Rhymney Railway R class

Rhymney Railway
R and R1 classes
Type and origin
Power type Steam
Designer C. T. Hurry Riches
Builder Robert Stephenson & Co. (5),
Hudswell, Clarke & Co. (4),
Beyer, Peacock & Co. (6)
Serial number RS:
HC: 1431/32/38/39
BP: 6099–6104
Build date 1907–1921
Total produced 15
Specifications
Configuration 0-6-2T
Gauge 4 ft 8 1⁄2 in (1,435 mm) standard gauge
Driver dia. 4 ft 6 in (1,372 mm)
Loco weight 62.5–66.95 long tons (70.00–74.98 short tons; 63.50–68.02 t)
Fuel type Coal
Boiler pressure 175 lbf/in2 (1.21 MPa);
Rebuilt: 200 lbf/in2 (1.38 MPa)
Cylinders Two, inside
Cylinder size 18.5 in × 26 in (470 mm × 660 mm)
Performance figures
Tractive effort 24,510 lbf (109.0 kN);
Rebuilt: 28,015 lbf (124.6 kN)
Career
Operators RR, GWR, BR
Class RR: R & R1
Power class BR: 4F
Numbers RR: 1–3, 17, 39–47, 62, 97
GWR/BR: 30–44, 46
Withdrawn 1949–1957

The Rhymney R class was a class of 0-6-2T steam locomotive introduced into traffic in 1907 designed by the railway's engineer Hurry Riches. These were substantial sized tank locomotives, and weighed 67 long tons (75 short tons; 68 t) (62 long tons or 69 short tons or 63 t after rebuilding) and were 37 feet (11.28 m) in length.

There were initially three locos in the class augmented to five in 1909. They were built by Robert Stephenson, though in 1921 Hudswell Clarke built four and Beyer, Peacock and Company contributed a further six.

Numbering
Year RR class RR Nos. Builder Builder Nos. GWR/BR Nos.
1907 R 1–3 Robert Stephenson & Co. 3288–3290 30–32
1909 R 17, 97 Robert Stephenson & Co. 3370–3371 34, 46
1921 R1 39–42 Hudswell Clarke 1431–1432, 1438–1439 35–38
1921 R1 43–47, 62 Beyer, Peacock & Co. 6099–6104 39–44

The R class and related 1904-introduced M and 1910 A classes were successful designs ideally suited to hauling heavy coal trains a relatively short distance. In 1926, No 17 was reboilered by the GWR and in this form was visually almost indistinguishable from the GWR 5600 Class.

Thus the R (and closely related "Stephenson" M class, A, A1 and larger wheeled P classes) were designed for work on the Rhymney Railway, replacing smaller locomotives. When the smaller railway companies were forcibly merged into the GWR, these modern 0-6-2's were in generally good order (some were a few months old) and had proved successful. Collectively they became the blueprint for the 200 strong 5600 class.

The design of the 5600 class followed the Rhymney designs quite closely but adopted GWR practice as far as possible, by utilising many standardized parts. Included in Collett’s innovations was a standard number 2 boiler which was suitable for the 5600 (and the M and R class Rhymney locomotives), complete with the traditional copper GWR safety valve casing and copper-capped chimney. Some A and P classes were also rebuilt but used the slightly shorter standard number 10 boiler, also to good effect.

Five R class locos were upgraded from 1926 onwards. All told sixteen "Stephenson" locos were similarly dealt with between 1926 and 1949.

Welsh 0-6-2T types

The railways of South Wales seem to have had a particular liking for the 0-6-2T type. This was because the nature of the work they undertook demanded high adhesive weight, plenty of power with good braking ability, but no need for outright speed, nor large tanks or bunker as the distances from pit to port were short. These Welsh locomotives were taken over by the GWR at the grouping in 1923 and many including seventeen of the Rhymney A, M, P and R's were rebuilt with GWR taper boilers. All the Rhymney Stevenson derived locos passed into British Railways (BR) ownership in 1948. Others included (with some gaps in numbering):

For further information on these pre-grouping locomotives see Locomotives of the Great Western Railway.

References

See also

This article is issued from Wikipedia - version of the 9/10/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.