Microsoft Speech API

This article is about the Speech API. For other uses, see SAPI (disambiguation).

The Speech Application Programming Interface or SAPI is an API developed by Microsoft to allow the use of speech recognition and speech synthesis within Windows applications. To date, a number of versions of the API have been released, which have shipped either as part of a Speech SDK, or as part of the Windows OS itself. Applications that use SAPI include Microsoft Office, Microsoft Agent and Microsoft Speech Server.

In general all versions of the API have been designed such that a software developer can write an application to perform speech recognition and synthesis by using a standard set of interfaces, accessible from a variety of programming languages. In addition, it is possible for a 3rd-party company to produce their own Speech Recognition and Text-To-Speech engines or adapt existing engines to work with SAPI. In principle, as long as these engines conform to the defined interfaces they can be used instead of the Microsoft-supplied engines.

In general the Speech API is a freely redistributable component which can be shipped with any Windows application that wishes to use speech technology. Many versions (although not all) of the speech recognition and synthesis engines are also freely redistributable.

There have been two main 'families' of the Microsoft Speech API. SAPI versions 1 through 4 are all similar to each other, with extra features in each newer version. SAPI 5 however was a completely new interface, released in 2000. Since then several sub-versions of this API have been released.

Basic architecture

The Speech API can be viewed as an interface or piece of middleware which sits between applications and speech engines (recognition and synthesis). In SAPI versions 1 to 4, applications could directly communicate with engines. The API included an abstract interface definition which applications and engines conformed to. Applications could also use simplified higher-level objects rather than directly call methods on the engines.

In SAPI 5 however, applications and engines do not directly communicate with each other. Instead, each talks to a runtime component (sapi.dll). There is an API implemented by this component which applications use, and another set of interfaces for engines.

Typically in SAPI 5 applications issue calls through the API (for example to load a recognition grammar; start recognition; or provide text to be synthesized). The sapi.dll runtime component interprets these commands and processes them, where necessary calling on the engine through the engine interfaces (for example, the loading of a grammar from a file is done in the runtime, but then the grammar data is passed to the recognition engine to actually use in recognition). The recognition and synthesis engines also generate events while processing (for example, to indicate an utterance has been recognized or to indicate word boundaries in the synthesized speech). These pass in the reverse direction, from the engines, through the runtime dll, and on to an event sink in the application.

In addition to the actual API definition and runtime dll, other components are shipped with all versions of SAPI to make a complete Speech Software Development Kit. The following components are among those included in most versions of the Speech SDK:

Versions

Xuedong Huang was a key person who led Microsoft's early SAPI efforts.

SAPI 1-4 API family

SAPI 1

The first version of SAPI was released in 1995, and was supported on Windows 95 and Windows NT 3.51. This version included low-level Direct Speech Recognition and Direct Text To Speech APIs which applications could use to directly control engines, as well as simplified 'higher-level' Voice Command and Voice Talk APIs.

SAPI 3

SAPI 3.0 was released in 1997. It added limited support for dictation speech recognition (discrete speech, not continuous), and additional sample applications and audio sources.

SAPI 4

SAPI 4.0 was released in 1998. This version of SAPI included both the core COM API; together with C++ wrapper classes to make programming from C++ easier; and ActiveX controls to allow drag-and-drop Visual Basic development. This was shipped as part of an SDK that included recognition and synthesis engines. It also shipped (with synthesis engines only) in Windows 2000.

The main components of the SAPI 4 API (which were all available in C++, COM, and ActiveX flavors) were:

SAPI 5 API family

The Speech SDK version 5.0, incorporating the SAPI 5.0 runtime was released in 2000. This was a complete redesign from previous versions and neither engines nor applications which used older versions of SAPI could use the new version without considerable modification.

The design of the new API included the concept of strictly separating the application and engine so all calls were routed through the runtime sapi.dll. This change was intended to make the API more 'engine-independent', preventing applications from inadvertently depending on features of a specific engine. In addition this change was aimed at making it much easier to incorporate speech technology into an application by moving some management and initialization code into the runtime.

The new API was initially a pure COM API and could be used easily only from C/C++. Support for VB and scripting languages were added later. Operating systems from Windows 98 and NT 4.0 upwards were supported.

Major features of the API include:

SAPI 5.0

This version shipped in late 2000 as part of the Speech SDK version 5.0, together with version 5.0 recognition and synthesis engines. The recognition engines supported continuous dictation and command & control and were released in U.S. English, Japanese and Simplified Chinese versions. In the U.S. English system, special acoustic models were available for children's speech and telephony speech. The synthesis engine was available in English and Chinese. This version of the API and recognition engines also shipped in Microsoft Office XP in 2001.

SAPI 5.1

This version shipped in late 2001 as part of the Speech SDK version 5.1. Automation-compliant interfaces were added to the API to allow use from Visual Basic, scripting languages such as JScript, and managed code. This version of the API and TTS engines was shipped in Windows XP. Windows XP Tablet PC Edition and Office 2003 also include this version, but with a substantially improved version 6 recognition engine and Traditional Chinese.

SAPI 5.2

This was a special version of the API for use only in the Microsoft Speech Server which shipped in 2004. It added support for SRGS and SSML mark-up languages, as well as additional server features and performance improvements. The Speech Server also shipped with the version 6 desktop recognition engine and the version 7 server recognition engine.

SAPI 5.3

This is the version of the API that ships in Windows Vista together with new recognition and synthesis engines. As Windows Speech Recognition is now integrated into the operating system, the Speech SDK and APIs are a part of the Windows SDK. SAPI 5.3 includes the following new features:

SAPI 5.4

This is an updated version of the API that ships in Windows 7.

SAPI 5 Voices

Microsoft Sam (Speech Articulation Module) is a commonly shipped SAPI 5 voice. In addition, Microsoft Office XP and Office 2003 installed L&H Michael and Michelle voices. The SAPI 5.1 SDK installs 2 more voices, Mike and Mary. Windows Vista includes Microsoft Anna which replaces Microsoft Sam and sounds more natural and intelligible. It is also installed on Windows XP by Microsoft Streets & Trips 2006 and later versions. The Chinese version of Vista and later Windows client versions also include a female voice named Microsoft Lili.

Managed code Speech API

A managed code API ships as part of the .NET Framework 3.0.[1] It has similar functionality to SAPI 5 but is more suitable to be used by managed code applications. The new API is available on Windows XP, Windows Server 2003, Windows Vista, and Windows Server 2008.

The existing SAPI 5 API can also be used from managed code to a limited extent by creating COM Interop code (helper code designed to assist in accessing COM interfaces and classes). This works well in some scenarios however the new API should provide a more seamless experience equivalent to using any other managed code library.

However, major obstacle towards transitioning from the COM Interop is the fact that the managed implementation has subtle memory leaks which lead to memory fragmentation and exclude the use of the library in any non-trivial applications. As a workaround, Microsoft has suggested using a different API, which has fewer voices.[2]

Speech functionality in Windows Vista

Windows Vista includes a number of new speech-related features including:

Microsoft Agent most notably, and all other Microsoft speech applications use SAPI 5.

Compatibility

The Speech API is compatible with the following operating systems:[3]

SAPI 5

SAPI 4

Major applications using SAPI

See also

External links

References

  1. ↑ Michael Dunn. "Speech synthesis and recognition in .NET - Give applications a voice". Redmond Developer News. Retrieved 2011-11-09.
  2. ↑ System.Speech has a memory leak | Microsoft Connect. Connect.microsoft.com. Retrieved on 2013-09-27.
  3. ↑ Microsoft Corporation. "SAPI System Requirements". MSDN. Retrieved 2006-04-12.


This article is issued from Wikipedia - version of the 9/7/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.