Air-cooled engine

Air-cooled engines rely on the circulation of air directly over hot parts of the engine to cool them.

A cylinder from an air-cooled aviation engine, a Continental C85. Notice the rows of fins on both the steel cylinder barrel and the aluminum cylinder head. The fins provide additional surface area for air to pass over the cylinder and absorb heat.

Introduction

Most modern internal combustion engines are cooled by a closed circuit carrying liquid coolant through channels in the engine block and cylinder head, where the coolant absorbs heat, to a heat exchanger or radiator where the coolant releases heat into the air (or raw water, in the case of marine engines). Thus, while they are not ultimately cooled by the liquid, because of the liquid-coolant circuit they are known as water-cooled. In contrast, heat generated by an air-cooled engine is released directly into the air. (Direct Cooled Engine) Typically this is facilitated with metal fins covering the outside of the Cylinder Head and cylinders which increase the surface area that air can act on. Air may be force fed with the use of a fan and shroud to achieve efficient cooling with high volumes of air or simply by natural air flow with well designed and angled fins.

In all combustion engines, a great percentage of the heat generated (around 44%) escapes through the exhaust, not through either a liquid cooling system nor through the metal fins of an air-cooled engine (12%). About 8% of the heat energy finds its way into the oil, which although primarily meant for lubrication, also plays a role in heat dissipation via a cooler.

Applications

Road vehicles

Honda CB1100

Many motorcycles use air cooling for the sake of reducing weight and complexity. Few current production automobiles have air-cooled engines (such as Tatra 815), but historically it was common for many high-volume vehicles. Examples of past air-cooled road vehicles, in roughly chronological order, include:

Aviation

Most aviation piston engines are air-cooled. Air cooled engines are lighter than their major alternative - water cooled engines, because the lower weight of air cooled engines in aircraft design being a more important factor than the lower drag of water cooled engines. While water cooled engines were widely used from the early days of flight, air cooled engines were the dominant choice in aircraft. Following the Second World War, turbojets and jet turbine powered aircraft have come to dominate flight regimes where water cooled piston engines offered a drag advantage. Thus today, piston engines are mostly used in slower general aviation aircraft where low weight is an advantage. Therefore, most aero engines produced today are of the air cooled variety. Today, most of the engines currently (2005) manufactured by Lycoming and Continental and used by major manufacturers of light aircraft Cirrus, Cessna and so on.

Notable exceptions have included the Allison V-1710 and Rolls-Royce series of (most well known, the Merlin V-1650) liquid-cooled V12 engines which powered P-51 Mustangs, Avro Lancasters, Hawker Hurricanes and Spitfires.

Other engine manufactures using air-cooled engine technology are ULPower and Jabiru, more active in the Light-Sport Aircraft (LSA) and ultralight aircraft market. Rotax uses a combination of air-cooled cylinders and liquid-cooled cylinder heads.

Diesel engines

Some small diesel engines, e.g. those made by Deutz AG and Lister Petter are air-cooled. Probably the only big Euro 5 truck air-cooled engine (V8 320 kW power 2100 N·m torque one) is being produced by Tatra.

Stationary or portable engines

Stationary or portable engines were commercially introduced early in the 1900s. The first commercial production was by the New Way Motor Company of Lansing, Michigan, US. The company produced air-cooled engines in single and twin cylinders in both horizontal and vertical cylinder format. Subsequent to their initial production which was exported worldwide, other companies took up the advantages of this cooling method, especially in small portable engines. Applications include mowers, generators, outboard motors, pump sets, saw benches and auxiliary power plants.

References

  1. ↑ Sloan 1964, pp. 71–94, Chapter 5, "The copper-cooled engine".

Bibliography

Cited sources

Further reading

This article is issued from Wikipedia - version of the 11/23/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.