Saxon VII T
VII T DR 98 7051 to 98 7079 | |
---|---|
Quantity | 42 |
Manufacturer | Sächsische Maschinenfabrik, Chemnitz |
Year(s) of manufacture | 1882 – 1894 |
Retired | by 1967 |
Axle arrangement | B n2t |
Gauge | 1,435 mm (4 ft 8 1⁄2 in) |
Empty weight | 19.0 t – 20.7 t |
Service weight | 24.6 t – 26.7 t |
Adhesive weight | 24.6 t – 26.7 t |
Axle load | 12.3 t – 10.4 t |
Driving wheel diameter | 1,100 mm (3 ft 7 in) |
Valve gear | Allan |
No. of cylinders | 2 |
Cylinder bore | 355 mm (14.0 in) |
Piston stroke | 530 mm (21 in) |
Boiler Overpressure | 12 atm |
No. of heating tubes | 98 |
Heating tube length | 3,170 mm (10 ft 5 in) |
Grate area | 0.9 m2 (9.7 sq ft) |
Tube heating area | 39.0 m2 (420 sq ft) |
Evaporative heating area | 43.5 m2 (468 sq ft) |
Water capacity | 2.9 m3 (640 imp gal) |
Fuel | 0.9 t |
Locomotive brakes | Counterweight brake |
The Saxon Class VII T were twin-coupled tank engines of the Royal Saxon State Railways designed for branch line (Sekundärbahn) operations. In 1925, the Deutsche Reichsbahn grouped these locomotives 1925 into their Class 98.70.
History
The Royal Saxon State Railways grouped all 0-4-0 locomotives into their Class VII T. As well as several engines that came from nationalised railway companies, this class also included 43 units procured by the Royal Saxon Railways themselves.
42 largely identical locomotives were delivered by the Sächsische Maschinenfabrik, formerly Richard Hartmann, to the city of Chemnitz in the period from 1882 to 1894. Initially they were classified as H VII T, but from 1896 just as VII T.
Common to the different delivery batches were driving wheel diameters of 1,130 mm and axle bases of 2,200 mm. The length of the locomotive and the height of the centre of the boiler above the rails were also identical on all models. The locomotives of the last two batches had a steam dome, whilst the older ones just had a Regleraufsatz.
In 1925, the Deutsche Reichsbahn took over 29 locomotives of this type. Five dated to 1882/83 (98 7051 – 98 7055), eleven to 1886 (98 7056 – 98 7066), nine to 1890 (No. 98 7067 – 98 7075) and four to the year 1894 (98 7076 – 98 7079).
![](../I/m/Liesel_02-04-2011_S%C3%A4chsische_VII_T_Hegel.jpg)
In 1931, no. 98 7069 became an industrial engine at the repair shop at Chemnitz, but was transferred to the Deutsche Reichsbahn fleet in 1951 as 98 7051. It was not decommissioned until 1967. Other long-serving engines were nos. 98 7065 and 98 7066 served until 1966.
The locomotive with number 98 7056 (formerly 1431 HEGEL) has survived. Until 1964 it belonged to the depot of Dresden-Altstadt and was then given to the Dresden Transport Museum. For many years it was part of their permanent exhibition. Today it has been stored in a museum depot in the old Bw Dresden-Altstadt and is maintained by the Dresden-Altstadt Depot Railway Museum.[1]
H VII T (98 7031)
VII T No. 1418 DR 98 7031 | |
---|---|
Technical data where different | |
Number | 1 |
Entered service | 1889 |
Retired | 1927 |
Length over buffers | 7,160 mm |
Driving wheel diameter | 1,220 mm |
Top speed | 45 km/h |
Adhesive weight | 213.9 kN |
Service weight | 213.9 kN |
Another engine built in 1889 by the Sächsischen Maschinenfabrik with running number 1418 differed from the other H VII T stock in that it had a longer axle base (2,500 mm), larger coupled wheels and a higher top speed of 45 km/h. It also had a lower overall weight.
This locomotive also joined the Deutschen Reichsbahn fleet in 1925, as 98 7031. Until 1927 it was used as a shed loco in Bw Leipzig Hbf.
See also
References
- ↑ "Hegel". igbwdresdenaltstadt.de (in German). Archived from the original on March 9, 2009.
Literature
- Näbrich, Fritz; Meyer, Günter; Preuß, Reiner (1983). Lokomotivarchiv Sachsen 2 (in German). Berlin: Transpress VEB Verlag für Verkehrswesen.
- Preuß, Erich; Preuß, Rainer (1991). Sächsische Staatseisenbahnen (in German). Berlin: Transpress Verlagsgesellschaft mbH. ISBN 3-344-70700-0.