Type 1 Chi-He
| Type 1 Chi-He | |
|---|---|
|
Type 1 Chi-He | |
| Place of origin | Empire of Japan |
| Production history | |
| Designed | 1940 |
| Produced | 1943–1944 |
| Number built | 170 |
| Specifications | |
| Weight | 17.2 tonnes (19.0 tons)[1] |
| Length | 5.5 m (18 ft 1 in) |
| Width | 2.2 m (7 ft 3 in) |
| Height | 2.38 m (7 ft 10 in) |
| Crew | 5 |
|
| |
| Armor | 20–50 mm[1] |
Main armament | Type 1 47 mm tank gun[1] |
Secondary armament |
2 × 7.7mm Type 97 light machine gun (hull, coaxial) |
| Engine |
Mitsubishi Type 100 air cooled V-12 diesel[2] 240 hp (179 kW)/2,000 rpm/21,700 cc[1] |
| Suspension | Bell crank |
Operational range | 210 kilometers[1] |
| Speed | 44 km/h (27 mph) |
The Type 1 medium tank Chi-He (一式中戦車 チへ Ichi-shiki chusensha Chihe) was an improved version of the Type 97 Chi-Ha medium tanks of the Imperial Japanese Army in World War II. It had a more powerful main gun, engine and thicker armor. It was the first Japanese tank to have a communication radio as standard equipment. Production of the tank did not begin until 1943, due to the higher priority of steel allocated to the Imperial Navy for warship construction. A total of 170 units were built. All of the tanks produced were allocated for the defense of the Japanese home islands, against the anticipated Allied Invasion.
History and development
After 1941, the Imperial Japanese Army quickly realized that its 1930s designed medium tank, the Type 97 Chi-Ha, was inferior to the 1940s generation of Allied armor, such as the M4 Sherman. Since the Type 97’s low-velocity 57 mm main gun was designed for infantry support in 1938, it could not penetrate the 1940s generation of Allied armor, whereas its own thin armor made the Type 97 vulnerable to most adversaries equipped with anti-armor capabilities.[3]
In response, a new series of tanks based on an improved Type 97 design was conceived. The first of this new series was the Type 1 Chi-He. Work on the design began in 1941.[4] However, production did not begin until 1943, due to the higher priority of steel allocated to the Imperial Navy for warship construction.[5] A total of 170 units were built from 1943–44, and they did not see any combat.[6][7]
Design
Compared to the Type 97, the Type 1 Chi-He was slightly longer and taller. Its angled, thicker frontal armor was welded, as opposed to riveted. The adding of the frontal armor and a fifth crewman increased the weight, but the "streamlining" of the hull reduced the increase to only 1.5 tons.[8]
The Mitsubishi Type 100 diesel engine at 240 hp provided 70 hp more power than the Mitsubishi Type 97 diesel engine, and was thus more than able to compensate for the additional weight in armor.[4]
The Type 1 Chi-He's 47 mm high-velocity gun had a barrel length of 2.250 m, a muzzle velocity of 810 m/s (2,700 ft/s), and a penetration capability of 55 mm/100 m, 40 mm/500, 30 mm/1,000 meters; over double that of the Type 97s low-velocity main gun.[9] It was more reliable and more accurate, but did require the installation of elevation gear (on the earlier Type 97 the gunner had to physically move the gun up or down on his shoulder). In light of these improvements, the gun was adequate against Allied armor.[6] The ammunition was the same as used with the anti-tank version of the gun.[10] The tanks carried 120 rounds of ammunition with both armor-piercing and armor-piecing high explosive shells.[8] The gun was placed in a three-man turret, which had space for the commander, gun-layer and loader.[8] The gun could be elevated and depressed between +20 and -15 degrees. This gun was used in the Type 97-Kai Shinhoto Chi-Ha tank, and on the Type 3 Ka-Chi Amphibious Tank.
The Type 1 Chi-He was also the first Japanese tank to carry a radio as standard equipment in each tank, eliminating the need to use signal flags.[11]
Combat record
All of the Type 1s were allocated to the Japanese home islands to defend against the projected Allied Invasion.[12] Despite Type 1's superiority in terms of armor and firepower over the earlier Type 97, it still underperformed against the American M4 Sherman, leading to a new design known as the Type 3 Chi-Nu.[13]
After the end of World War II, Type 1 Chi-He tanks captured by the Soviet Red Army were turned over to the Communists Chinese army for use in the Chinese Civil War. After victory, the People's Liberation Army continued to use them in their inventory.[1]
Variants
- Type 1 Ta-Ha Self-propelled Anti-Aircraft Gun
- A prototype version with twin 37 mm anti-aircraft guns fitted in place of the 47 mm gun was built, but did not go into production.
Notes
- 1 2 3 4 5 6 Tomczyk 2007, p. 22.
- ↑ Hara 1972, p. 18
- ↑ Foss, Great Book of Tanks
- 1 2 Zaloga 2007, p. 20.
- ↑ Zaloga 2007, p. 15.
- 1 2 History of War: Type 1 Chi-He Medium Tank
- ↑ Zaloga 2007, p. 17.
- 1 2 3 Tomczyk 2007, p. 20.
- ↑ Taki's Imperial Japanese Army: "Tank Guns"
- ↑ Hara 1972, p. 18
- ↑ Tomczyk 2007, p. 21.
- ↑ Zaloga 2007, p. 21.
- ↑ Zaloga 2007, pp. 21, 22.
References
- Foss, Christopher (2003). Great Book of Tanks: The World's Most Important Tanks from World War I to the Present Day. Zenith Press. ISBN 0-7603-1475-6.
- Foss, Christopher (2003). Tanks: The 500. Crestline. ISBN 0-7603-1500-0.
- Hara, Tomio (1972). Japanese Medium Tanks. AFV Weapons Profiles No. 49.
- Tomczyk, Andrzej (2007) [2002]. Japanese Armor Vol. 2. AJ Press. ISBN 978-8372371119.
- Zaloga, Steven J. (2007). Japanese Tanks 1939–45. Osprey. ISBN 978-1-84603-091-8.
External links
.svg.png){kind=small} Japanese armored fighting vehicles of World War II | |
|---|---|
| Tankettes | |
| Light tanks | |
| Medium tanks | |
| Amphibious tanks | |
| Self-propelled artillery (including tank destroyers) | |
| Armored cars | |
| Other | |
| Prototypes | |