S-GPS
Simultaneous GPS or S-GPS is a method to enhance a mobile phone's satellite-based position reporting ability to a mobile network operator.
Ordinarily, a built-in, multi- dimensional GPS device is used to determine the location of an E911 call made from CDMA phones. By using a time-multiplexed scheme called TM-GPS, the reception of the telephone call and the GPS signal are alternated one after the other, requiring only one RF radio.
As the name implies, Simultaneous GPS allows a cellphone to receive both GPS and voice data at the same time, which improves sensitivity and allows service providers to offer location-based services.[1] The use of two radios with a single antenna imparts new design challenges, such as leakage of the voice transmitter signal into the GPS receiver circuitry.[2] The commercial availability of S-GPS chipsets, however, from manufacturers such as Qualcomm, has led to adoption of the method in newer handsets[3] and Samsung's latest processors (as the ones used in Galaxy S III, Note 10.1, Note 2[4]).
References
- ↑ Milette, Greg; Stroud, Adam. Professional Android Sensor Programming. John Wiley & Sons. p. 6. ISBN 9781118240458.
- ↑ Xu, Y.; Wang, K.; Pals, T.; Hadjichristos, A.; Sahota, K.; Persico, C. (1 September 2007). "A Low-IF CMOS Simultaneous GPS Receiver Integrated in a Multimode Transceiver". 2007 IEEE Custom Integrated Circuits Conference: 107–110. doi:10.1109/CICC.2007.4405692. Retrieved 18 June 2016.
- ↑ "Improving S-GPS sensitivity". Avago Technologies.
- ↑ Samsung Galaxy Note 10.1