Teletype Model 37

Teletype Model 37. On display at the Living Computer Museum in Seattle, Washington.

The Teletype Model 37 is an electromechanical teleprinter manufactured by the Teletype Corporation in 1968.[1] Unfortunately the end was approaching for electromechanical user interfaces and a year later in 1969 the Computer Terminal Corporation introduced the electronic terminal with a screen.

Features

The Model 37 came with many features including upper- and lowercase letters, reverse page feed for printing charts, red and black ink and could print 150 Baud (15 characters/second) and optional tape and punch reader. This made it 50% faster than its predecessor the Model 33.[1]

The Model 37 terminal utilizes a serial input / output 10 unit code signal consisting of a start bit, seven information bits, an even parity bit and a stop bit. It was produced in ASR (Automatic Send and Receive)also known as the Model 37/300, KSR (Keyboard Send and Receive) also known as the Model 37/200 and RO (Receive Only) also known as the Model 37/100.[2]

The Model 37 handles all 128 ASCII code combinations.[3] It uses a six-row removable typebox with provisions for 96 type pallet positions. When the Shift-Out feature is included, the six-row typebox is replaced with a seven-row typebox allowing 112 pallet positions, or it can be replaced with an eight-row typebox allowing 128 type pallet positions.

Technical Specifications

Fun Facts

References

  1. 1 2 3 "Exhibits - Living Computer Museum". www.livingcomputermuseum.org. Retrieved 6 July 2016.
  2. 1 2 3 Teletype Model 37 Product Catalog (April 1969 ed.). Skokie, Illinois: Teletype Corporation. 1969.
  3. 1 2 Meet the Teletype Model 37. Skokie, Illinois: Teletype Corporation. 1968.
  4. Teletype Model 37 Terminals. Skokie, Illinois: Teletype Corporation. 1969.

Further reading

This article is issued from Wikipedia - version of the 9/14/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.