Advanced Telescope for High Energy Astrophysics
Mission type | Space observatory |
---|---|
Operator | European Space Agency |
Website | http://www.the-athena-x-ray-observatory.eu/ |
Mission duration | 5 years |
Spacecraft properties | |
Launch mass | 5,525 kg (12,181 lb) |
BOL mass | 5,353 kg (11,801 lb) |
Dry mass | 5,038 kg (11,107 lb) |
Power | 5.556 kilowatts (5,556 W) |
Start of mission | |
Launch date | 2028 |
Rocket | Ariane 6[1] |
Orbital parameters | |
Reference system | L2 point |
Main | |
Type | X-ray telescope |
Focal length | 12m |
Instruments | |
X-ray Integral Field Unit, Wide Field Imager |
The Advanced Telescope for High ENergy Astrophysics (ATHENA) is a planned X-ray telescope of the European Space Agency. It is the second (L2) large class mission within ESA Cosmic Vision Program.[2][3] ATHENA will be one hundred times more sensitive than the best of existing X-ray telescopes—Chandra X-ray Observatory, and XMM-Newton.[4]
The primary goals of the mission are to map hot gas structures, determining their physical properties, and searching for supermassive black holes.
History and development
Previously, the telescope was a candidate for the first (L1) L-class Cosmic Vision mission, but lost to the Jupiter Icy Moon Explorer. ATHENA came about from an ESA reboot of the International X-ray Observatory project planned by ESA, JAXA and NASA from about 2008 to 2011. A changing set of conditions lead to changes, in part because a NASA withdrawal from IXO.[5] IXO had itself resulted from a 2008 proposal merger, including ESA's XEUS. The mission was selected as a second large mission of the Cosmic Vision programme.[6]
The final decision about rebooting the International X-ray Observatory took place on the 27 of June 2014.[6] The selected science topic is "Hot and Energetic Universe" with an objective of answering to questions from astrophysics: How does ordinary matter assemble into the large-scale structures we see today? And how do black holes grow and shape the universe?
The science team was appointed on 16 July 2014.[7] Initial vibration testing of a silicon pore optics mirror module took place in August 2014.[8] ESA's Science Programme Committee will meet in 2019 for a full review and final approval of the project before construction to begin in the same year.[4][9]
Orbit
An Ariane 6 launch vehicle will lift ATHENA in 2028 into a large amplitude Halo orbit around L2 point of the Sun-Earth system through a direct transfer burn. L2 was selected due to its stable thermal environment, good sky visibility and high observing efficiency. ATHENA is planned to perform scheduled observations of up to 300 celestial locations per year, with these observations lasting from half an hour up to over 11 days, though can be repointed to observe transient events.[10]
Optics and instruments
ATHENA will utilize a telescope with 12m focal length, and two primary instruments: high resolution X-ray Integral Field Unit (X-IFU), and the Wide Field Imager (WFI) featuring a moderate resolution and a large field of view.[10]
The telescope will use ESA-developed silicon pore optics providing combination of large field of view and high angular resolution. Each pore is a Wolter Type-I telescope only few mm2 in cross-section, with two reflections inside of each pore bringing X-ray in focus. In total, 1.5 million pores will be used. The telescope will be manufactured in 60 mm-wide arrays using commercially available silicon wafers.[10]
- X-ray Integral Field Unit
X-IFU utilizes an array of cryogenically cooled transition edge sensors with a detection range of 0.2-12 keV. Total field of view is 5 arcminutes.[11][12]
- Wide Field Imager
The Wide Field Imager (WFI) is an X-ray spectrometer utilizing five arrays of p-channel field-effect transistors with a detection range of 0.1-15 keV. Its central chip has a resolution of 256 × 256 px and a field of view 7.5 arcminutes. Its four outer arrays have a resolution of 448 × 640 px and a field of view 40 arcminutes.[13][14]:1,9
References
- ↑ Watson, Mike. "Athena Mission Update" (PDF). Retrieved 2015-12-22.
- ↑ "ESA's new vision to study the invisible universe". ESA. Retrieved 29 November 2013.
- ↑ Jonathan Amos (2 May 2012). "ESA selects 1bn-euro Juice probe to Jupiter". BBC News Online. BBC. Retrieved 13 May 2012.
- 1 2 Jonathan Amos (27 June 2014). "Athena: Europe plans huge X-ray space telescope". BBC News Online. BBC. Retrieved 22 October 2014.
- ↑ "About ATHENA". ESA. 2 April 2012. Retrieved 19 October 2014.
- 1 2 "ESA Science & Technology: Athena to study the hot and energetic Universe". ESA. 27 June 2014. Retrieved 23 August 2014.
- ↑ "ESA appointed Science Study Team". ATHENA website. 16 July 2014. Retrieved 19 October 2014.
- ↑ "Vibration testing of silicon pore optics module". ESA. 19 August 2014. Retrieved 19 October 2014.
- ↑ Jacob Aron (30 June 2014). "Biggest X-ray eye in space to hunt hot cosmic objects". New Scientist. Retrieved 22 October 2014.
- 1 2 3 "ESA Science & Technology: ATHENA". ESA. 19 August 2014. Retrieved 19 October 2014.
- ↑ "The X-ray Integral Field Unit (X-IFU)". ATHENA website. Retrieved 19 October 2014.
- ↑ "The X-ray Integral Field Unit (X-IFU) for Athena" (PDF).
- ↑ "The Wide Field Imager (WFI)". ATHENA website. Retrieved 19 October 2014.
- ↑ A. Rau (19 October 2014). "The Wide Field Imager (WFI) for Athena+" (DOCX). Retrieved 19 October 2014.
External links
- The ATHENA X-ray observatory - official website (alternative link)
- ATHENA resources - 1st ATHENA conference, September 2015.
- ATHENA on ESA Cosmic Vision website
- ATHENA on ESA Cosmos website
- ATHENA video on YouTube
- Image of silicone pore optics mirror