LNER Thompson Class Q1

LNER Thompson Class Q1
Type and origin
Power type Steam
Designer Edward Thompson (rebuild)
Rebuild date 1942–1945
Number rebuilt 13
Specifications
Configuration 0-8-0T
Gauge 4 ft 8 1⁄2 in (1,435 mm) standard gauge
Driver dia. 4 ft 8 in (1.422 m)
Loco weight Q1/1: 69.9 long tons (71.0 t; 78.3 short tons)
Q1/2: 73.65 long tons (74.83 t; 82.49 short tons)
Fuel type Coal
Fuel capacity Q1/1: 4.5 long tons (4.6 t; 5.0 short tons)
Q1/2: 4 long tons (4.1 t; 4.5 short tons)
Water cap Q1/1: 1,500 imp gal (6,800 l; 1,800 US gal)
Q1/2: 2,000 imp gal (9,100 l; 2,400 US gal)
Boiler pressure 180 psi (1.2 MPa)
Cylinders Two outside
Cylinder size 19 in × 26 in (483 mm × 660 mm)
Valve gear Stephenson
Performance figures
Tractive effort 25,645 lbf (114.07 kN)
Career
Operators
Class Q1
Withdrawn 1954–1959
Disposition All scrapped

The London and North Eastern Railway (LNER) Thompson Class Q1 was a class of 0-8-0T steam locomotives. They were rebuilds of the GCR Class 8A (LNER Class Q4) 0-8-0s. Thirteen were rebuilt between 1942 and 1945. All passed to British Railways in 1948 and they were numbered 69925-69937. The sources for the information in the infobox (right) are.[1][2]

Overview

The locomotives had outside cylinders with inside valves and inside Stephenson valve gear. There were two variants:

The extra 500 imperial gallons (2,300 l; 600 US gal) of water in the Q1/2 was carried in the rear tank, under the coal bunker, resulting in a reduced coal capacity.

Withdrawal

All the Class Q1 locomotives were withdrawn and scrapped from 1954 to 1959. None have been preserved.

Further reading

References

  1. ↑ Ian Allan ABC of British Railways Locomotives, part 4 (1948 ed.). p. 56.
  2. ↑ "The Thompson Q1 0-8-0T Locomotives". The London & North Eastern (LNER) Encyclopedia.
This article is issued from Wikipedia - version of the 10/4/2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.