Tetraamminecopper(II) sulfate

Tetraamminecopper(II) sulfate
Names
IUPAC name
Tetraamminecopper(II) sulfate monohydrate
Other names
cuprammonium(II) sulfate; cupric sulfate, ammoniated
Identifiers
14283-05-7 YesY
ECHA InfoCard 100.155.305
PubChem 61513
Properties
[Cu(NH3)4(H2O)n]SO4
Molar mass 245.79 g/mol
Appearance dark blue-purple solution or crystals
Odor Ammonia
Density 1.81 g/cm3
Boiling point 330 °C (626 °F; 603 K)[1]
18.5 g/100 g (21.5 °C)[2]
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
YesY verify (what is YesYN ?)
Infobox references

Tetraamminecopper(II) sulfate is the inorganic compound with the formula [Cu(NH3)4(H2O)n]SO4. This dark blue solid is a metal complex with faint odor of ammonia. It is closely related to Schweizer's reagent, which is used for the production of cellulose fibers in the production of rayon. It is used to print fabrics, used as a pesticide and to make other copper compounds like copper nano-powder.

Synthesis

This compound can be prepared by adding concentrated solution of ammonia to a saturated aqueous solution of copper sulfate followed by precipitation of the product with ethanol.[2]

NH3 + CuSO4 → [Cu(NH3)4(H2O)n]SO4

Chemical Reaction and Solubility

The deep blue crystalline solid tends to hydrolyse and evolve (release) ammonia upon standing in air.[2] It is fairly soluble in water. The brilliant dark blue-violet color of tetraamminecopper(II) sulfate solution is due to presence of [Cu(NH3)4]2+. Often, the dark blue-violet color is used as a positive test to verify the presence of Cu2+ in a solution.

Structure and Properties

The solid state salt of tetraammine copper (II) sulfate contains the [Cu(NH3)4H2O]2+, which has a square pyramidal molecular geometry. The bond length between the atoms in the crystal are measured using X-ray crystallography; the Cu-N and Cu-O distances are about 210 and 233 pm.[3] Cu(NH3)The correct concentrations of ammonia and copper sulfate solution can be determined by colorimetry. The combination of the correct concentrations will produce the highest absorbance read out on the colorimeter and as a result the formula of the complex can be verified.

Corrosion

The characteristic deep blue colour of the tetraammine complex is found in brass and copper alloys where attack from ammonia has occurred leading to cracking. The problem was first found in ammunition cartridge cases when they were stored near animal waste, which produced trace amounts of ammonia. This type of corrosion is known as season cracking.

Uses

As already mentioned the closely related Schweizer's reagent is used for the production of cuprammonium rayon.

Most pesticides contain ammonium sulfate. Ammonium sulfate is used as an agricultural spray adjuvant for water-soluble insecticides, herbicides, and fungicides. There, it functions to bind iron and calcium cations that are present in both well water and plant cells. It is particularly effective as an adjuvant for 2, 4-D (amine), glyphosate, and glufosinate herbicides.[1] The brilliant dark blue-violet color and a good solubility make tetraammine copper (II) sulfate an excellent chemical to dye fabrics. Some of the recent research and development for copper include various studies of tetraaminecopper (II) sulfate. One such research is “Chemical reduction method for preparing copper nano-powder with high purity using sodium hypophosphite as reductant”, which uses tetraaminecopper (II) sulfate.

Other Properties

The magnetic and thermal properties of tetraammine copper (II) sulfate monohydrate have been extensively studied and have been interpreted as those of a substance containing a magnetic linear chain structure. In 1967, Saito & Kanda conducted proton nuclear magnetic resonance studies on this material in the paramagnetic and ordered state. Unfortunately, the lack of proton positions prevented a quantitative interpretation of these data. Since the early crystallographic study by Mazzi (1955) reported a structure based on projected data and indicated an unusual coordination about the copper ion, a detail structure determination was considered necessary for any future quantitative interpretation of the observed resonance data.[4]


An ammonia solution of tetraamminecopper(II) sulfate.

References

  1. 1 2 American Elements – The material science company; tetraammine copper(II) sulfate monohydrate; CAS 10380-29-7
  2. 1 2 3 O. Glemser, H. Sauer "Tetraamminecopper (II) Sulfate" Handbook of Preparative Inorganic Chemistry, 2nd Ed., Academic Press, 1963, NY. Vol. 1. p. 1021.
  3. Morosin "The Crystal Structures of Copper Tetraammine Complexes. A. Cu(NH3)4SO4.H2O and Cu(NH3)4SeO4" Acta Crystallogr. 1969, vol. B25, pp. 19-30. doi:10.1107/S0567740869001725
  4. Li, Yudan; Wang, Wenjie; He, Chuan.; Chemical reduction method for preparing copper nanopowder with high purity using sodium hypophosphite as reductant, Faming Zhuanli Shenqing, Dec 4, 2013, CN 103418801
This article is issued from Wikipedia - version of the 8/26/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.