List of Arduino boards and compatible systems

This is a non-exhaustive list of Arduino boards and compatible systems. It lists boards in these categories:

• Released under the official Arduino name
• Arduino "shield" compatible
• Development-environment compatible
• Based on non-Atmel processors

Where different from the Arduino base feature set, compatibility, features, and licensing details are included.

Official Arduino boards

Many versions of the official Arduino hardware have been commercially produced to date:^[1][2]

Name	Processor		Format		Host interface						I/O			Release date	Notes
	Processor	Frequency		Dimensions			Voltage	Flash (kB)	EEPROM (kB)	SRAM (kB)	Digital I/O (pins)	Digital I/O with PWM (pins)	Analog input (pins)
Arduino 101[3] Genuino 101	Intel® Curie™ module[4] two tiny cores, an x86 (Quark SE) and an ARC	32 MHz	Arduino / Genuino	68.6 mm × 53.4 mm [ 2.7 in × 2.1 in ]	USB		3.3 V	196		24	14	4	6	October 16, 2015	Contains six-axis accelerometer, gyroscope and bluetooth
Arduino Zero[5]	ATSAMD21G18A[6]	48 MHz	Arduino	2.7 in × 2.1 in [ 68.6 mm × 53.3 mm ]	USB	Native & EDBG Debug	3.3 V	256	0 to 16 Kb emulation	32	14	12	6	Released June 15, 2015[7] Announced May 15, 2014[8] Listed on some vendors list Mar 2015	Beta testing since Aug 1, 2014[9]
Arduino Due[10][11]	ATSAM3X8E[12] (Cortex-M3)	84 MHz	Mega	4 in × 2.1 in [ 101.6 mm × 53.3 mm ]	USB	16U2[13] + native host[14]	3.3 V	512	0[15]	96	54	12	12	October 22, 2012[16]	The first Arduino board based on an ARM Processor. Features 2 channel 12-bit DAC, 84 MHz clock frequency, 32-bit architecture, 512 KB Flash and 96 KB SRAM. Unlike most Arduino boards, it operates on 3.3 V and is not 5 V tolerant.
Arduino Yún[17]	Atmega32U4,[18] Atheros AR9331	16 MHz, 400 MHz	Arduino	2.7 in × 2.1 in [ 68.6 mm × 53.3 mm ]	USB		5 V	32 kB, 16 MB	1 kB, 0 kB	2.5 kB, 64 MB	14	6	12	September 10, 2013[19]	Arduino Yún is the combination of a classic Arduino Leonardo (based on the Atmega32U4 processor) with a Wifi system on a chip (SoC) running Linino, a MIPS GNU/Linux based on OpenWrt.
Arduino Leonardo[20][21]	Atmega32U4[18]	16 MHz	Arduino	2.7 in × 2.1 in [ 68.6 mm × 53.3 mm ]	USB	32U4[18]	5 V	32	1	2.5	20	7	12	July 23, 2012[22]	The Leonardo uses the Atmega32U4 processor, which has a USB controller built-in, eliminating one chip as compared to previous Arduinos.
Arduino Uno[23][24]	ATmega328P[25]	16 MHz	Arduino	2.7 in × 2.1 in [ 68.6 mm × 53.3 mm ]	USB	8U2[26] (Rev1&2)/ 16U2[13] (Rev3)	5 V	32	1	2	14	6	6	September 24, 2010[27]	This uses the same ATmega328 as late-model Duemilanove, but whereas the Duemilanove used an FTDI chip for USB, the Uno uses an ATmega16U2 (ATmega8U2 before rev3) programmed as a serial converter.
Arduino Mega2560[28][29]	ATmega2560[30]	16 MHz	Mega	4 in × 2.1 in [ 101.6 mm × 53.3 mm ]	USB	8U2[26] (Rev1&2)/ 16U2[13] (Rev3)	5 V	256	4	8	54	15	16	September 24, 2010[27]	Total memory of 256 kB. Uses the ATmega16U2 (ATmega8U2 before Rev3) USB chip. Most shields that were designed for the Duemilanove, Diecimila, or Uno will fit, but a few shields will not fit because of interference with the extra pins.
Arduino Ethernet[31]	ATmega328[32]	16 MHz	Arduino	2.7 in × 2.1 in [ 68.6 mm × 53.3 mm ]	Ethernet Serial interface	Wiznet Ethernet	5 V	32	1	2	14	4	6	July 13, 2011[33]	Based on the same WIZnet W5100 chip as the Arduino Ethernet Shield.[34] A serial interface is provided for programming, but no USB interface. Late versions of this board support Power over Ethernet (PoE).
Arduino Fio[35]	ATmega328P[25]	8 MHz	minimal	2.6 in × 1.1 in [ 66.0 mm × 27.9 mm ]	XBee Serial		3.3 V	32	1	2	14	6	8	March 18, 2010[36]	Includes XBee socket on bottom of board.[37]
Arduino Nano[38]	ATmega328[32] (ATmega168 before v3.0[39])	16 MHz	minimal	1.70 in × 0.73 in [ 43.18 mm × 18.54 mm ]	USB	FTDI FT232R[40]	5 V	16/32	0.5/1	1/2	14	6	8	May 15, 2008[41]	This small USB-powered version of the Arduino uses a surface-mounted processor.
LilyPad Arduino[42]	ATmega168V or ATmega328V	8 MHz	wearable	2 in ⌀51 mm ⌀			2.7-5.5 V	16	0.5	1	14	6	6	October 17, 2007[43]	This minimalist design is for wearable applications.
Arduino Pro [44]	ATmega168 or ATmega328[44]	16 MHz	Arduino	2.05 in × 2.1 in [ 52.1 mm × 53.3 mm ]	UART Serial, I2C(TWI), SPI	FTDI	5 V or 3.3 V	16/32	0.5/1	1/2	14	6	6		Designed and manufactured by SparkFun Electronics for use in semi-permanent installations.
Arduino Mega ADK[45]	ATmega2560[30]	16 MHz	Mega	4 in × 2.1 in [ 101.6 mm × 53.3 mm ]		8U2[26] MAX3421E USB Host	5 V	256	4	8	54	14	16	July 13, 2011[33]
Arduino Esplora[46]	Atmega32U4[18]	16 MHz		6.5 in × 2.4 in [ 165.1 mm × 61.0 mm ]		32U4[18]	5 V	32	1	2.5				December 10, 2012	Analog joystick, four buttons, several sensors, 2 TinkerKit inputs and 2 outputs, LCD connector
Arduino Micro[47]	ATmega32U4[18]	16 MHz	Mini	0.7 in × 1.9 in [ 17.8 mm × 48.3 mm ]			5 V	32	1	2.5	20	7	12	November 8, 2012[48]	This Arduino was co-designed by Adafruit.
Arduino Pro Mini	ATmega328	8 (3.3 V)/16 (5 V) MHz	Mini	0.7 in × 1.3 in [ 17.8 mm × 33.0 mm ]	Six pin serial header		3.3 V / 5 V	32	1	2	14	6	6		Designed and manufactured by SparkFun Electronics.

See also list of Official Arduino Boards in wikidata

Superseded boards

The following have been superseded by later and more capable versions from Arduino, but some, particularly the Duemilanove, are still in widespread use.

Name	Processor		Format		Host interface						I/O			Release date	Notes
	Processor	Frequency		Dimensions			Voltage	Flash (kB)	EEPROM (kB)	SRAM (kB)	Digital I/O (pins)	Digital I/O with PWM (pins)	Analog input (pins)
Serial Arduino[49]	ATmega8[50]	16 MHz	Arduino	3.2 in × 2.1 in [ 81.3 mm × 53.3 mm ]	DE-9 serial connection	native									The first board labelled "Arduino".
Arduino USB[1]	ATmega8[50]	16 MHz	Arduino	3.2 in × 2.1 in [ 81.3 mm × 53.3 mm ]	USB	FTDI FT232BM									Changed: USB replaces RS-232 interface, Improved: Arduino can be powered from host
Arduino Extreme[1]	ATmega8[50]	16 MHz	Arduino	3.2 in × 2.1 in [ 81.3 mm × 53.3 mm ]	USB										The Arduino Extreme uses many more surface mount components than previous USB Arduino boards and comes with female pin headers.[1]
Arduino NG (Nuova Generazione)[1]	ATmega8[50]	16 MHz	Arduino	3.2 in × 2.1 in [ 81.3 mm × 53.3 mm ]	USB	FTDI FT232RL									Improved: FT232BM has been replaced by FT232RL to require fewer external components, LED on pin 13 added
Arduino NG plus	ATmega168[39]	16 MHz	Arduino	3.2 in × 2.1 in [ 81.3 mm × 53.3 mm ]	USB
Arduino BT (Bluetooth)[51][52]	ATmega168[39] ATmega328[32]	16 MHz	Arduino	3.2 in × 2.1 in [ 81.3 mm × 53.3 mm ]	Bluetooth	Bluegiga WT11 Bluetooth	5 V	32	1	2	14	4	6	October 22, 2007[53]	Similar to the Arduino NG, this has a Bluetooth module rather than a serial interface.[51] Programming is carried out via Bluetooth.
Arduino Diecimila[54]	ATmega168 (DIP-28)[39]	16 MHz	Arduino	2.7 in × 2.1 in [ 68.6 mm × 53.3 mm ]	USB	FTDI	5 V	16	0.5	1	14	6	6	October 22, 2007[53]	Improved: Host is able to reset the Arduino, pin headers for reset and 3.3 V, low dropout voltage regulator allows lower voltage on external power source
Arduino Duemilanove (2009)[55][56]	ATmega168,[39] ATmega328P (ATmega328 for newer version)	16 MHz	Arduino	2.7 in × 2.1 in [ 68.6 mm × 53.3 mm ]	USB	FTDI	5 V	16/32	0.5/1	1/2	14	6	6	October 19, 2008[57]	Improved: automatically switching between USB and external power, eliminating jumper
Arduino Mega[58][59]	ATmega1280[60]	16 MHz	Mega	4 in × 2.1 in [ 101.6 mm × 53.3 mm ]	USB	FTDI	5 V	128	4	8	54	14	16	March 26, 2009[61]	Uses a surface-mounted ATmega1280 for additional I/O and memory.[62]
Arduino Mini[63]	ATmega168[39] (Pro uses ATMega328)	8 MHz (3.3 V model) or 16 MHz (5 V model)		0.7 in × 1.3 in [ 17.8 mm × 33.0 mm ]			5	16	0.5	1	14	6	6	August 23, 2008[64]	This miniature version of the Arduino uses a surface-mounted processor.

Arduino-compatible boards

Although the hardware and software designs are freely available under copyleft licenses, the developers have requested that the name "Arduino" be exclusive to the official product and not be used for derivative works without permission. The official policy document on the use of the Arduino name emphasizes that the project is open to incorporating work by others into the official product.^[2]

As a result of the protected naming conventions of the Arduino, a group of Arduino users forked the Arduino Diecimila, releasing an equivalent board called Freeduino. The name "Freeduino" is not trademarked and is free to use for any purpose.^[65]

Several Arduino-compatible products commercially released have avoided the "Arduino" name by using "-duino" name variants.^[65]

Arduino footprint-compatible boards

The following boards are fully or almost fully compatible with both the Arduino hardware and software, including being able to accept "shield" daughterboards.

Name	Processor	Maker	Notes
GSTduino	ATmega328	Green System Technology[66]	Added features: Powered via the micro USB connection, or 2.8V – 5.5V battery connector Serial communication on pin D0 (RX) and pin D1 (TX). used to receive (RX) and transmit (TX) TTL serial data. These pins are connected to the corresponding pins of the FTDI USB-to-TTL Serial chip. By sliding the switch (S1), RX/TX pins can be re-routed to Bluetooth UART connector.
Linduino One	ATmega328	Linear Technology Corporation[67]	Compatible with Arduino Uno. Galvanically isolated USB interface provided by onboard LTM2884 USB Isolation module.
InVentor UNO[68]	ATmega328P-PU	Ventor Technologies[69]	Added Features: Single sided with SMD and TH components 5 V and 3.3 V LDO onboard USB to serial PL2303 instead of Atmega16U2 16 MHz Crystal Oscillator Shield compatible Auto Power source selection circuit
InvIoT U1	ATmega328P-PU	InvIoT.com[70]	inviot U1 (arduino-compatible) all-in-one board with LCD, rotary encoder, RTC DS3231, EEPROM, buzzer, push buttons, RGB Led, NRF24 plug, and ESP8266 plug. More Added Features: ATmega328P-PU with UNO bootloader LCD 20x4 2004 Rotary encoder 2x push buttons, RGB Led, power led Buzzer RTC clock DS3231 EEPROM NRF24 Plug ESP8266 Plug SD card Size 140mm x 65mm
Bluno	ATmega328	DFRobot.com	Added Features: Built in TI CC2540 Bluetooth 4.0 Ready
AVR.duino U+	ATmega328	SlicMicro.com	Compatible With Arduino Uno Rev3 Added Features: SlicBus Port (Serial + Power) Crystal Oscillator (Real Time Accuracy) On board test with Button/LED/Trimmer A6 and A7 available
SainSmart UNO[71]	ATmega328	SainSmart[72]	Compatible With Arduino
SainSmart Mega 2560[73]	ATmega2560[30]	SainSmart[72]	Compatible with Arduino
Freaduino MEGA2560[74]	ATmega2560[30]	ElecFreaks[75]	Arduino Mega compatible 3.3 or 5 V selectable More efficient switching power supply with 7-23 V input Mini-USB connector Can source 2 A at 5 V and 800 mA at 3.3 V
SainSmart UNO R3[76]	ATmega328-AU	SainSmart[72]	Development board compatible with Arduino UNO R3 Controller: SMD MEGA328P-AU; A6/A7 port added; 3.3 V/5 V supply voltage and I/O voltage switch.
AVR-Duino[77]		TavIR[78]	Another Arduino/Mega compatible board.
Brasuíno[79]		Holoscópio[80]	Based on the Uno with rearranged LEDs and reset button, mini-USB connector, and altered pin 13 circuitry so that the LED and resistor do not interfere with pin function when acting as an input. The Brasuíno was designed using KiCad, and is licensed as GPLv2.
ChibiDuino2[81]	ATmega328	TiisaiDipJp[81]	Japanese Arduino compatible kit using Uno board setting. Includes two mini-B USB sockets, 1602 LCD socket, 5 V or 3.3 V power selection, breadboard area.
Cosmo Black Star[82]	ATmega328	JT5[83]	Arduino layout-compatible board. Based on the Arduino Duemilanove.
CraftDuino[84]		Manufactured and sold by RoboCraft Team.
CT UNO	ATmega328P	Cytron Technologies	CT-UNO Features: Arduino Uno compatible. SMD ATmega328 microcontroller with Optiboot (UNO) Bootloader. USB Programming Facilitated by the Ubiquitous FTDI FT231X (more stable). TX, RX, Power, pin 13 LEDs are moved to edge. Utilize USB Micro-B socket. Extra pads with standard 0.1” (2.54 mm) pitch to pitch.
CT ARM (Cytron ARM Cortex M0)	NUC131LD2AE (32-bit ARM Cortex-M0)	Cytron Technologies	CT-ARM Features: Microcontroller: NUC131LD2AE (32-bit ARM Cortex-M0) Operating voltage: 5 VDC Flash size (program memory): 64 KB SRAM size: 8 KB Digital I/O: 20 (16 PWM) Analog input (ADC): 6 UART: 5 + 1 Clock Speed: 50 MHz Compatible with Arduino IDE.
Diavolino[85]		Evil Mad Scientist Laboratories	Arduino layout-compatible board, designed for use with a USB-TTL serial cable.
DuinoBot v1.x[86]	ATmega32U4	RobotGroup Argentina[87]	Arduino fully compatible board, with integrated power supply and controllers designed for robotics. Compatible as well with the system "Multiplo"
eJackino[88]		Kit by CQ publisher in Japan.	Similar to Seeeduino, eJackino can use Universal boards as Shields. On back side, there is a "Akihabara station" silk, just like Italia on Arduino.
gizDuino Version 5.0V	Atmega168, Atmega328	e-gizmo	Arduino Comptible usb to serial made by prolific locally made in the philippines.
Elektor Platino[89] universal AVR board	ATmega8, ATmega16, ATmega32, ATmega88, ATmega164, ATmega168, ATmega324, ATmega328, ATmega644, ATmega1284	Elektor	Platino is an Arduino compatible board that supports 28-pin and 40-pin AVR devices. The board features multiple footprints for user interface elements like LCDs, pushbuttons, rotary encoders, LEDs and buzzer, supported by an extensive library. Bootloaders are available for all supported processors. On its backside are Arduino shield compatible connectors plus other extension connectors.
fayaduino Series[90]	fayalab[91]	Manufactured and sold by Taiwan-based kit company fayalab, with 100% compatible design to Genuino/Arduino.
Freeduino MaxSerial[90]		Manufactured and sold assembled or as a kit by Fundamental Logic until May 2010.	A board with a standard DE-9 serial port.
Freeduino SB[92]	ATmega328	Solarbotics Ltd.[93]	Compatible with the Duemilanove.
Freeduino Through-Hole[94]		Manufactured and sold as a kit by NKC Electronics.	The design avoids surface-mount soldering.
Illuminato Genesis[95]	ATmega644		Provides 64 kB of flash, 4 kB of RAM and 42 general I/O pins. Hardware and firmware are open source.
InduinoX[96]	ATmega168/ATmega 328/ATmega 8	Simple Labs[97]	A low cost Arduino clone using the ATmega168/ATmega 328/ATmega 8 and designed for prototyping, it includes onboard peripherals such as an RGB LED, switches, IR Tx/Rx and DS1307 real-time clock(RTC).
Japanino[98]	ATmega168[39]	A kit by Otonano Kagaku publisher in Japan.	The board and a POV kit were included in Vol. 27 of the eponymous series. It is unique in having a regular size USB A connector.
1000Pads Luigino[99]			Minimalistic version of Arduino: small, without serial converter. Available as a kit, board only or assembled. Smaller than Arduino, with different footprint.
Luigino328[100]	ATmega328		It has an improved automatic voltage selector, resolves problems during programming caused by shields that use the serial port, with an automatic serial port selector, and has the LM1117 voltage regulator.
metaboard[101]		Developed by Metalab, a hackerspace in Vienna.	Designed to have a very low complexity and price. Hardware and firmware are open source.
Rascal	AT91SAM9G20 (ARM9)	Rascal Micro[102]	It is compatible with Arduino shields, but it is programmed in Python rather than C++. It has an embedded webserver.
Raspduino[103]	ATmega328	Bitwizard[104]	Fully Arduino compatible board, that fits perfectly on a Raspberry Pi, and can be programmed through the Raspberry Pi's serial interface. It also breaks out the Raspberry Pi's SPI and I²C interfaces, or can be used as a stand-alone Arduino when powered with the external power header.
Romeo 2012[105]	ATmega328	DFRobot[106]	An all-in-one Arduino with motor controller. Compatible with the Arduino Uno.
Roboduino[107]			Designed for robotics. All connections have neighboring power buses (not pictured) for servos and sensors. Additional headers for power and serial communication are provided. It was developed by Curious Inventor, LLC.
Seeeduino[108]	v2.21 (Atmega168 or Atmega328) v3.0 (Atmega328)	SeeedStudio	Derived from the Diecimila. This photo is v1.0b.
SunDuino[109]	ATmega8/88/168/328/16/32/324/644 and PIC18F2550/4550 PIC32MX320F128 and ButterFLY, STM32Discovery	Lothar Team Arduino PRO Compatible boards. (Poland)	Another Arduino compatible board, software- and hardware-compatible.
Iduino	Iduino nano mini 168/328 LilyPad Iduino Mega R3 Iduino UNO Iduino YUN	Geeetech	100% compatible with Arduino boards
TwentyTen[110]		Freetronics[111]	Based on the Duemilanove, with a prototyping area, rearranged LEDs, mini-USB connector, and altered pin 13 circuitry so LED and resistor do not interfere with pin function when acting as an input.
UDOO	Atmel SAM3X8E	SECO Inc.	Android-Linux-Arduino compatible board.
Volksduino[112]		Applied Platonics[113]	A low cost, high power, shield-compatible, complete Arduino-compatible board kit. Based on the Duemilanove, it comes with a 5 V / 1 A voltage regulator (optional 3.3 V regulator). Designed for low component count and for ease of assembly.
Wiseduino[114]			Includes a DS1307 RTC with backup battery, a 24LC256 EEPROM and a connector for XBee adapter for wireless communication.
Xaduino	ATXmega128A3U	OBDIIworld[115]	8/16 bit Xmega core @ 32 MHz. 8 KB SRAM. 37 Digital I/O. 3.3 V. 2 DAC. Output 3.3 V pin: 500 mA, 5 V 500 mA.
YourDuinoRoboRED	Atmel 328	Yourduino.com[116]	Includes 14 color-coded 3-pin connectors for direct cable connection of servos, electronic bricks, etc., and 6 color-coded3-pin connectors to Analog inputs for electronic bricks, etc. Provides improved 3.3 V regulator supplying 500 mA, and optional 3.3 V operation. Switching regulator provides 5 V 2 A from up to 20 V external supply.
YourDuinoRobo1[117]	Atmel 328	Yourduino.com[116]	Includes 6 color-coded 3-pin connectors for direct cable connection of servos, electronic bricks, etc., and 6 3-pin connectors to Analog inputs for electronic bricks, etc. Provides improved 3.3 V regulator supplying 500 mA, and optional 3.3 V operation.
ZArdino[118]	ATMega328	A kit created by Peter Ing	A South African Arduino-compatible board derived from the Duemilanove, it features mostly through-hole construction except for the SMD FT232RL IC, power selection switches, option for a Phoenix power connector instead of DC jack, extra I/O pads for using Veroboard as shields. Designed for easy assembly in countries where exotic components are hard to find. PCB layout and Board now available on Circuitmaker as Open Source Hardware
Zigduino[119]	ATmega128RFA1	Logos Electromechanical[120]	Integrates ZigBee (IEEE 802.15.4). It can be used with other 802.15.4 network standards as well as ZigBee. It is the same shape as the Duemilanove, includes an external RPSMA jack on the side of the board opposite the power jack, and is compatible with shields that work with other 3.3 V boards.
EtherTen[121]	ATmega328P	Freetronics	Fixed SPI behaviour on Ethernet chip, D13 pin isolated with a MOSFET of which can also be used as an input.
EtherMega[122]	ATmega2560[30]	Freetronics	Fixed SPI behaviour on Ethernet chip, Micro SD card slot, D13 pin isolated with a MOSFET of which can also be used as an input.
USBDroid[123]	ATmega328P	Freetronics	Can act as a host for an Android device and is compatible with the Android Open Accessory Development Kit, Micro SD card slot, D13 pin isolated with a MOSFET of which can also be used as an input.
Eleven[124]	ATmega328P	Freetronics	Arduino Uno compatible, D13 pin isolated with a MOSFET of which can also be used as an input.
KitTen[125]	ATmega328P	Freetronics	Includes both 3.3 V and 5 V regulators for shields, D13 pin isolated with a MOSFET of which can also be used as an input. Can be connect to Arduino using CAT5 cable.[126]
EtherDue[127]	ATSAM3X8E [12] (Cortex-M3)	Freetronics	Arduino Due with onboard Ethernet, software-compatible with Arduino Ethernet Shield, D13 pin isolated with a MOSFET of which can also be used as an input.
TAIJIUINO Due Pro [128]	ATSAM3X8E [12] (Cortex-M3)	Elechouse	Mostly compatible with Arduino Due. Includes RMII signals via a connector to allow access to the microcontroller's native Ethernet MAC.

Special purpose Arduino-compatible boards

Special purpose Arduino-compatible boards add additional hardware optimised for a specific application. It is kind of like having an Arduino and a shield on a single board. Some are Shield compatible, others are not.

Name	Processor	Shield-compatible?	Host interface	Maker	Additions
Io:duino[129]	AT90CAN128	yes	USB with FTDI serial chip	Railstars	Adds built-in CAN support through the AT90CAN128 micro processor, dual RJ45 jacks, and optional bus termination. Designed specifically for model railroading applications using the OpenLCB networking protocol, the hardware is sufficiently generic for use with other low-speed CAN networks. OUT OF BUSINESS 17 Dec 2014. All designs supposedly on GitHub, but Io:duino is not present. (http://railstars.com/blog/)
DFRobotShop Rover[130]	ATmega328				The is a minimalist tracked platform based on the Arduino Duemilanove. Has an ATmega328 with Arduino bootloader, a dual H-bridge and additional prototyping space and headers. It is compatible with many shields, though four digital pins are used when operating the motor controller. Has an onboard voltage regulator, additional LEDs, a temperature sensor, and a light sensor. Part of the DFRobotShop Rover kit.
Faraduino[131]	ATmega328	Yes	USB with FTDI serial chip	Developed by Middlesex University Teaching Resources.[132]	Simple shield-compatible board, with onboard discrete transistor H-bridges and screw terminals to drive two small DC motors from pins 4-7.[133] Has headers for three servos on pins 9-11. Also sold with the Faraduino buggy kit[134] and Faraconnect shield[135] as a simple school-level teaching robot.
Motoruino[136]	ATmega328	Yes	Serial only, 6 pin header	Guibot	Has L293D twin H-bridge.
ArduPilot[137]					An Arduino-compatible board designed for auto-piloting and autonomous navigation of aircraft, cars, and boats. It uses GPS for navigation and thermopile sensors or an IMU for stabilization.
ArduIMU[137]					An Arduino-compatible board designed for Inertial Measurement and Inertial Navigation navigation of aircraft, cars, and boats. It uses the ATMEGA128RFA1 and a variety of sensors IMU for various applications.
FlyDuino Mega[138]	ATmega 2560[30]		Serial only, 6 pin header	Paul Bake	An Arduino Mega 2560 compatible board designed for auto-piloting and autonomous navigation of multirotor aircraft. Designed to be stacked with sensor bobs and boards with several breakout boards available.
Colibri[139]	ATmega168[39]	No	Serial only	JT5[83]	Universal Platform for Wireless Data Transmission in the Frequency Band 868 MHz. The Board Combines Features Arduino Mini and the Radio EZRadioPRO for Receiving and Transmitting Data. With dataFlash.
JeeNode[140]	ATmega328		6 pin header	Jeelabs	Includes a wireless radio module, called the RFM12B by HopeRF
ArduPhone[141]	ATmega1284P	yes	USB	Freetronics	Cellular phone kit, ADH8066 GSM module, Micro SD slot, 16 key matrix keyboard, LiPo charger and microphone/speaker connectors.
WTFDUINO[142]	ATmega328p	No	USB & CH340G	Calum Knott	"The world needs a more confusing Arduino"
Tah[143]	ATmega32u4	Yes	USB	Revealing Hour Creations[144]	Stock Arduino Leonardo With a built-in BLE(Bluetooth Low Energy) 4.0. Has arduino compatibility with its breakout shield .
WIOT	ATmega32u4	No	USB	ubld.it	WIOT is an Open Source, rechargeable, Li-Ion battery powered, Arduino compatible, development board designed around the ATmega32U4 Processor and ESP8266 Wi-Fi Module.
XLR8	Altera MAX10 10M08 FPGA	Yes, with exceptions	USB	Alorium Technology	FPGA-based drop-in replacement for Arduino UNO R3; offers faster clock rates and overall applications speed, higher-performance through vendor-supplied hardware-specific library functions utilizing FPGA; half of FPGA's space remains available for further customizations including ones written by end user

Industrial grade boards

Name	Model	Processor	Voltage	Host interface	I/O	Maker	Additions
Controllino[145]	Mini	ATmega328	12V or 24V	USB	8x Analog/Digital Inputs, 6x Relays Outputs, 8x Digital Outputs	Controllino	A successful Kickstarter project
	Maxi	ATmega2560		Ethernet/USB	12x Analog/Digital Inputs, 10x Relays Outputs, 12x Digital Outputs
	Mega				12x Analog/Digital Inputs, 10x Relays Outputs, 12x Digital Outputs
FA-DUINO[146]	12RA	Mega2560	24V	RS232	8x Inputs, 4x Relays	Comfile Technology
	24RA				16x Inputs, 8x Relays
ARDBOX[147]		Atmega32U4	12-24V	USB	10x Input, 10x Output	Industrial Shields	Uses Arduino LEONARDO Board
Industruino[148]		Atmega 32u4 or Atmega AT90USB1286	6.5-32V	USB	8x shared digital Input/Output, 4x Analog input, 2 Analog output	Industruino	Arduino compatible industrial controller housed in DIN rail casing, designed for industrial automation in small to medium-sized businesses.
Iono[149]		No integral board	11-30V	USB / 6 pin header	6x Input, 6x Output	Sfera Labs	iono is a general-purpose industrial controller based on Arduino, suitable for professional use (e.g. industrial automation, building automation). It features wide-range power supply, analog/digital inputs with robust protection circuits, power relays with double-winding latching bistable coils, 0÷10V analog output, DIN rail case.

Software-compatibility only

These boards are compatible with the Arduino software, but they do not accept standard shields. They have different connectors for power and I/O, such as a series of pins on the underside of the board for use with breadboards for prototyping, or more specific connectors. One of the important choices made by Arduino-compatible board designers is whether or not to include USB circuitry in the board. That circuitry can be placed in the cable between development PC and board, thus making each instance of the board less expensive. For many Arduino tasks, the USB circuitry is redundant once the device has been programmed.

Name	Processor	Maker	Notes
Ardweeny[150]		Solarbotics	An inexpensive, even more compact breadboardable device.
Banguino[151]	ATmega328	Dimitech	Enhanced Arduino-Uno-compatible in standard PLCC68 socket
SAM15x15	SAMD21G18	avdweb	Mini SAMD21 development board 15x15mm (Arduino compatible) Digital I/O pins: 34 PWM outputs: 24 Analog inputs: 14
Bare Bones Board[152] (BBB) and Really Bare Bones Board[153] (RBBB)		Modern Device	Compact inexpensive Arduino-compatible board suitable for breadboarding.
BBFUINO (Breadboard Friendly Arduino Compatible)	ATmega328P	Cytron Technologies	BBFuino come with the ATMega328 controller, loaded with Optiboot (Arduino UNO's bootloader), compatible with Arduino IDE and sample code, design to fit breadboard for prototyping and learning, lower down the cost by taking out the USB to UART IC, so the board has the basic component to operate.
BlockDuino[154]	ATmega8 ATmega328	Blockduino	An Arduino-Diecimila-compatible board with serial connection to Blocks (shields).[155]
Boarduino[156]	ATmega168 or ATmega328	Adafruit	An inexpensive Arduino-Diecimila-compatible board made for breadboarding.
Breaduino[157]		Applied Platonics[113]	A complete, very low cost Arduino-compatible kit that can be assembled entirely on a breadboard.
Croduino series[158]	ATmega328	e-radionica.com	Inexpensive series of fully compatible Arduino board for education, hobbyist and automatisation, specially in Croatia.
Cardboarduino[159]	ATmega168[39]		Inspired by the Paperduino, an ultra low-cost Arduino compatible, built on printed posterboard, rather than a PCB.
Crumbuino-Nano[160]	ATmega328	chip45.com/[161]	The Crumbuino-Nano is a low-cost module comparable to the Arduino-Nano and can be used as Arduino-Nano in the Arduino-IDE. The Arduino bootloader is preloaded, hence the module is ready-to-use. The documentation shows the pin mapping of Arduino-naming to module pinout.
Crumbuino-Mega[162]	ATmega2560[30]	chip45.com/[161]	The Crumbuino-Mega is a low-cost module comparable to the Arduino-Mega 2560 and can be used as Arduino-Mega 2560 in the Arduino-IDE. The Arduino bootloader is preloaded, hence the module is ready-to-use. The documentation shows the pin mapping of Arduino-naming to module pinout.
Cuteduino	ATtiny85	Cytron Technologies	Cuteduino Features: ATtiny85 on board, 8 KB of flash, 512 byte of SRAM, 512 bytes of EEPROM. Internal oscillator runs at 16 MHz. USB bootloader so you can program it with the modified version Arduino IDE (from DigiSpark). Micro-B USB jack for power and/or USB uploading. 5 GPIO - 2 shared with the USB interface. The 3 independent I/O pins have 1 analog input (ADC) and 2 PWM output as well. Hardware I2C / SPI capability for breakout & sensor interfacing. Works with many basic Arduino libraries including RainbowBit library.
Digispark[163]	ATTiny85	Digistump[164]	Built-in USB plug. Requires special version of the Arduino IDE.
DragonFly[165]	ATmega1280[60]		A compact board with Molex connectors, aimed at environments where vibration could be an issue. DragonFly features the ATmega1280 and have all 86 I/O lines pinned out to connectors.
Femtoduino[166]	ATmega328P-MU	Femtoduino[167]	Femtoduino PCB vs Dime An ultra-small (20.7x15.2 mm) Arduino compatible board designed by Fabio Varesano. Femtoduino is currently the smallest Arduino compatible board available.
Freeduino USB Mega 2560[168]	ATmega2560[30]	Bhasha Technologies[169]	Freeduino USB Mega 2560, designed in India with Male headers (coming soon with Female Headers). Suitable for use in project, R&D, device and applications Freeduino USB Mega 2560 is a cost effective and 100% pin and software compatible to the popular Arduino Mega 2560. Uses through hole components and has male headers.
Freeduino Lite v2[170]	ATmega8/168/328	Bhasha Technologies[169]	Freeduino Lite v2 is a low cost, Freeduino with no USB and Serial port. Needs FTDI USB Cable or FTDI Breakout board for programming. Uses through hole components and has male headers.
Freeduino Serial[171]	ATmega8/168/328	Bhasha Technologies[169]	Freeduino Serial is a low cost Freeduino board with serial DB9 connector. Uses MAX232 Chip for Serial connectivty.
Freeduino NANO[167]	ATmega328	Bhasha Technologies[169]	Freeduino nano designed in India, completely breadboard friendly, elegant and compact design. Freeduino Nano is a low cost Arduino Nano compatible board with mini USB connector using SMD components Freeduino Nano.
iDuino[166]			A USB board for breadboarding, manufactured and sold as a kit by Fundamental Logic.
IMUduino[172]	ATMega32u4	Femtoduino.com[173]	The world's first wireless 3D position, inertia, and orientation beacon. Designed in the San Francisco bay area, this board provides a 10-DoF IMU with on-board ATMega32u4 chip (the same as the Arduino Leonardo).
JeeNode[174]	ATmega328P	JeeLabs[175]	Low-cost, low-size, radio-enabled Arduino-compatible board running at 3.3 V. Inspired by the Modern Device RBBB (above) with a HopeRF RFM12B wireless module and a modular I/O design supporting a wide range of interfaces.[176]
LCDuino[177]	ATmega328P	Geppetto Electronics	A combination of an ATMega328P and an i2c based RGB backlit LCD interface (software compatible with the Adafruit RGB LCD shield), along with a USB serial programming interface done as a "backpack" module for the LCD.
LEDuino[178]			A board with enhanced I²C, DCC decoder and CAN-bus interfaces. Manufactured using surface mount and sold assembled by Siliconrailway.
Moteino[179]	ATmega328P	LowPowerLab[180]	An SD-card size wireless-enabled breadboard friendly Arduino compatible board running at 16 MHz/3.3 V. It can mate with either an RFM12B or RFM69W/HW/CW transceiver from HopeRF, allowing very low cost wireless communication (also available without a transceiver). Programmable from the Arduino IDE through an FTDI cable/adapter, or directly through the USB interface (Moteino-USB revision). Moteino runs DualOptiboot,[181] a custom version of Optiboot that allows wireless programming when external FLASH memory is present. The new MoteinoMEGA based on Atmega1284P offers more I/O, an extra hardware serial port, a massive 128 KB of flash for sketches and 16 KB of RAM (8X more!).
NavSpark[182]	Venus822 (Leon3 SPARC V8 compatible, 100 MHz 32-bit RISC)	SkyTraq[183]	The modified Arduino IDE allows the compiled user sketch to be uploaded onto the processor either with or without the proprietary GNSS software. NavSpark has 17 GPIO pins, which include two UARTs, 1 I²C, 1 SPI, 1 PWM, and a trigger. The first UART is usually used by the GNSS software to output NMEA 0183 data, although this can be disabled. This UART communicates over USB through a PL2303 serial converter and the transmit output is also made available on a pin. A 1 pulse per second signal is produced on a dedicated pin when a valid fix has been made. There is a GPS-only version, a combined GPS/GLONASS version, and a GPS/Beidou version. An adaptor board adds a JST connector for a lithium-ion battery, a charger for the battery, and a microSD card slot connected to the SPI pins.
NB1A[184]			An Arduino-compatible board that includes a battery backed up real-time clock and a four channel DAC. Most Arduino-compatible boards require an additional shield for these resources.
NB2A[185]			Sanguino-compatible board that includes a battery backed up real-time clock and a two channel DAC. Sanguino's feature the ATmega644P, which has additional memory, I/O lines and a second UART.
Nymph[186]	ATmega328P		A compact board with Molex connectors, aimed at environments where vibration could be an issue.
Oak Micros om328p[187]			An Arduino Duemilanove compacted down to a breadboardable device (36 mm x 18 mm) that can be inserted into a standard 600 mil 28-pin socket, with USB capability, ATmega328P, and 6 onboard LEDs.
OpenTag[188]	ATmega328p	Loggerhead Instruments	Arduino-compatible microSD motion datalogging board with accelerometer, magnetometer, gyroscope, pressure, temperature and real-time clock.
Paperduino[189]	ATmega168		An ultra low-cost Arduino compatible, built on a printed paper and cardboard substrate, rather than a PCB.
Photon[190]	STM32F205 [191] (Cortex-M3)	Particle	An ARM-based Wi-Fi development kit with a Broadcom BCM43362 Wi-Fi chip supporting 802.11b/g/n.
PicoDuino [192]	ATTiny85	Peter Misenko	PicoDuino size demonstration. Requires special version of the Arduino IDE (Digispark IDE recommended) Digispark compatible SW/HW Trinket compatible HW (due to bootloader USB vid restriction) Ultra small board 22 mm x 12 mm RGB led Relay/motor driver Reset button.
Pro Micro[193]	ATmega32u4	Sparkfun and clones	A popular low-cost compact Arduino-compatible board. Available in 3.3v and 5v versions.
Rainbowduino[194]			An Arduino-compatible board designed specifically for driving LEDs. It is generally used to drive an 8x8 RGB LED matrix using row scanning, but it can be used for other things.
Sanguino[195]	ATmega644		An open source enhanced Arduino-compatible board that uses an ATMega644P instead of an ATmega168. This provides 64 kB of flash, 4 kB of RAM and 32 general I/O pins in a 40 pin DIP device. It was developed with the RepRap Project in mind.
Seeeduino Mega[196]	ATmega2560[30]	SeeedStudio	Arduino Mega compatible board with 16 extra I/O pins and the same a board size as the Arduino Uno. As with the Arduino Mega, most shields that were designed for the Duemilanove, Diecimila, or Uno will fit, but a few shields will not fit because of interference with the extra pins.
Sippino[197]		SpikenzieLabs	A miniature Arduino compatible board with all of the digital and analog I/O pins brought out into a single line of pins (SIP). Available as a kit, intended for use with a solderless breadboard.
SODAQ Mbili[198]	ATmega1284P	SODAQ	SODAQ, an Arduino Compatible Solar Powered sensor board The Raspberry Pi-sized SODAQ board is built for Solar Powered Data Acquisition. It is fitted with a Lipo charge controller and 12 Grove sockets for plug and play prototyping. It runs at 3.3 V and 8 MHz. It also comes with a DS3231 Real Time Clock and 16 Mbit serial flash for data logging. Its "bee" socket can use a range of different modules, like Xbee, RFbee, Bluetoothbee and GPRSbee to make the board communicate. The latest version has the powerful ATmega1284P microcontroller with 128 KB program space and 16 KB RAM and is still Arduino IDE compatible. Specifications: Power supply by LiPo battery (3.7 V) or via Micro USB connector Solar charge controller with JST connector for Solar Panel up to 2.5 W Battery Monitor DS3231 Real Time Clock and Temperature sensor, clock backup powered by LiPo battery On/Off switch. With the switch in Off position the solar charge circuit is still active and the RTC clock is still powered. ICSP programming header
Sparrow[199]	ATMega328P	Open Home Automation	Arduino compatible board designed specifically for RF mesh network experiments. It features 10 I/Os, a 10 pin ISP programming connector, a connector for a standard LCD display (in 4 bit mode) and a connector for an 2.4 GHz RF module.
Spider Controller[200]			Arduino Mega compatible board designed specifically for robots requiring large numbers of servos. A built in 3 A switchmode power supply allows servos to plug directly into the board. Pin spacing allows making custom shields from standard prototype board.
Stickduino[201]			Similar to a USB key.
Teensy 2.0[202]	ATMEGA32U4 8 bit AVR 16 MHz [203]	PJRC	Teensy 2.0 microcontroller Boards from PJRC.com that run most Arduino sketches using the Teensyduino software add-on to the Arduino IDE.
Teensy 2.0++[204]	AT90USB1286 8 bit AVR 16 MHz[203]	PJRC	Teensy++ 2.0 microcontroller A slightly more powerful version of the Teensy 2.0. It has 46 I/O pins; 8 KB RAM; 128 kB of flash; 10-bit ADC; UART, SPI, I²C, I²S, Touch and other I/O capability.
Teensy 3.0[205]	MK20DX128 32 bit ARM Cortex-M4 48 MHz[203]	PJRC	A very small board based on the Freescale MK20DX128VLH5 CPU. It has 34 I/O pins; 16 KB RAM; 128 kB of flash; 16-bit ADC; 3xUARTs, SPI, I²C, I²S, Touch and other I/O capability. Version 3.0 is not recommended for new designs.
Teensy 3.1/3.2[206]	MK20DX256 32 bit ARM Cortex-M4 72 MHz[203]	PJRC	Same form factor as Teensy 3.0. Based on the Freescale MK20DX256VLH7 CPU. It has 34 I/O pins; 64 KB RAM; 256 kB of flash; 2x16-bit ADC; 12-bit DAC; 3xUARTs, SPI, 2xI²C, I²S, CAN Bus, Touch and other I/O capability. All digital pins are 5 volt tolerant. Teensy 3.2 adds a more powerful 3.3 volt regulator, with the ability to directly power ESP8266 Wifi, WIZ820io Ethernet and other power-hungry 3.3 V add-on boards.
Teensy LC[207]	MKL26Z64VFT4 ARM Cortex-M0+ 48 MHz[207]	PJRC	A lower cost version of the Teensy 3.1/3.2. It has 27 I/O pins; 64 kB of flash; 12-bit DAC; 3xUARTs, 2xSPI, 2xI²C, I²S, Touch and other I/O capability. I/O pins are not 5 V tolerant. No FIFOs on Serial 1 and Serial2. Fewer hardware timers.
TinyDuino[208]	ATmega328p	TinyCircuits[209]	A fully capable Arduino platform smaller than a quarter, yet with all the power and functionality of the Arduino Uno board, including stackable shield support. The TinyDuino also support an option coin cell holder and has many expansion shields available.
TinyLily[210]	ATmega328p	TinyCircuits[209]	A fully capable Arduino platform smaller than a dime, designed for e-textiles. Includes large sewtabs and a header for a USB adapter for communication and programming.
Trinket[211]	ATTiny85	Adafruit	Requires updates to Arduino IDE (or download special version) and driver under Windows. Includes regulator for battery power away from PC. Very low cost.
Wireless Widget[212]			A compact (35 mm x 70 mm), low voltage, battery powered Arduino-compatible board with onboard wireless capable of ranges up to 120 m. The Wireless Widget was designed for both portable and low cost Wireless sensor network applications.
ZB1[213]			An Arduino-compatible board that includes a Zigbee radio (XBee). The ZB1 can be powered by USB, a wall adapter or an external battery source. It is designed for low-cost Wireless sensor network applications.
SunDuino2[109]	ATmega16/32/324/644		An open source enhanced Arduino-compatible board that uses an ATmega16/32/324/644 instead of an ATmega168. This provides 16/32/64 kB of flash, and 32 general I/O pins in a 40 pin DIP device.
OpenEnergyMonitor emonTx[214]	ATmega328		An open-source low power wireless (RFM12B) energy monitoring node based on ATmega328 and JeeNode design and uses the Nanode (another Arduino compatible) design for their receiver.[215]
panStamp[216]	ATmega328	panStamp[216]	Small low-power wireless motes and base boards. Communication library, configuration tools and automation applications are available for panStamps. These wireless miniatures can easily be hooked to different cloud data services via Lagarto,[217] an open automation platform developed for panStamps.[216]
Microduino[218][219]	ATmega168/328/644/1284	Microduino Studio	1" x 1.1" small, stackable, low-cost Arduino-compatible board with a uniformed U-shape 27-pin standard interface.
Versalino Uno[220]	ATmega328p	Virtuabotix	Versalino Uno 1.1 Compact board with pins in two similar layouts "Bus A" and "Bus B". 6 volt input 3.5 mm plug power. Programmed with FTDI.
LeoStick[221]	ATmega32U4	Freetronics	Compact version of the Arduino Leonardo (which can be plugged straight into a USB port without a cable) and has a buzzer and a 3-in-1 RGB LED.
Wattuino Nanite [222][223]	ATtiny85/ATtiny841	Watterott electronic	Very small size and microUSB plug for programming (Micronucleus USB Bootloader). Requires special board package for the Arduino IDE.
Wattuino Pro Mini PB[224]	ATmega328PB	Watterott electronic	An Arduino Pro Mini compatible board with the new ATmega328PB. Requires special board package for the Arduino IDE.

Non-ATmega boards

The following non-ATmega boards accept Arduino shield daughter boards. The microcontrollers are not compatible with the official Arduino IDE, but they do provide a version of the Arduino IDE and compatible software libraries.

Name	Processor	Host interface	Maker	Notes
PIC.duino Net	PIC18F67J60	Ethernet or Serial	SlicMicro	Pin compatible with Arduino but uses the ethernet enabled PIC microcontroller to connect to the Internet. Allows sending of email, display of javascript enabled webpages, and remote web based access and control from around the world.
Leaflabs Maple[225]	STM32 (Cortex-M3)	USB	LeafLabs[226]	A 72 MHz 32-bit ARM Cortex-M3-based microcontroller (ST Microelectronics] STM32F103[227]) with USB support, compatibility with Arduino shields, and 39 GP I/O pins. Programmable with the Open Source Maple IDE,[228] which is a branch of the Arduino IDE. The Maple IDE includes both an implementation of the Arduino Language,[229] and lower-level native libraries (with support from the libmaple C library).[230] The more uptodate Arduino_STM32[231] project allows to use the Mapple, and other generic STM32 boards, into recent 1.6.9+ Arduino environment.
Microchip chipKIT Uno32, Max32, WF32, DP32	PIC32	USB	Digilent[232]	32-bit MIPS-M4K PIC32MX processor boards (40-80 MHz). The Arduino libraries have been implemented natively for the PIC32MX and these kits run in a fork of the standard Arduino IDE, MPIDE[233] and are compatible to most shields.[234][235][236]
Microchip chipKIT Wi-Fire	PIC32MZ	USB	Digilent[232]	32-bit MIPS-M4K PIC32MZ processor boards (200 MHz). The Arduino libraries have been implemented natively for the PIC32MZ and these kits run in a fork of the standard Arduino IDE, MPIDE[233] and are compatible to most shields.[234][235][236]
Freescale Freedom[237]	Kinetis-L (Cortex-M0+)	USB	Freescale[238]	A 48 MHz 32-bit ARM Cortex-M0+-based microcontroller (Freescale MKL25Z128VLK4[239]) with USB support, compatibility with Arduino shields and 64 GP I/O pins. Board embeds the new ARM OpenSDA debug and programming interface through USB and is compatible with the majority of the ARM IDE suppliers.
PRO Family[240]	ARM Cortex LPC1114 LPC1751 LPC1756	USB	Coridium[241]	up to 200 MHz dual core ARM Cortex-M4F, ARM Cortex-M3 and ARM7TDMI-based shield-compatible boards, programmable in BASIC or C with Sketch support with open source MakeItC utilities. All boards have 5 V tolerant I/Os.
Energia	MSP430	USB	Texas Instruments	The Energia project integrates this with the Arduino IDE.[242][243]
Sakura board[244]	Renesas RX63N	USB	Renesas/Wakamatsu Tsusho Co.,Ltd	Web compiler with Sketch support,[245] ethernet interface

Non-Arduino boards

The following boards accept Arduino shield daughter boards. They do not use microcontrollers compatible with the Arduino IDE,^[246] nor do they provide an alternative implementation of the Arduino IDE and software libraries.

Name	Processor	Maker	Notes
CIKU	PIC18F4550	Cytron Technologies	CIKU Features: Comes with pre-programmed PIC18F4550 with USB bootloader. PIC18F4550 running at 48 MHz (after PLL with 10 MHz external crystal). 32 KByte flash/program memory (~28 KB after bootloader). 20 digital I/O pins. 6 analog input pin. 2 PWM output pin. Extra pads with standard 0.1” (2.54 mm) pitch to pitch. Program with MPLAB X IDE and XC8 compiler (library is open source and provided). Program loading via USB HID, GUI from Microchip provided.
Chipino[247]	PIC16F886-I/SP[248]	Howtronics[249]	Chipino is an electronics prototyping platform based on a Microchip PIC microcontroller. It was designed to use the same footprint and connection scheme as the official Arduino boards to allow Arduino shields to be used with Chipino.
Bambino 210	NXP LPC4330	Microint USA	Dual core ARM Cortex-M4/M0, 264 KB SRAM, 4 MB Flash, mbed HDK, Arduino-compatible headers. The Bambino 210E has the same features as the 210, but adds a 10/100 Ethernet port, 8 MB Flash, microSD socket, and Xbee Socket
Cypress PSoC 4 Pioneer Kit (CY8CKIT-042)	Cypress PSoC4 CY8C4245AXI-483	Cypress	The PSoC 4 Pioneer Kit is a development platform enabling users to design with the ARM Cortex-M0 PSoC®4 device family. The kit features the PSoC 4200 device family as the main processor and includes a PSoC 5LP (ARM Cortex-M3 processor) to perform programming and debugging. The kit is supported using PSoC Creator, which is a free IDE for embedded development targeting the PSoC 3/4/5LP device families. In the summer of 2013 Cypress supported the kit with a 100 projects in 100 days campaign on the community forums at Element14.
Arduino Shield Compatible Propeller Board[250]	Parallax Propeller	Parallax	Based on the Parallax Propeller; interfaces with standard Arduino shields. The Propeller comes with a free IDE called "propeller tool", and an alternative IDE tool is available.[251]
Amicus18[252]	PIC		Amicus18 is an embedded system platform based on PIC architecture (18F25K20). Can be programmed with any programming language, though the Amicus IDE is free and complete.
Cortino[253]	ARM STM32		Development system for a 32-bit ARM Cortex-M3-based microcontroller.
Pinguino[254]	PIC		Board based on a PIC microcontroller, with native USB support and compatibility with the Arduino programing language plus an IDE built with Python and sdcc as compiler.
Unduino[255]	PIC		A board based on the dsPIC33FJ128MC202 microcontroller, with integrated motor control peripherals.
Netduino[256]	AT91SAM7X (ARM7)		48 MHz 32-bit ARM7 microcontroller board with support for the .NET Micro Framework. Pin compatible with Arduino shields although drivers are required for some shields.[257]
Vinculo[258]	Vinculum II		FTDI USB development board for the FTDI Vinculum II microcontroller.
FEZ Domino,[259] FEZ Panda,[260] and FEZ Panda II[261]	ARM		72 MHz 32-bit ARM (GHI Electronics USBizi chips) micro-controller boards with support for the .NET Micro Framework. Pin compatible with Arduino shields, although drivers are required for some shields.[262]
TheUno[263]	Freescale S08DZ60	MyFreescaleWebPage[263]	Freescale 8-bit S08DZ60 based Arduino Shield Compatible development board. Programmable in C or assembly language using the free CodeWarrior development environment from Freescale, based on Eclipse. Integrated open-source debugging cable for fast prototyping.
BigBrother[263]	Freescale MCF51AC256	MyFreescaleWebPage[263]	Freescale 32-bit Coldfire MCF51AC256 based Arduino Shield Compatible development board. Programmable in C or assembly language using the free CodeWarrior development environment from Freescale, based on Eclipse and in C++ with CodeSourcery. Integrated open-source debugging cable for fast prototyping. The first Arduino Shield Compatible board with two Arduino slots to add more and more shields.
BigBrother-USB[263]	Freescale MCF51JM128	MyFreescaleWebPage[263]	Freescale 32-bit Coldfire MCF51JM128 based Arduino Shield Compatible development board. Programmable in C or assembly language using the free CodeWarrior development environment from Freescale, based on Eclipse and in C++ with CodeSourcery. Integrated open-source debugging cable for fast prototyping. The first Arduino Shield Compatible board with two Arduino slots to add more and more shields.
Firebird32[264]	Coldfire		Freescale 32-bit Coldfire MCF51JM128 based Arduino Shield Compatible development board. Programmable in StickOS BASIC, and C or assembly language using Flexisframework or CodeWarrior with a step-by-step debugger. The Firebird32 is also available in a special model based on the 8-bit MC9S08JM60.
Stampduino[265]	PIC or Parallax SX	Parallax	Arduino Shield compatible BASIC Stamp 2 board, interfaces with most standard Arduino shields. The BS comes with a free IDE.
STM32 Nucleo[266]	STM32 Family	STMicroelectronics	Arduino connectors and ST Morpho headers
SunDuinoPIC[109]	PIC18F2550 or PIC18F4550		Microchip PIC Arduino hardware compatible board. Based PINGUINO Project. USB HID Bootloader.
Breeze[267][268]	PIC		Breeze boards are prototyping platforms for 28-pin PIC microcontrollers. They come with a PIC18F25K22 (USB-UART interface) or PIC18F25J50 (direct USB interface), however almost any 28-pin PIC can be used with the platform.
Goldilocks[269]	FPGA	Thin Layer Embedded	Goldilocks has three Arduino UNO Shield compatible sockets and a 'helix_4' FPGA Module with Altera Cyclone IV FPGA, DDR2 DRAM, fast SRAM, serial Flash, a MEMs oscillator, power supplies and an Atmel ATSHA204 Authentication IC/EEPROM. The 'helix_4' module is notable for castellated edge connectors; it's designed to be 'soldered-down' to a subsequent PCB development.
Breadstick[270]	FPGA	Thin Layer Embedded	Breadstick has one Arduino UNO Shield compatible socket, 43 GPIO to pin HDRs for breadboarding, and a lower power 'helix_4' FPGA Module with Altera Cyclone IV FPGA, fast SRAM, serial Flash, a MEMs oscillator, power supplies and an Atmel ATSHA204 Authentication IC/EEPROM. The 'helix_4' module is notable for castellated edge connectors; it's designed to be 'soldered-down' to a subsequent PCB development.

See also

• Category 5 cable

References

1. "Arduino - Boards". Arduino.cc. 2009-03-01. Retrieved 2013-01-23.
2. "Arduino - HomePage". Arduino.cc. Retrieved 2013-01-23.
3. https://www.arduino.cc/en/Main/ArduinoBoard101
4. "Intel® Curie™ Module: Unleashing Wearable Device Innovation". intel.com. Retrieved 2015-08-15.
5. http://arduino.cc/en/Main/ArduinoBoardZero
6. "ATSAMD21G18;". Atmel.com. Retrieved 2014-08-12.
7. http://blog.arduino.cc/2015/06/15/arduino-zero-now-available-for-purchase/
8. http://blog.arduino.cc/2014/05/15/meet-arduino-zero/
9. http://blog.arduino.cc/2014/08/01/20-arduino-zero-dev-edition-available-for-beta-testing-join-us/
10. "ArduinoBoardDue". Arduino.cc. Retrieved 2013-01-18.
11. Chirgwin, Richard (2011-09-20). "Arduino to add ARM board this year". The Register. Retrieved September 20, 2011.
12. "AT91SAM3X8E;". Atmel.com. Retrieved 2013-01-18.
13. "ATmega16U2". Atmel.com. Retrieved 2013-01-18.
14. "SAM3U4E". Atmel.com. Retrieved 2013-01-18.
15. "atmel.com". atmel.com. Retrieved 2013-01-18.
16. "Arduino Blog- Arduino Due is finally here". Arduino.cc. 2012-10-22. Retrieved 2013-01-18.
17. http://arduino.cc/en/Main/ArduinoBoardYun
18. "ATmega32U4". Atmel.com. Retrieved 2013-01-18.
19. http://blog.arduino.cc/2013/08/21/updating-about-arduino-yun-and-arduino-robot/
20. "Arduino - ArduinoBoardLeonardo". Arduino.cc. Retrieved 2013-01-23.
21. "ArduinoBoardLeonardo". Arduino.cc. Retrieved 2013-01-18.
22. "Arduino Blog- Massimo Introduces Arduino Leonardo". Arduino.cc. 2012-07-23. Retrieved 2013-01-18.
23. "Arduino - ArduinoBoardUno". Arduino.cc. Retrieved 2013-01-23.
24. "ArduinoBoardUno". Arduino.cc. Retrieved 2013-01-18.
25. "ATmega328P". Atmel.com. Retrieved 2013-01-18.
26. "ATmega8U2". Atmel.com. Retrieved 2013-01-18.
27. "Arduino Blog- Dinner is Ready". Arduino.cc. 2010-09-24. Retrieved 2013-01-18.
28. "Arduino - ArduinoBoardMega2560". Arduino.cc. Retrieved 2013-01-23.
29. "ArduinoBoardMega2560". Arduino.cc. Retrieved 2013-01-18.
30. "ATmega2560". Atmel.com. Retrieved 2013-01-18.
31. "ArduinoBoardEthernet". Arduino.cc. Retrieved 2013-01-18.
32. "ATmega328". Atmel.com. Retrieved 2013-01-18.
33. "Arduino Blog- Arduino Ethernet, ADK Available for purchase". Arduino.cc. 2011-07-13. Retrieved 2013-01-18.
34. "Arduino - ArduinoEthernetShield". Arduino.cc. Retrieved 2013-01-23.
35. "ArduinoBoardFio". Arduino.cc. Retrieved 2013-01-18.
36. "Arduino Blog- Arduino FIO presented at Uno Punto Zero". Arduino.cc. 2010-03-18. Retrieved 2013-01-18.
37. "Arduino - ArduinoBoardFio". Arduino.cc. Retrieved 2013-01-23.
38. "ArduinoBoardNano". Arduino.cc. Retrieved 2013-01-18.
39. "ATmega168". Atmel.com. Retrieved 2013-01-18.
40. "FT232R". ftdichip.com. Retrieved 2014-08-14.
41. "Arduino Blog- Arduino Nano: all-in-one design for breadboard use". Arduino.cc. 2008-05-15. Retrieved 2013-01-18.
42. "ArduinoBoardLilyPad". Arduino.cc. Retrieved 2013-01-18.
43. "Arduino Blog- LilyPad Arduino and Arduino 0010". Arduino.cc. 2007-10-17. Retrieved 2013-01-18.
44. arduino.cc
45. "ArduinoBoardADK". Arduino.cc. Retrieved 2013-01-18.
46. "ArduinoBoardEsplora". Arduino.cc. Retrieved 2013-01-18.
47. "ArduinoBoardMicro". Arduino.cc. Retrieved 2013-01-18.
48. "Arduino Blog- New Arduino Micro available". Arduino.cc. 2012-11-08. Retrieved 2013-01-18.
49. "Arduino - ArduinoBoardSerial". Arduino.cc. Retrieved 2013-01-23.
50. "ATmega8". Atmel.com. Retrieved 2014-08-14.
51. "Arduino - ArduinoBoardBluetooth". Arduino.cc. Retrieved 2013-01-23.
52. "Arduino Board Bluetooth". Arduino.cc. Retrieved 2013-01-18.
53. "Arduino Blog- Arduino Diecimila and BT reference designs now available". Arduino.cc. 2007-10-22. Retrieved 2013-01-18.
54. "ArduinoBoardDiecimila". Arduino.cc. Retrieved 2013-01-18.
55. "Arduino - ArduinoBoardDuemilanove". Arduino.cc. Retrieved 2013-01-23.
56. "Arduino Board Duemilanove". Arduino.cc. Retrieved 2013-01-18.
57. "Arduino Blog- Arduino Duemilanove". Arduino.cc. 2008-10-19. Retrieved 2013-01-18.
58. "Arduino - ArduinoBoardMega". Arduino.cc. Retrieved 2013-01-23.
59. "ArduinoBoardMega". Arduino.cc. Retrieved 2013-01-18.
60. "ATmega1280". Atmel.com. Retrieved 2013-01-18.
61. "Arduino Blog- Arduino Mega: bigger, more powerful, still blue". Arduino.cc. 2009-03-26. Retrieved 2013-01-18.
62. "Arduino - ArduinoBoardMega". Arduino.cc. Retrieved 2013-01-23.
63. "ArduinoBoardProMini". Arduino.cc. Retrieved 2013-01-18.
64. "Arduino Blog- Arduino Pro and Pro Mini". Arduino.cc. 2008-08-23. Retrieved 2013-01-18.
65. "Freeduino Open Source Hardware Files". Freeduino.org. Retrieved 2013-01-23.
66. "GSTduino – Arduino Compatible Special Purpose Board". www.greensystemtech.com. Retrieved 2016-10-26.
67. http://www.linear.com/solutions/linduino
68. http://www.ventor.co.in/index.php?main_page=product_info&cPath=16&products_id=86
69. http://www.ventor.co.in/
70. http://www.inviot.com/
71. "SainSmart UNO". sainsmart.com. Retrieved 2013-01-23.
72. "SainSmart-Open Hardware Company". sainsmart.com. Retrieved 2013-01-23.
73. "SainSmart Mega 2560". sainsmart.com. Retrieved 2013-01-23.
74. http://elecfreaks.com/store/download/Freaduino2560_Schematic.pdf
75. http://www.elecfreaks.com/
76. "SainSmart UNO R3". sainsmart.com. Retrieved 2013-01-23.
77. Tavir-AVR. "Tavir-AVR :: Bascom, Arduino, Wiring - Programozás, Fórum, ingyenes mintaalkalmazások, könyvek". Avr.tavir.hu. Retrieved 2013-01-23.
78. "TavIR : Mikrokontroller világ | A gyakorlati tudás tárháza" (in Hungarian). Tavir.hu. Retrieved 2013-01-23.
79. "Brasuíno". Brasuino.holoscopio.com. Retrieved 2013-01-23.
80. "Holoscópio". Holoscopio.com. 2011-07-18. Retrieved 2013-01-23.
81. "Chibiduino2". tiisai.dip.jp. Retrieved 17 Aug 2013.
82. "Arduino совместимая платформа "Cosmo Black Star" :: платы Arduino". Jt5.ru. Retrieved 2013-01-23.
83. "JT5 :: инжиниринговая компания специализирующая на разработке и производстве электронных устройств". Jt5.ru. Retrieved 2013-01-23.
84. "CraftDuino / RoboCraft.ru / RoboCraft". Robocraft.ru. Retrieved 2013-01-23.
85. evilmadscientist.com
86. "Electronics | multiplo Robot Building System". Multiplo.org. Retrieved 2013-01-23.
87. "multiplo Robot Building System |". Multiplo.org. Retrieved 2013-01-23.
88. "アーデュイーノ互換マイコン・ボードを作る". Shop.cqpub.co.jp. Retrieved 2013-01-23.
89. "Platino - Versatile Board for AVR Microcontrollers [100892 & 150555] | Elektor Labs". www.elektor-labs.com. Retrieved 2015-11-04.
90. "MaxSerial : Fundamental Logic WebStore, Electronic Kits and Components". Store.fundamentallogic.com. 2010-05-30. Retrieved 2013-01-23.
91. "fayalab inc. | fayalab inc". www.fayalab.com. Retrieved 2016-02-18.
92. "SB-Freeduino". Solarbotics. Retrieved 2013-01-23.
93. "Solarbotics". Solarbotics. Retrieved 2013-01-23.
94. "Freeduino USB complete KIT (Arduino Duemilanove Compatible)". Nkcelectronics.com. Retrieved 2013-01-23.
95. "Illuminato::Genesis". Liquidware. Retrieved 2013-01-23.
96. http://www.induino.com/wiki/index.php?title=InduinoX. Retrieved August 13, 2011. Missing or empty |title= (help)
97. "Simple Labs | Simplifying Technology". Build.simplelabs.co.in. Retrieved 2013-01-23.
98. "Vol.27 テクノ工作セット（8ビットマイコン＋光残像キット） | 大人の科学マガジン | 大人の科学.net". Otonanokagaku.net. Retrieved 2013-01-23.
99. "990.110". Droids.it. Retrieved 2013-01-23.
100. "990.023 Luigino328 - User Manual [EN]". Droids.it. Retrieved 2013-01-23.
101. "Metaboard – Metalab" (in German). Metalab.at. Retrieved 2013-01-23.
102. "small computers for art and science". Rascal Micro. Retrieved 2013-01-23.
103. https://web.archive.org/web/20130331012625/http://www.bitwizard.nl/wiki/index.php/Raspduino. Archived from the original on March 31, 2013. Retrieved January 23, 2013. Missing or empty |title= (help)
104. "BitWizard". Bitwizard.nl. Retrieved 2013-01-23.
105. "DFRduino Romeo-All in one Controller V1.1(SKU:DFR0004) - Robot Wiki". Dfrobot.com. Retrieved 2013-01-23.
106. "DFRobot-An Online Opensource Robot and Hardware Shop". Dfrobot.com. Retrieved 2013-01-23.
107. "Tools, Parts, Kits for DIY'ers". Curious Inventor. Retrieved 2013-01-23.
108. "Seeeduino V3.0 (Atmega 328P) [ARD130D2P] - $22.50 : Seeed Studio Bazaar, Boost ideas, extend the reach". Seeedstudio.com. Retrieved 9 Nov 2014.
109. "SunDUINO Nowy wymiar elektroniki". Sunduino.pl. Retrieved 2013-01-23.
110. TwentyTen (100% Arduino Compatible). "Parts & Kits for Arduino Online, Buy Microcontroller Boards, Electronic Components for Arduino - TwentyTen (100% Arduino Compatible)". Freetronics. Retrieved 2013-01-23.
111. "Parts & Kits for Arduino Online, Buy Microcontroller Boards, Electronic Components for Arduino - Welcome". Freetronics. Retrieved 2013-01-23.
112. "Volksduino: complete low-cost Arduino clone". Appliedplatonics.com. Retrieved 2013-01-23.
113. "Applied Platonics". Applied Platonics. Retrieved 2013-01-23.
114. "Wise time with Arduino". Timewitharduino.blogspot.com. Retrieved 2013-01-23.
115. http://www.obdiiworld.com/ obdiiworld.com]] (parts in Chinese?)
116. "YourDuino". YourDuino. Retrieved 2013-01-23.
117. "YourDuinoRobo1 (Upgraded Arduino Compatible)". Arduino-direct.com. Retrieved 2014-09-23.
118. geekstudio.co.za
119. "Zigduino r1 - Logos Electromechanical". Logos-electro.com. Retrieved 2013-01-23.
120. "Products & Services - Logos Electromechanical". Logos-electro.com. 1999-02-22. Retrieved 2013-01-23.
121. http://www.freetronics.com/collections/arduino/products/etherten
122. http://www.freetronics.com/collections/arduino/products/ethermega-arduino-mega-2560-compatible-with-onboard-ethernet
123. http://www.freetronics.com/collections/arduino/products/usbdroid
124. http://www.freetronics.com/collections/arduino/products/eleven
125. http://www.freetronics.com/collections/arduino/products/kitten
126. CATkit
127. http://www.freetronics.com/collections/arduino/products/etherdue-arduino-due-compatible-with-onboard-ethernet
128. http://www.elechouse.com/elechouse/index.php?main_page=product_info&cPath=72_73&products_id=2212
129. "Io:duino". Railstars. Retrieved 2013-01-23.
130. "DFRobotShop Rover V2 - Arduino Compatible Tracked Robot (Basic Kit)". RobotShop. Retrieved 2013-01-23.
131. "Mindsets online". Mindsets online. 2007-03-01. Retrieved 2013-01-23.
132. "Mindsets online.co.uk". Mindsets online.co.uk. 2007-03-01. Retrieved 2013-01-23.
133. mindsetsonline.co.uk
134. "Bump and Reverse Robot Kit (Faraduino) - Faraduino". Mindsets online. 2007-03-01. Retrieved 2013-01-23.
135. "Faraconnect Shield (Faraduino) - Faraduino". Mindsets online. 2007-03-01. Retrieved 2013-01-23.
136. "Motoruino | GUIBOT". Guibot.pt. Retrieved 2013-01-23.
137. Anderson, Chris (2009-01-21). "ArduPilot (Legacy) main page". DIY Drones. Retrieved 2013-01-23.
138. "Flyduino Shop - Multirotor, Multicopter Teile & Zubehör für Quadrocopter, Hexacopter, Octocopter - Motore, Rahmen, FCs & ESCs". Flyduino.net. Retrieved 2013-01-23.
139. "Arduino совместимая платформа "Колибри" с RF радиомодулем 868 Mhz :: платы Arduino". Jt5.ru. 2012-03-30. Retrieved 2013-01-23.
140. "JeeNode - JeeLabs Hardware - JeeLabs . net". Jeelabs.net. Retrieved 2013-01-23.
141. http://www.freetronics.com/collections/arduino/products/arduphone-arduino-compatible-cellphone
142. http://wtfduino.co.uk
143. http://tah.io
144. http://revealinghour.in
145. "Controllino". Retrieved 19 July 2016.
146. "FA-DUINO-12RA (INDUSTRIAL ARDUINO)". Retrieved 19 July 2016.
147. "ARDBOX". Retrieved 19 July 2016.
148. "Industruino". Retrieved 12 June 2015.
149. "iono".
150. "Ardweeny". Solarbotics. Retrieved 2013-01-23.
151. "Banguino". Dimitech. Retrieved 14 Jun 2014.
152. "Bare Bones Board (BBB) Kit | Modern Device". Shop.moderndevice.com. Retrieved 2013-01-23.
153. "RBBB Kit | Modern Device". Shop.moderndevice.com. Retrieved 2013-01-23.
154. "аналог Arduino, но другой. ;)". Blockduino. Retrieved 2013-01-23.
155. "Каталог блоков от BlockDuino". Blockduino.org. Retrieved 2013-01-23.
156. "Boarduino - Breadboard-compatible Arduino Clone". Ladyada.net. 2011-08-15. Retrieved 2013-01-23.
157. "Breaduino: the all-breadboard Arduino clone". Appliedplatonics.com. Retrieved 2013-01-23.
158. "Croduino Basic 5x3cm Arduino Duemilanove compatible board". e-radionica.com. Retrieved 2016-01-15.
159. chip45.com
160. chip45.com
161. "Microcontroller Modules, Boards, Tools and Accessories for Atmel AVR ATmega Xmega Processors". Chip45.com. Retrieved 2013-01-23.
162. "Electronics for Hobbyists". Circuit Monkey. Retrieved 2013-01-23.
163. "Digispark USB Development Board". Retrieved 2014-06-05.
164. "Digistump". Retrieved 2014-06-05.
165. "DragonFly - ATmega1280 Arduino Bundle - Circuit Monkey". Circuitmonkey.com. Retrieved 2014-11-04.
166. "iDuino Complete Kit [iDuino-3-kit] - $21.00 : Fundamental Logic WebStore, Electronic Kits and Components". Spiffie.org. 2010-05-30. Retrieved 2013-01-23.
167. Albino, Alejandro (2012-04-21). "Smallest Arduino". Femtoduino. Retrieved 2013-01-23.
168. "freeduino lite v2". Bhashatech.com. Retrieved 2013-01-23.
169. "Bhasha Technologies". Bhashatech.com. Retrieved 2013-01-23.
170. "Freeduino Serial india". Bhashatech.com. 2009-08-23. Retrieved 2013-01-23.
171. "Femtoduino: an ultrasmall (20.7x15.2 mm) libre Arduino compatible board". Varesano.net. Retrieved 2013-01-23.
172. , specifications
173. , Femtoduino.com website
174. "JN - JeeLabs Hardware - JeeLabs . net". Jeelabs.net. Retrieved 2013-01-23.
175. Computing stuff tied to the physical world (2013-01-19). "JeeLabs". JeeLabs. Retrieved 2013-01-23.
176. "Wiki - JeeLabs Hardware - JeeLabs . net". Jeelabs.net. Retrieved 2013-01-23.
177. , LCDuino blog
178. "Silicon Railway. Small, powerful, and versatile at a reasonable cost". Siliconrailway.com. Retrieved 2013-01-23.
179. lowpowerlab.com, All about Moteino
180. lowpowerlab.com
181. DualOptiboot
182. "NavSpark Community". Retrieved 2014-06-05.
183. "SkyTraq". Retrieved 2014-06-05.
184. "Wiblocks - NB1A - ATmega328 + DAC + RTC". Wiblocks.luciani.org. Retrieved 2013-01-23.
185. "Wiblocks - NB2 System". Wiblocks.luciani.org. Retrieved 2013-01-23.
186. "Electronics for Hobbyists". Circuit Monkey. Retrieved 2013-01-23.
187. "om328p". Oak Micros. Retrieved 2013-01-23.
188. "OpenTag Board". Loggerhead Instruments. Archived from the original on 9 Nov 2014. Retrieved 9 Nov 2014.
189. "Guilherme Martins : PAPERduino's design". Lab.guilhermemartins.net. Retrieved 2013-01-23.
190. "Particle Store". Particle. Retrieved 2015-09-28.
191. "STM32F2x5". st.com. Retrieved 2015-09-28.
192. "Picoduino". Peter Misenko. Retrieved 4 June 2014.
193. https://www.sparkfun.com/products/12640
194. "Rainbowduino LED driver platform - Atmega 328 Rainbowduino LED driver platform - Plug and Shine! [ARD127D2P] - $24.90 : Seeed Studio Bazaar, Boost ideas, extend the reach". Seeedstudio.com. Retrieved 2013-01-23.
195. "What Is Sanguino?". Sanguino.cc. Retrieved 2013-01-23.
196. "Seeeduino Mega [ARD121D2P] - $43.00 : Seeed Studio Bazaar, Boost ideas, extend the reach". Seeedstudio.com. Retrieved 2013-01-23.
197. "Sippino". SpikenzieLabs. 2011. Archived from the original on 15 Aug 2014. Retrieved 9 Nov 2014.
198. "SODAQ board". www.sodaq.net. Retrieved 2 Oct 2013.
199. "Sparrow prototyping board". open-homeautomation.com. Retrieved 2013-05-13.
200. "Red Back Spider robot controller | Let's Make Robots!". Letsmakerobots.com. Retrieved 2013-01-23.
201. "StickDuino - USB Stick Sized Arduino Clone". Spiffie.org. Retrieved 2013-01-23.
202. PJRC Teensy 2.0
203. PJRC teensy variants
204. PJRC Teensy 2.0++
205. , PRJC Teensy 3.0
206. PJRC Teensy 3.1/3.2
207. TeensyLC
208. "TinyDuino". TinyCircuits. Retrieved 2013-01-23.
209. "A Maker of Tiny Open Source Circuits". TinyCircuits. Retrieved 2013-01-23.
210. "TinyLily". TinyCircuits. Retrieved 2013-01-23.
211. https://learn.adafruit.com/introducing-trinket
212. "strobit - Strobit Wireless Widget Open Hardware Project - Google Project Hosting". Code.google.com. Retrieved 2013-01-23.
213. "Wiblocks - ZB1 System". Wiblocks.luciani.org. Retrieved 2013-01-23.
214. OpenEnergyMonitor. "emonTx". OpenEnergyMonitor. Retrieved 2013-01-23.
215. "Project:Nanode - London Hackspace". Wiki.london.hackspace.org.uk. Retrieved 2013-01-23.
216. "Wireless Arduino-compatible miniatures". panStamp. Retrieved 2013-01-23.
217. https://web.archive.org/web/20131218102254/http://code.google.com/p/panstamp/wiki/lagarto. Archived from the original on December 18, 2013. Retrieved March 17, 2015. Missing or empty |title= (help)
218. "Microduino Wiki(English)". www.microduino.net. Retrieved 10 Oct 2013.
219. "Microduino Wiki(中文)". www.microduino.net. Retrieved 10 Oct 2013.
220. Versalino-Uno
221. http://www.freetronics.com/collections/arduino/products/leostick
222. https://github.com/watterott/wattuino#wattuino-nanite-85
223. https://github.com/watterott/wattuino#wattuino-nanite-841
224. https://github.com/watterott/wattuino#wattuino-pro-mini-pb
225. "leaflabs.com". leaflabs.com. Retrieved 2013-01-23.
226. "leaflabs.com". leaflabs.com. Retrieved 2013-01-23.
227. st.com
228. "leaflabs/maple-ide · GitHub". Github.com. Retrieved 2013-01-23.
229. "Arduino - Reference". Arduino.cc. Retrieved 2013-01-23.
230. "leaflabs/libmaple · GitHub". Github.com. Retrieved 2013-01-23.
231. https://github.com/rogerclarkmelbourne/Arduino_STM32
232. "Digital Design Engineer's Source". Digilent Inc. Retrieved 2013-01-23.
233. "chipKIT32/chipKIT32-MAX · GitHub". Github.com. Retrieved 2013-01-23.
234. "Digital Design Engineer's Source". Digilent Inc. Retrieved 2013-01-23.
235. "Digital Design Engineer's Source". Digilent Inc. Retrieved 2013-01-23.
236. "chipKIT Uno32: first impressions and benchmarks". Hackaday.com. 2011-05-27. Retrieved 2013-01-23.
237. "Freescale Freedom Development Platform for Kinetis KL14, KL15, KL24, KL25 MCUs". Archived from the original on 6 Oct 2014.
238. "Welcome to Freescale - Freescale Semiconductor". Freescale.com. Retrieved 2013-01-23.
239. "KL2 Product Summary Page". Freescale.com. Retrieved 2013-01-23.
240. "Coridium". Coridiumcorp.com. Retrieved 2013-01-23.
241. "Coridium". Coridiumcorp.com. Retrieved 2013-01-23.
242. "Use Arduino code on a TI Launchpad MSP430". Instructables. 14 August 2012.
243. "Energia". Github.
244. "Sakura board homepage". Gadget Renesas project. Retrieved 2013-10-28.
245. "Feature description of board and web compiler". Renesas. Retrieved 2013-10-28.
246. "Arduino - Software". Arduino.cc. Retrieved 2013-01-23.
247. "CHIPINO - The Microchip PIC Based Arduino Style Module". Chipino.com. Retrieved 15 November 2014.
248. "CHIPINO-FAQ". Chipino.com. Retrieved 15 November 2014.
249. "CHIPINO". Howtronics.com. Howtronics. Retrieved 15 November 2014.
250. propellerpowered.com
251. "QuickStart 1: Comparison of Programming Tools". Parallax Semiconductor. Retrieved 2013-01-23.
252. Mitchell, Graham (2010-06-09). "Introducing The Amicus18 [195] | Amicus18 Beginner Guides | Amicus18". Digital-diy.com. Retrieved 2013-01-23.
253. "Bugblat Cortino". Bugblat.com. 2012-01-04. Retrieved 2013-01-23.
254. "PINGUINO Project". Hackinglab.org. 2010-08-26. Retrieved 2013-01-23.
255. unduino.com
256. "home". Netduino. Retrieved 2013-01-23.
257. "Overview". Netduino. Retrieved 2013-01-23.
258. "Development Modules". Ftdichip.com. Retrieved 2013-01-23.
259. "FEZ Domino". GHI Electronics. Retrieved 2013-01-23.
260. "FEZ Panda". GHI Electronics. Retrieved 2013-01-23.
261. FEZ Cerbuino Bee. "FEZ Panda II". GHI Electronics. Retrieved 2013-01-23.
262. https://web.archive.org/web/20110311091334/http://www.tinyclr.com/compare/. Archived from the original on March 11, 2011. Retrieved August 13, 2011. Missing or empty |title= (help)
263. "MyFreescaleWebPage". MyFreescaleWebPage. Retrieved 2013-01-23.
264. firebird32.com
265. parallax.com
267. Breeze Boards Dizzy Enterprises website
268. Arduino clone with mikroBUS socket mikroElektronika news article
269. Goldilocks Dev Board Thin Layer website
270. Thin Layer website

Further reading

• Evans, Martin; Noble, Joshua; Hochenbaum, Jordan (August 28, 2012). Arduino in Action (1st ed.). Manning. p. 300. ISBN 978-1617290244.
• McComb, Gordon (June 5, 2012). Arduino Robot Bonanza (1st ed.). McGraw-Hill. p. 40. ISBN 978-0-07-178277-7.
• Olsson, Tony (May 30, 2012). Arduino Wearables (1st ed.). Apress. p. 400. ISBN 978-1-4302-4359-5.
• Anderson, Rick; Cervo, Dan (May 16, 2012). Pro Arduino (1st ed.). Apress. p. 350. ISBN 978-1-4302-3939-0.
• Wilcher, Don (April 30, 2012). Learn Electronics with Arduino (1st ed.). Apress. p. 350. ISBN 978-1-4302-4266-6.
• Melgar, Enrique Ramos; Diez, Ciriaco Castro Diez (March 26, 2012). Arduino and Kinect Projects: Design, Build, Blow Their Minds (1st ed.). Apress. p. 350. ISBN 978-1-4302-4167-6.
• Böhmer, Mario (March 26, 2012). Beginning Android ADK with Arduino (1st ed.). Apress. p. 350. ISBN 978-1-4302-4197-3.
• Jepson, Brian; Igoe, Tom (March 22, 2012). Getting Started with NFC: Contactless Communication with Android, Arduino, and Processing (1st ed.). O'Reilly Media/Make. p. 30. ISBN 978-1-4493-0852-0.
• Doukas, Charalampos (March 14, 2012). Arduino, Sensors, and the Cloud (1st ed.). Apress. p. 350. ISBN 978-1-4302-4125-6.
• Riley, Mike (March 7, 2012). Programming Your Home: Automate with Arduino, Android, and Your Computer (1st ed.). Pragmatic Bookshelf. p. 200. ISBN 978-1-934356-90-6.
• Igoe, Tom (February 22, 2012). Getting Started with RFID: Identify Objects in the Physical World with Arduino (1st ed.). O'Reilly Media. p. 40. ISBN 978-1-4493-2418-6.
• Borenstein, Greg (February 3, 2012). Making Things See: 3D vision with Kinect, Processing, Arduino, and MakerBot (1st ed.). O'Reilly Media. p. 440. ISBN 978-1-4493-0707-3.
• Noble, Joshua (January 30, 2012). Programming Interactivity (2nd ed.). O'Reilly Media. p. 726. ISBN 978-1-4493-1144-5.
• Margolis, Michael (December 30, 2011). Arduino Cookbook (2nd ed.). O'Reilly Media. p. 724. ISBN 978-1-4493-1387-6.
• Premeaux, Emery; Evans, Brian (December 7, 2011). Arduino Projects to Save the World (1st ed.). Apress. p. 256. ISBN 978-1-4302-3623-8.
• Wheat, Dale (November 16, 2011). Arduino Internals (1st ed.). Apress. p. 392. ISBN 978-1-4302-3882-9.
• Monk, Simon (November 15, 2011). Arduino + Android Projects for the Evil Genius: Control Arduino with Your Smartphone or Tablet (1st ed.). McGraw-Hill. p. 224. ISBN 978-0-07-177596-0.
• Timmis, Harold (November 9, 2011). Practical Arduino Engineering (1st ed.). Apress. p. 328. ISBN 978-1-4302-3885-0.
• Monk, Simon (November 8, 2011). Programming Arduino: Getting Started With Sketches (1st ed.). McGraw-Hill. p. 176. ISBN 978-0-07-178422-1.
• Evans, Brian (October 17, 2011). Beginning Arduino Programming (1st ed.). Apress. p. 272. ISBN 978-1-4302-3777-8.
• Igoe, Tom (September 26, 2011). Making Things Talk: Using Sensors, Networks, and Arduino to see, hear, and feel your world (2nd ed.). O'Reilly Media/Make. p. 496. ISBN 978-1-4493-9243-7.
• Allan, Alasdair (September 22, 2011). iOS Sensor Apps with Arduino: Wiring the iPhone and iPad into the Internet of Things (1st ed.). O'Reilly Media. p. 126. ISBN 978-1-4493-0848-3.
• Banzi, Massimo (September 20, 2011). Getting Started with Arduino (2nd ed.). O'Reilly Media/Make. p. 128. ISBN 978-1-4493-0987-9.
• Smith, Alan G (August 19, 2011). Introduction to Arduino: A piece of cake (PDF) (1st ed.). CreateSpace. p. 170. ISBN 978-1-4636-9834-8.
• Warren, John-David; Adams, Josh; Molle, Harald (July 18, 2011). Arduino Robotics (1st ed.). Apress. p. 450. ISBN 978-1-4302-3183-7.
• Karvinen, Tero; Karvinen, Kimmo (April 6, 2011). Make: Arduino Bots and Gadgets: Six Embedded Projects with Open Source Hardware and Software (1st ed.). O'Reilly Media/Make. p. 296. ISBN 978-1-4493-8971-0.
• Margolis, Michael (March 15, 2011). Arduino Cookbook (1st ed.). O'Reilly Media. p. 660. ISBN 978-0-596-80247-9.
• Schmidt, Maik (March 10, 2011). Arduino: A Quick Start Guide (1st ed.). The Pragmatic Bookshelf. p. 296. ISBN 978-1-934356-66-1.
• Faludi, Robert (January 4, 2011). Building Wireless Sensor Networks: with ZigBee, XBee, Arduino, and Processing (1st ed.). O'Reilly Media. p. 320. ISBN 978-0-596-80774-0.
• McRoberts, Michael (December 20, 2010). Beginning Arduino (1st ed.). Apress. p. 350. ISBN 978-1-4302-3240-7.
• Monk, Simon (August 23, 2010). 30 Arduino Projects for the Evil Genius (1st ed.). McGraw-Hill. p. 208. ISBN 978-0-07-174133-0.
• F. Barrett, Steven; Thornton, Mitchell (April 30, 2010). Arduino Microcontroller Processing for Everyone! (1st ed.). Morgan and Claypool Publishers. p. 344. ISBN 978-1-60845-437-2.
• Pardue, Joe (January 15, 2010). An Arduino Workshop (1st ed.). Smiley Micros. p. 214. ISBN 978-0-9766822-2-6.
• Oxer, Jonathan; Blemings, Hugh (December 28, 2009). Practical Arduino: Cool Projects for Open Source Hardware (1st ed.). Apress. p. 450. ISBN 978-1-4302-2477-8.
• Noble, Joshua (July 15, 2009). Programming Interactivity: A Designer's Guide to Processing, Arduino, and openFrameworks (1st ed.). O'Reilly Media. p. 736. ISBN 978-0-596-15414-1.

External links

• Media related to Arduino compatibles at Wikimedia Commons