 January 2015.
  2. ↑ Nicol 2001, p. 43.
  3. 1 2 Nicol 2001, p. 44.
  4. ↑ Nicol 2001, p. 54.
  5. ↑ Nicol 2001, pp. 67, 81.
  6. 1 2 Whitehouse, Olwyn. "'s.s. Atrato' 1874". New Zealand Bound. RootsWeb. Retrieved 23 April 2013.

Sources

This article is issued from Wikipedia - version of the 12/4/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.