Union Switch & Signal

Union Switch & Signal
Public
Industry Rail transport
Fate Acquired by Ansaldo STS S.p.A. in 1988.
Predecessor Union Electric Signal, Interlocking Switch & Signal
Successor Ansaldo STS USA, Inc.
Founded 1881
Founder George Westinghouse
Headquarters Pittsburgh, U.S.
Area served
 Worldwide
Products Railway signalling equipment, communication systems and services, grade crossing signals
Number of employees
 900 (2005)

Union Switch and Signal (US&S) is a supplier of railway signaling equipment, systems and services in Pittsburgh, Pennsylvania. As of January 1, 2009, US&S is known as Ansaldo STS USA.

History

Mechanism of a searchlight signal made by Union Switch & Signal in 1944 for the Rock Island Railroad.

George Westinghouse founded Union Switch & Signal in 1881, consolidating the assets of the Union Electric Signal Company (founded by track circuit inventor William Robinson)[1] and the Interlocking Switch & Signal Company (which had pioneered interlockings).[2] In 1925 US&S acquired the Hall Signal Company, primarily to obtain the latter company's patents for searchlight signals.[3]

Corporate management

US&S operated as an independent company until 1917, when it became a subsidiary of the Westinghouse Air Brake Company (WABCO). In 1968, American Standard purchased WABCO and reorganized US&S as a separate division.[4]

In 1988, Ansaldo purchased US&S from American Standard.[5] In November 1993, US&S became a publicly traded company with shares listed on Nasdaq.[2] In December 1996, US&S merged with the other signaling investments of Ansaldo. As a result of that merger, US&S is now a wholly owned subsidiary of Ansaldo STS, a global supplier of signaling, control and automation systems.[2] The company was renamed Ansaldo STS – USA in January 2009.[6]

Throughout its history, US&S had manufacturing facilities in the borough of Swissvale, Pennsylvania, near Pittsburgh. The Swissvale plant was closed in 1985 and demolished in 1986.[7] US&S moved manufacturing operations to a facility in Batesburg-Leesville, South Carolina.[5] It maintained a research facility in Pittsburgh.[8] Other facilities include a service and repair shop in Kingston, Ontario.

US&S vertical color light signal on the New York City Subway

Product development

Railway signalling

US&S built the first power interlocking system in the United States, a pneumatic design, in 1882 at East St. Louis, Illinois. Within several years the company developed an electro-pneumatic system, which was widely adopted by railroads across the country.[9]

In 1901 US&S developed the first electro-pneumatic automatic train stop system for the Boston Elevated Railway. This system was later adopted by the New York City Subway and other transit systems.[10] In 1908 the company introduced an electrically-controlled highway crossing gate.[11]

In 1923 US&S developed the first inductive train control system. (See also pulse code cab signaling.) The company developed coded track circuits, supporting bi-directional cab signalling, in 1934.[2]

The first digital rail yard control system was built by US&S in 1970, for the Atchison, Topeka & Santa Fe railway at Kansas City, Kansas.[2]

The first mechanical bell

US&S first patented the Model 15A Highway crossing bell on February 20, 1917. The bell has been commonly referred to as the "Teardrop" bell by railroaders and signal fans alike because of its unique shape and thus the name has stuck. This bell has appeared on advertising literature for railroad signals as far back as the 1920s as far abroad as Chile and Italy on early wig wag crossings and flashers. There have been subtle variations in the Teardrop bell over the years ranging from different sized electric coils, inclusion of the patent date on the rain hood, as well as a very early version with a less characteristic rain hood that simply read "UNION, patent pending." This is the most commonly seen variation of the Teardrop. This bell is treasured by many for its slow low pitched ring at an irregular cadence. The production of this bell was discontinued sometime by the 1960s, but WABCO carried replacement castings and service manuals into the 1970s.

Wartime production

Union Switch and Signal was one of the five contractors (including Colt, Remington-Rand, Ithaca Gun Company, and Singer Sewing Machine) to make M1911A1 pistols during World War II. The production blocks assigned to them in 1943 were between SN's 1,041,405 to 1096404. Colt duplicated 4,171 pistols in the 1088726-1092896 SN range. Since only 55,000 1911A1's were produced by US&S, they are highly collectible. The reason for the low production numbers is US&S was the last company awarded a government contract and as requirements were reduced in early 1943, the last contract awarded became the first to be cancelled. As a general rule, US&S produced high quality pistols. With the government-owned machine tooling already in place at US&S, they were offered a subcontract arrangement to produce M1 Carbine components. Only Singer produced fewer 1911A1's at 500 total production.[12]

Modern products

US&S Model 14 power interlocking machine (1922)
Model 14 electro-pneumatic interlocking, installed 1930 at Harris Switch Tower, Pennsylvania for the Pennsylvania Railroad

* They are the only company to make 180 degree electronic bells.

Clients

US&S position light signal

See also

References

  1. ↑ American Railway Association (1922). The Invention of the Track Circuit. New York. p. 59.
  2. 1 2 3 4 5 "History of Ansaldo - key milestones". Ansaldo STS. 2011-05-13. Archived from the original on 2011-11-10.
  3. ↑ Solomon, Brian (2003). Railroad Signaling. MBI Publishing. p. 55. ISBN 978-0-7603-1360-2.
  4. ↑ American Standard Brands, Piscataway, NJ. "1968: WABCO Joins Forces with American Standard." The History of American Standard. Accessed 2011-06-11.
  5. 1 2 McKay, Jim (1993-09-24). "Union Switch showing strength". Pittsburgh Post-Gazette. p. 10.
  6. ↑ "Ansaldo STS USA". Our Companies. Ansaldo STS. 2011-06-25. Archived from the original on 2012-03-21.
  7. ↑ "Photographs from the Union Switch & Signal Collection". Historic Pittsburgh. University of Pittsburgh. Retrieved 2016-06-13.
  8. ↑ Massey, Steve (1993-03-04). "Union Switch move sends a signal". Pittsburgh Post-Gazette. p. 14.
  9. ↑ Union Switch and Signal Co. (US&S) (1914). Electro-Pneumatic Interlocking. Swissvale, PA. pp. 9–11.
  10. ↑ US&S (1911). Automatic Block Signalling for Interurban Electric Railways. Swissvale, PA. p. 33. Bulletin No. 57.
  11. ↑ US&S (n.d.). Model 14 Electric Crossing Gate. Swissvale, PA. Bulletin No. 79.
  12. ↑ Collector's Guide to Colt .45 Service Pistols Models of 1911 and 1911A1 by Charles w. Clawson
Wikimedia Commons has media related to Union Switch & Signal.
This article is issued from Wikipedia - version of the 11/13/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.