Honeycomb structure

For other uses, see Honeycomb (disambiguation).
A composite sandwich panel (A) with honeycomb core (C) and face sheets (B)
An image of aluminum honeycomb structure.
Honeycomb crash absorption structure made of injection moulded thermoplastic polymer on a BMW i3

Honeycomb structures are natural or man-made structures that have the geometry of a honeycomb to allow the minimization of the amount of used material to reach minimal weight and minimal material cost. The geometry of honeycomb structures can vary widely but the common feature of all such structures is an array of hollow cells formed between thin vertical walls. The cells are often columnar and hexagonal in shape. A honeycomb shaped structure provides a material with minimal density and relative high out-of-plane compression properties and out-of-plane shear properties.[1]

Man-made honeycomb structural materials are commonly made by layering a honeycomb material between two thin layers that provide strength in tension. This forms a plate-like assembly. Honeycomb materials are widely used where flat or slightly curved surfaces are needed and their high Specific strength is valuable. They are widely used in the aerospace industry for this reason, and honeycomb materials in aluminum, fibreglass and advanced composite materials have been featured in aircraft and rockets since the 1950s. They can also be found in many other fields, from packaging materials in the form of paper-based honeycomb cardboard, to sporting goods like skis and snowboards.

Introduction

Natural honeycomb structures include beehives, honeycomb weathering in rocks, tripe, and bone.

Man-made honeycomb structures include sandwich-structured composites with honeycomb cores. Man-made honeycomb structures are manufactured by using a variety of different materials, depending on the intended application and required characteristics, from paper or thermoplastics, used for low strength and stiffness for low load applications, to high strength and stiffness for high performance applications, from aluminum or fiber reinforced plastics. The strength of laminated or sandwich panels depends on the size of the panel, facing material used and the number or density of the honeycomb cells within it. Honeycomb composites are used widely in many industries, from aerospace industries, automotive and furniture to packaging and logistics. The material takes its name from its visual resemblance to a bee's honeycomb – a hexagonal sheet structure.

History

The hexagonal comb of the honey bee has been admired and wondered about from ancient times. The first man-made honeycomb is said to have been manufactured by Daedalus from gold by lost wax casting more than 3000 years ago.[2] Marcus Varro reports that the Greek geometricians Euclid and Zenodorus found that the hexagon shape makes most efficient use of space and building materials. The interior ribbing and hidden chambers in the dome of the Pantheon in Rome is an early example of a honeycomb structure.[3]

Galileo Galilei discusses in 1638 the resistance of hollow solids: "Art, and nature even more, makes use of these in thousands of operations in which robustness is increased without adding weight, as is seen in the bones of birds and in many stalks that are light and very resistant to bending and breaking”.[4] Robert Hook discovers in 1665 that the natural cellular structure of cork is similar to the hexagonal honeybee comb.[5] and Charles Darwin states in 1859 that "the comb of the hive-bee, as far as we can see, is absolutely perfect in economizing labour and wax”.[6]

The first paper honeycomb structures might have been made by the Chinese 2000 years ago for ornaments, but no reference for this has been found. Paper honeycombs and the expansion production process has been invented in Halle/Saale in Germany by Hans Heilbrun in 1901[7] for decorative applications. First honeycomb structures from corrugated metal sheets had been proposed for bee keeping in 1890.[8] For the same purpose, as foundation sheets to harvest more honey, a honeycomb moulding process using a paper paste glue mixture had been patented in 1878.[9] The three basic techniques for honeycomb production that are still used today—expansion, corrugation and moulding—were already developed by 1901 for non-sandwich applications.

Hugo Junkers first explored the idea of a honeycomb core within a laminate structure. He proposed and patented the first honeycomb cores for aircraft application in 1915.[10] He described in detail his concept to replace the fabric covered aircraft structures by metal sheets and reasoned that a metal sheet can also be loaded in compression if it is supported at very small intervals by arranging side by side a series of square or rectangular cells or triangular or hexagonal hollow bodies. The problem of bonding a continuous skin to cellular cores led Junkers later to the open corrugated structure, which could be riveted or welded together.

The first use of honeycomb structures for structural applications had been independently proposed for building application and published already in 1914.[11] In 1934 Edward G. Budd patented a welded steel honeycomb sandwich panel from corrugated metal sheets and Claude Dornier aimed 1937 to solve the core-skin bonding problem by rolling or pressing a skin which is in a plastic state into the core cell walls.[12] The first successful structural adhesive bonding of honeycomb sandwich structures was achieved by Norman de Bruyne of Aero Research Limited, who patented an adhesive with the right viscosity to form resin fillets on the honeycomb core in 1938.[13] The North American XB-70 Valkyrie made extensive use of stainless steel honeycomb panels using a brazing process they developed.

A summary of the important developments in the history of honeycomb technology is given below:[14]

Manufacture

The three traditional honeycomb production techniques, expansion, corrugation, and moulding, were all developed by 1901 for non-sandwich applications. For decorative applications the expanded honeycomb production reached a remarkable degree of automation in the first decade of the 20th century.

Today honeycomb cores are manufactured via the expansion process and the corrugation process from composite materials such as glass-reinforced plastic (also known as fiberglass), carbon fiber reinforced plastic, Nomex aramide paper reinforced plastic, or from a metal (usually aluminum).[15]

Honeycombs from metals (like aluminum) are today produced by the expansion process. Continuous processes of folding honeycombs from a single aluminum sheet after cutting slits had been developed already around 1920.[16] Continuous in-line production of metal honeycomb can be done from metal rolls by cutting and bending.[17]

Thermoplastic honeycomb cores (usually from polypropylene) are usually made by extrusion processed via a block of extruded profiles[18] or extruded tubes[19][20] from which the honeycomb sheets are sliced.

Recently a new, unique process to produce thermoplastic honeycombs has been implemented, allowing a continuous production of a honeycomb core as well as in-line production of honeycombs with direct lamination of skins into cost efficient sandwich panel.[21]

Today, a wide variety of materials can be formed into a honeycomb composite. For example paperboard honeycomb is used in paper pallets and package cushioning, blocking and bracing.[22]

Applications

Composite honeycomb structures have been used in numerous engineering and scientific applications.

Application area Industry Company/Product
Racing shells Sport Vespoli, Janousek Racing Boats
Aerospace manufacturing Aerospace Hexcel, Neomet Ltd.
Gliders Aerospace Schleicher ASW 19, Solar Impulse Project
Helicopters Aerospace Kamov Ka-25, Bell 533, Westland Lynx
Jet aircraft Aerospace General Dynamics/Grumman F-111B, F-111 Aardvark, all commercial airlines since the Boeing 747
Rocket substructure Aerospace Saturn V Instrument Unit, Mars Exploration Rover, S-520
LED technology Lighting SmartSlab
Loudspeaker technology Audio Loudspeaker#Driver design, Woofer
Telescope mirror structure Aerospace Hubble Space Telescope
Automobile structure Automotive Panther Solo, Dome F105, Bluebird-Proteus CN7, BMW i3 / i8, Koenigsegg Agera
Snowboards Sports Snowboard
Furniture; woodworking furniture
Repulpable Exhibition stands; Construction Repulpable Exhibition Stands

More recent developments show that honeycomb structures are also advantageous in applications involving nanohole arrays in anodized alumina,[23] microporous arrays in polymer thin films,[24] activated carbon honeycombs,[25] and photonic band gap honeycomb structures.[26]

Aerodynamics

Honeycomb grille used on a computer fan to reduce noise
Honeycombed, screened center for Langley's first wind tunnel

A honeycomb mesh is often used in aerodynamics to reduce or to create wind turbulence. It is also used to obtain a standard profile in a wind tunnel (temperature, flow speed). A major factor in choosing the right mesh is the length ratio (length vs honeycomb cell diameter) L/d.

Length ratio < 1: Honeycomb meshes of low length ratio can be used on vehicles front grille. Beside the aesthetic reasons, these meshes are used as screens to get a uniform profile and to reduce the intensity of turbulence.[27]

Length ratio >> 1: Honeycomb meshes of large length ratio reduce lateral turbulence and eddies of the flow. Early wind tunnels used them with no screens; unfortunately, this method introduced high turbulence intensity in the test section. Most modern tunnels use both honeycomb and screens.

While aluminium honeycombs are common use in the industry, other materials are offered for specific applications. People using metal structures should take care of removing burrs as they can introduce additional turbulences. Polycarbonate structures are a low-cost alternative.

The honeycombed, screened center of this open-circuit air intake for Langley's first wind tunnel ensured a steady, non-turbulent flow of air. Two mechanics pose near the entrance end of the actual tunnel, where air was pulled into the test section through a honeycomb arrangement to smooth the flow.

Honeycomb is not the only cross-section available in order to reduce eddies in an airflow. Square, rectangular, circular and hexagonal cross-sections are other choices available, although honeycomb is generally the preferred choice.[28]

Properties

In combination with two skins applied on the honeycomb, the structure offers a sandwich panel with excellent rigidity at minimal weight. The behavior of the honeycomb structures is orthotropic, meaning the panels react differently depending on the orientation of the structure. It is therefore necessary to distinguish between the directions of symmetry, the so-called L and W-direction. The L-direction is the strongest and the stiffest direction. The weakest direction is at 60° from the L-direction (in the case of a regular hexagon) and the most compliant direction is the W-direction.[1] Another important property of honeycomb sandwich core is its compression strength. Due to the efficient hexagonal configuration, where walls support each other, compression strength of honeycomb cores is typically higher (at same weight) compared to other sandwich core structures such as, for instance, foam cores or corrugated cores.

See also

References

  1. 1 2 Wahl, L.; Maas, S.; Waldmann, D.; Zurbes, A.; Freres, P. (28 May 2012). "Shear stresses in honeycomb sandwich plates: Analytical solution, finite element method and experimental verification". Journal of Sandwich Structures and Materials. 14 (4): 449–468. doi:10.1177/1099636212444655.
  2. Diodorus Siculus, Library of History, 1st century BC
  3. MacDonald 1976, p. 33 "There are openings in it [the rotunda] here and there, at various levels, that give on to some of the many different chambers that honeycomb the rotunda structure, a honeycombing that is an integral part of a sophisticated engineering solution..."
  4. Galilei, G., Discorsi e dimostrazioni matematiche, intorno á due nuoue scienze, Leiden, Elzeviers, 1638
  5. Hook, R., Micrographia, London, J. Martyn and J. Allestry, 1665
  6. Darwin, C., On the Origin of Species by Means of Natural Selection, London, John Murray, 1859
  7. Heilbrun & Pinner, Papiernetz, DE133165, 1901
  8. Julius Steigel, Verfahren zur Herstellung von Kunstwaben, DE57655, 1890
  9. Küstermann, F. H., Künstliche Bienenwaben nebst den Instrumenten zur Herstellung derselben, DE7031, 1879
  10. Hugo Junkers, Abdeckung für Flugzeugtragflächen und dergleichen, DE310040, 1915
  11. Höfler, R. and S. Renyi, Plattenförmiger Baukörper, DE355036, 1914
  12. Dornier, C. Improvements in or relating to a method for the fabrication of lightweight structural members more particularly for aircraft construction, GB515267, Dornier Metallbauten GmbH, 1937
  13. "Society for Adhesion and Adhesives". Uksaa-www.me.ic.ac.uk. 1904-11-08. Retrieved 2014-02-13.
  14. "EconHP Holding - History /index.php". Econhp.de. Retrieved 2014-02-13.
  15. Hexweb Attributes and Properties, accessed Sept 21, 2006
  16. , Dean, H. B. (1919). Artificial honeycomb. US1389294. USA, John D. Howe.
  17. "Lesjöfors develops tool for Ericsson invention". Lesjoforsab.com. Retrieved 2014-02-13.
  18. Nidaplast Corporation (2013-11-08). "Nidaplast Environment and Composites, creation of polypropylene honeycomb products". Nidaplast.com. Retrieved 2014-02-13.
  19. "Tubus-Waben". Tubus Waben. Retrieved 2014-02-13.
  20. "Honeycomb Cores – Honeycomb Panels Products". Plascore. Retrieved 2014-02-13.
  21. "EconCore NV". EconCore.com. Retrieved 2014-10-03.
  22. Bitzer, T (1997). Honeycomb Technology: Materials, Design, Manufacturing, Applications and Testing, London: Chapman & Hall.
  23. Masuda, H. and Fukuda, K., (1995), Ordered metal nanohole arrays made by a two-step replication of honeycomb structures of anodic alumina, Science, 268(5216), p. 1466.
  24. Yabu, H. and Takebayashi, M. and Tanaka, M. and Shimomura, M., 2005, Superhydrophobic and lipophobic properties of self-organized honeycomb and pincushion structures, Langmuir, 21(8), pp. 3235–3237.
  25. Gadkaree, KP, (1998), Carbon honeycomb structures for adsorption applications, Carbon, 36(7–8), pp. 981–989.
  26. Broeng, J. and Barkou, S.E. and Bjarklev, A. and Knight, J.C. and Birks, T.A. and Russell, P.S.J., (1998), Highly increased photonic band gaps in silica/air structures, Optics Communications, 156(4–6), pp. 240–244.
  27. Honeycomb in Wind tunnel design by Bradshaw, Peter & Mehta, Peter.
  28. "Components of a Wind Tunnel". Brighthub.com
This article is issued from Wikipedia - version of the 7/10/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.