Subic International Raceway

Subic International Raceway
Location Zambales, Philippines
Time zone UTC+8
FIA Grade 4
Major events Asian F3 Series
Length 2.8 km

Subic International Raceway is a racing circuit in the Philippines, built in 1994 on the site of a US naval base destroyed by eruption of Mount Pinatubo. Established through the efforts of famed race car driver Pocholo Ramirez,[1] the site was bought by Sport Values Inc.

The racing circuit is built over the fuel farm and refueling installation at the old Naval Air Station in Cubi Point. It caters well for spectators, with a close infield in front of the pits and viewing areas, with several combinations of corners. These are followed by a short grandstand straight, a series of esses, and then two long straights both with fast corners halfway, alongside the main runway, now the Subic Bay International Airport. Since then, the improvement and development of the track and competence of its officials has been at a constant pace. It gained FIM approval in 1997 and its grade four FIA license in 1998.

The track is 2.8 kilometres in length with 12 turns and has a 12 metre wide bitumen surface. Subic Bay has hosted South East Asia's Premier motorcycle, touring car and formula car events. The Marlboro Asia Pacific Road Racing Championship, Asian Festival of Speed (AFOS) featuring the Southeast Asian Touring Car Zone Challenge (SEATCZC) and the Asian Formula 2000 have all raced here, and it also hosts the Asian 1600 Touring Car Invitational Cup, the Philippine Japan Invitational Historic Car Races and the Hong Kong Classic Car Races. The major visitor to the track today is the Asian F3 Series.

Notes

  1. Pinky Concha Colmenares (2009-03-20). "Pocholo Ramirez, the Racing Legend". Manila Bulletin. Retrieved 2009-03-27.

Coordinates: 14°47′52″N 120°16′26″E / 14.79778°N 120.27389°E / 14.79778; 120.27389

This article is issued from Wikipedia - version of the 8/13/2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.