Metric prefix

Metric prefixes in everyday use
Text Symbol Factor Power
exa E 1000000000000000000 1018
peta P 1000000000000000 1015
tera T 1000000000000 1012
giga G 1000000000 109
mega M 1000000 106
kilo k 1000 103
hecto h 100 102
deca da 10 101
(none) (none) 1 100
deci d 0.1 10−1
centi c 0.01 10−2
milli m 0.001 10−3
micro μ 0.000001 10−6
nano n 0.000000001 10−9
pico p 0.000000000001 10−12
femto f 0.000000000000001 10−15
atto a 0.000000000000000001 10−18

A metric prefix is a unit prefix that precedes a basic unit of measure to indicate a multiple or fraction of the unit. While all metric prefixes in common use today are decadic, historically there have been a number of binary metric prefixes as well.[1] Each prefix has a unique symbol that is prepended to the unit symbol. The prefix kilo-, for example, may be added to gram to indicate multiplication by one thousand: one kilogram is equal to one thousand grams. The prefix milli-, likewise, may be added to metre to indicate division by one thousand; one millimetre is equal to one thousandth of a metre.

Decimal multiplicative prefixes have been a feature of all forms of the metric system with six dating back to the system's introduction in the 1790s. Metric prefixes have even been prepended to non-metric units. The SI prefixes are standardized for use in the International System of Units (SI) by the International Bureau of Weights and Measures (BIPM) in resolutions dating from 1960 to 1991.[2] Since 2009, they have formed part of the International System of Quantities.

List of SI prefixes

The BIPM specifies twenty prefixes for the International System of Units (SI).

Prefix 1000m 10n Decimal English word Adoption[nb 1]
Name Symbol Short scale Long scale
yotta Y  10008  1024 1000000000000000000000000  septillion  quadrillion 1991
zetta Z  10007  1021 1000000000000000000000  sextillion  thousand trillion or trilliard 1991
exa E  10006  1018 1000000000000000000  quintillion  trillion 1975
peta P  10005  1015 1000000000000000  quadrillion  thousand billion or billiard 1975
tera T  10004  1012 1000000000000  trillion  billion 1960
giga G  10003  109 1000000000  billion  thousand million or milliard 1960
mega M  10002  106 1000000             million 1960 (1873)
kilo k  10001  103 1000             thousand 1960 (1795)
hecto h  10002/3  102 100             hundred 1960 (1795)
deca da  10001/3  101 10             ten 1960 (1795)
 10000  100 1             one –
deci d  1000−1/3  10−1 0.1             tenth 1960 (1795)
centi c  1000−2/3   10−2 0.01             hundredth 1960 (1795)
milli m  1000−1  10−3 0.001             thousandth 1960 (1795)
micro μ  1000−2  10−6 0.000001             millionth 1960 (1873)
nano n  1000−3  10−9 0.000000001  billionth  thousand millionth 1960
pico p  1000−4  10−12 0.000000000001  trillionth  billionth 1960
femto f  1000−5  10−15 0.000000000000001  quadrillionth  thousand billionth 1964
atto a  1000−6  10−18 0.000000000000000001  quintillionth  trillionth 1964
zepto z  1000−7  10−21 0.000000000000000000001  sextillionth  thousand trillionth 1991
yocto y  1000−8  10−24  0.000000000000000000000001  septillionth  quadrillionth  1991
  1. ↑ The metric system was introduced in 1795 with several metric prefixes, of which, however, only six were adopted as SI prefixes by the 11th CGPM conference in 1960, whereas myria (104) as well as double and demi were not adopted. In 1873, micro and mega were recommended by the British Association for the Advancement of Science. The other dates relate to recognition by a resolution of the CGPM.

Each prefix name has a symbol which is used in combination with the symbols for units of measure. For example, the symbol for kilo- is 'k', and is used to produce 'km', 'kg', and 'kW', which are the SI symbols for kilometre, kilogram, and kilowatt, respectively.

Prefixes may not be used in combination. This also applies to mass, for which the SI base unit (kilogram) already contains a prefix. For example, milligram (mg) is used instead of microkilogram (µkg).

In arithmetic of measurements having prefixed units, the prefixes must be expanded to their numeric multiplier, except when adding or subtracting values with identical units. Hence, 5 mV × 5 mA = 5×10−3 V × 5×10−3 A = 25×10−6 W = 25 µW.

Prefixes corresponding to an integer power of one thousand are generally preferred. Hence 100 m is preferred over 1 hm (hectometre) or 10 dam (decametres). The prefixes hecto, deca, deci, and centi were commonly used for everyday purposes, especially the centimetre (cm) is common. However, some modern building codes require that the millimetre be used in preference to the centimetre, because "use of centimetres leads to extensive usage of decimal points and confusion".[3]

When units occur in exponentiation, for example, in square and cubic forms, the multiplication prefix must be considered part of the unit, and thus included in the exponentiation.

Examples

Application to units of measurement

The use of prefixes can be traced back to the introduction of the metric system in the 1790s, long before the 1960 introduction of the SI. The prefixes, including those introduced after 1960, are used with any metric unit, whether officially included in the SI or not (e.g., millidynes and milligauss). Metric prefixes may also be used with non-metric units.

The choice of prefixes with a given unit is usually dictated by convenience of use. Unit prefixes for amounts that are much larger or smaller than those actually encountered are seldom used.

Metric units

Mass

In use, the kilogram, gram, milligram, microgram, and smaller are fairly common. However, megagram (and gigagram, teragram, etc.) are rarely used; tonnes (and kilotonnes, megatonnes, etc – although these units generally are not used as a measure of mass per se, but rather TNT energy equivalent of a mass) or scientific notation are used instead. Megagram is occasionally used to disambiguate the metric tonne from the various non-metric tons. An exception is pollution emission rates, which are typically on the order of Tg/yr. Sometimes only one element or compound is denoted for an emission, such as Tg C/yr or Tg N/yr.

Alone among SI units, the base unit of mass, the kilogram, already includes a prefix. The prefixes consequently do not indicate corresponding multipliers of the base unit in the case of mass; for example, a megagram is 1×103 kg, whereas mega- indicates a multiplier of 106.

Volume

The litre (equal to a cubic decimetre), millilitre (equal to a cubic centimetre), microlitre, and smaller are common. In Europe, the centilitre is often used for packaged products (such as wine) and the decilitre less frequently. (The latter two items include prefixes corresponding to an exponent that is not divisible by three.)

Larger volumes are usually denoted in kilolitres, megalitres or gigalitres, or else in cubic metres (1 cubic metre = 1 kilolitre) or cubic kilometres (1 cubic kilometre = 1 teralitre). For scientific purposes the cubic metre is usually used.

Length

The kilometre, metre, centimetre, millimetre, and smaller are common. (However, the decimetre is rarely used.) The micrometre is often referred to by the non-SI term micron. In some fields such as chemistry, the ångström (equal to 0.1 nm) historically competed with the nanometre. The femtometre, used mainly in particle physics, is usually called a fermi. For large scales, megametre, gigametre, and larger are rarely used. Instead, non-metric units are used, such as astronomical units, light years, and parsecs; the astronomical unit is mentioned in the SI standards as an accepted non-SI unit.

Time and angles

The second, millisecond, microsecond, and shorter are common. The kilosecond and megasecond also have some use, though for these and longer times one usually uses either scientific notation or minutes, hours, and so on.

Official policies about the use of these prefixes vary slightly between the Bureau International des Poids et Mesures (BIPM) and the American National Institute of Standards and Technology (NIST); and some of the policies of both bodies are at variance with everyday practice. For instance, the NIST advises that "to avoid confusion, prefix symbols (and prefixes) are not used with the time-related unit symbols (names) min (minute), h (hour), d (day); nor with the angle-related symbols (names) ° (degree), ′ (minute), and ″ (second)." [4]

The BIPM’s position on the use of SI prefixes with units of time larger than the second is the same as that of the NIST but their position with regard to angles differs: they state "However astronomers use milliarcsecond, which they denote mas, and microarcsecond, µas, which they use as units for measuring very small angles."[5] The SI unit of angle is the radian, but, as mentioned above, degrees, minutes and seconds see some scientific use.

Temperature

Official policy also varies from common practice for the degree Celsius (°C). NIST states: "Prefix symbols may be used with the unit symbol °C and prefixes may be used with the unit name 'degree Celsius'. For example, 12 m°C (12 millidegrees Celsius) is acceptable." In practice, it is more common for prefixes to be used with the kelvin when it is desirable to denote extremely large or small absolute temperatures or temperature differences. Thus, temperatures of star interiors may be given in units of MK (megakelvins), and molecular cooling may be described in mK (millikelvins).

Energy

There exist a number of definitions for the non-SI unit, the calorie. There are gram calories and kilogram calories. One kilogram calorie, which equals one thousand gram calories, often appears capitalized and without a prefix (i.e. 'Cal') when referring to "dietary calories" in food. It is common to apply metric prefixes to the gram calorie but not to the kilogram calorie: thus, for example, 1 kcal = 1000 cal = 1 Cal.

Non-metric units

Metric prefixes are widely used outside the system of metric units. Common examples include the megabyte and the decibel. Metric prefixes rarely appear with imperial or US units except in some special cases (e.g., microinch, kilofoot, kilopound or 'kip'). They are also used with other specialized units used in particular fields (e.g., megaelectronvolt, gigaparsec, millibarn). They are also occasionally used with currency units (e.g., gigadollar), mainly by people who are familiar with the prefixes from scientific usage. In geology and paleontology, the year, with symbol a (from the Latin annus), is commonly used with metric prefixes: ka, Ma, and Ga.

Presentation

Pronunciation

The prefix giga is usually pronounced in English as /ˈɡɪɡə/, but sometimes /ˈdʒɪɡə/. According to the American writer Kevin Self, in the 1920s a German committee member of the International Electrotechnical Commission proposed giga as a prefix for 109, drawing on a verse (evidently "Anto-logie") by the German humorous poet Christian Morgenstern that appeared in the third (1908) edition of his Galgenlieder (Gallows Songs).[6][7] This suggests that a hard German g was originally intended as the pronunciation. Self was unable to ascertain when the /dʒ/ (soft g) pronunciation was accepted, but as of 1995 current practice had returned to /ɡ/ (hard g).[8][9]

When an SI prefix is affixed to a root word, the prefix carries the stress, while the root drops its stress but retains a full vowel in the syllable that is stressed when the root word stands alone. For example, gigabyte is /ˈɡɪɡəbaɪt/, with stress on the first syllable. However, words in common use outside the scientific community may follow idiosyncratic stress rules. In English speaking countries kilometre is often pronounced /kᵻˈlɒmᵻtər/, with reduced vowels on both syllables of metre.

Typesetting

The LaTeX typesetting system features an SIunitx package, in which the units of measurement are spelled out, for example, \SI{3}{\tera\hertz} formats as "3 THz".

Non-standard prefixes

Distance marker on the Rhine: 36 (XXXVI) myriametres from Basel. The stated distance is 360 km; the decimal mark in Germany is a comma.

Obsolete metric prefixes

Some of the prefixes formerly used in the metric system have fallen into disuse and were not adopted into the SI.[10][11][12] The decimal prefix myria- (sometimes also written as myrio-) (ten thousand) as well as the binary prefixes double- and demi-, denoting a factor of 2 and 1/2 (one half), respectively, were parts of the original metric system adopted by France in 1795.[1] These were not retained when the SI prefixes were internationally adopted by the 11th CGPM conference in 1960.

Double prefixes

Double prefixes have been used in the past, such as micromillimetres or "millimicrons" (now nanometres), micromicrofarads (now picofarads), kilomegatons (now gigatons), hectokilometres (now 100 kilometres) and the derived adjective hectokilometric (typically used for qualifying the fuel consumption measures).[13] These were disallowed with the introduction of the SI.

Other obsolete double prefixes included "decimilli-" (10−4), which was contracted to "dimi-"[14] and standardized in France up to 1961.

"Hella" prefix proposal

In 2010, UC Davis student Austin Sendek started a petition to designate "hella" as the SI prefix for one octillion (1027).[15] The petition gathered over 60,000 supporters by circulating through Facebook and receiving a significant amount of media coverage.[16] Although the Consultative Committee for Units considered the proposal, it was ultimately rejected. However, hella has been adopted by certain websites, such as Google Calculator[17] and Wolfram Alpha.[18]

X, W and V

Brian C. Lacki[19] follows Z and Y with the adopted prefixes X, W and V to mean 1027, 1030 and 1033 respectively, thus continuing the inverse alphabetical order.

Similar symbols and abbreviations

In written English, the symbol K is often used informally to indicate a multiple of thousand in many contexts. For example, one may talk of a 40K salary (40000), or call the Year 2000 problem the Y2K problem. In these cases an uppercase K is often used (although it should not, the uppercase K being the symbol for Kelvin). This informal postfix is read or spoken as "thousand" or "grand", or just "k", but never "kilo" (despite that being the origin of the letter).

The financial and general news media mostly use m/M, b/B and t/T as abbreviations for million, billion (109) and trillion (1012) for large quantities, typically currency[20] and population.[21]

The medical and automotive fields in the United States use the abbreviations "cc" or "ccm" for cubic centimetres. 1 cubic centimetre is equivalent to 1 millilitre.

For nearly a century, the electrical construction industry used the abbreviation "MCM" to designate a "thousand circular mils" in specifying thicknesses of large electrical cables. Since the mid-1990s, "kcmil" has been adopted as the "official" designation of a thousand circular mils, but the designation "MCM" still remains in wide use. A similar system is used in natural gas sales in the United States: m (or M) for thousands and mm (or MM) for millions of British thermal units or therms, and in the oil industry,[22] where 'MMbbl' is the symbol for 'millions of barrels'. This usage of the capital letter M for 'thousand' is from Roman numerals, in which M means 1,000. [23]

Binary prefixes

In some fields of information technology it has been common to designate non-decimal multiples based on powers of 1024, rather than 1000, for some SI prefixes (kilo, mega, giga), contrary to the definitions in the International System of Units (SI). This practice has been sanctioned by some industry associations, including JEDEC. The International Electrotechnical Commission (IEC) standardized the system of binary prefixes (kibi, mebi, gibi, etc.) for this purpose.[24][Note 1]

See also

Notes

  1. ↑ The names and symbols of the binary prefixes proposed by the IEC include
    • kibi (Ki) = 210 = 1024
    • mebi (Mi) = 220 = 10242 = 1048576
    • gibi (Gi) = 230 = 10243 = 1073741824
    etc.

References

This article is based on material taken from the Free On-line Dictionary of Computing prior to 1 November 2008 and incorporated under the "relicensing" terms of the GFDL, version 1.3 or later.

  1. 1 2 "La Loi Du 18 Germinal An 3 - Décision de tracer le mètre, unité fondamentale, sur une règle de platine. Nomenclature des "mesures républicaines". Reprise de la triangulation." (in French). histoire.du.metre.free.fr. Retrieved 12 October 2015.
  2. ↑ "Four Resolutions". Bipm.org. Retrieved 1 March 2012.
  3. ↑ https://web.archive.org/web/20111215115519/http://wbdg.org/ccb/GSAMAN/mdg.pdf
  4. ↑ http://physics.nist.gov/Pubs/SP811/sec06.html
  5. ↑ "BIPM - SI prefixes". Bipm.fr. Retrieved 1 March 2012.
  6. ↑ Morgenstern, Christian (1917). Galgenlieder nebst dem 'Gingganz' (in German). Illustrated by Karl Walser (22 ed.). Berlin, Germany: Bruno Cassirer. p. 52 – via Project Gutenberg. [First four lines:] Im Anfang lebte, wie bekannt, / als größter Säuger der Gig-ant. / Wobei gig eine Zahl ist, die / es nicht mehr gibt, - so groß war sie! [These lines are the only appearance of "gig" in the book. "Gigant" is German for "giant"; cf. "gigantic".]
  7. ↑ Morgenstern, Christian (1963). Gallows Songs: Christian Morgenstern's "Galgenlieder", Bilingual Edition: A Selection. Translated by Knight, Max. University of California Press. pp. 24–25. ISBN 9780520008847. Retrieved 20 February 2016. [Translation:] Of yore, on earth was dominant / the biggest mammal: the Gig-ant. / ("Gig" is a numeral so vast, / it's been extinct for ages past.)
  8. ↑ Self, Kevin (October 1994). "Technically speaking". Spectrum. IEEE: 18.
  9. ↑ Self, Kevin (April 1995). "Technically speaking". Spectrum. IEEE: 16.
  10. ↑ 29th Congress of the United States, Session 1 (13 May 1866). "H.R. 596, An Act to authorize the use of the metric system of weights and measures".
  11. ↑ Brewster, David (1830). The Edinburgh Encyclopædia. 12. Edinburgh, UK: William Blackwood, John Waugh, John Murray, Baldwin & Cradock, J. M. Richardson. p. 494. Retrieved 9 October 2015.
  12. ↑ Brewster, David (1832). The Edinburgh Encyclopaedia. 12 (1st American ed.). Joseph and Edward Parker. Retrieved 9 October 2015.
  13. ↑ Rowlett, Russ (2008) [2000]. "millimicro-". How Many? A Dictionary of Units of Measurement. University of North Carolina at Chapel Hill. Archived from the original on 29 August 2016. Retrieved 29 August 2016.
  14. ↑ Danloux-Dumesnils, Maurice (1969). The metric system: a critical study of its principles and practice. The Athlone Press. p. 34. Retrieved 9 October 2015. (a translation of the French original Esprit et bon usage du systeme metrique, 1965)
  15. ↑ Chawkins, Steve (6 July 2010). "Physics major has a name for a really big number". Los Angeles Times.
  16. ↑ "The Official Petition to Establish "Hella" as the SI Prefix for 10^27".
  17. ↑ Kim, Ryan. "Google gets behind "hella" campaign". SFGate.
  18. ↑ Sendek, Austin. "First goes Google, now goes Wolfram Alpha".
  19. ↑ Lacki, B. C. (2015). SETI at Planck Energy: When Particle Physicists Become Cosmic Engineers. arXiv preprint arXiv:1503.01509 .
  20. ↑ The Associated Press (13 February 2012). "Obama unveils $3.8T budget proposal". Cbc.ca. Retrieved 1 March 2012.
  21. ↑ "More than 65M Flock to Discovery's Planet Earth". Multichannel.com. Retrieved 1 March 2012.
  22. ↑ "Purcell, P (2007). ''Disambiguating M''. PESA News 88". Pesa.com.au. Retrieved 1 March 2012.
  23. ↑ "What is the difference between MCM and kcmil?". Reference.com. Retrieved 5 September 2016.
  24. ↑ International Electrotechnical Commission (January 2010). "IEC 60050 - International Electrotechnical Vocabulary - Details for IEV number 112-01-27". Retrieved 19 June 2011.

External links

This article is issued from Wikipedia - version of the 11/30/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.