Instructional design

Instructional design, or instructional systems design (ISD), is the practice of creating "instructional experiences which make the acquisition of knowledge and skill more efficient, effective, and appealing."[1] The process consists broadly of determining the state and needs of the learner, defining the end goal of instruction, and creating some "intervention" to assist in the transition. Ideally, the process is informed by pedagogically (process of teaching) and andragogically (adult learning) tested theories of learning and may take place in student-only, teacher-led or community-based settings. The outcome of this instruction may be directly observable and scientifically measured or completely hidden and assumed. There are many instructional design models but many are based on the ADDIE model with the five phases: analysis, design, development, implementation, and evaluation. As a field, instructional design is historically and traditionally rooted in cognitive and behavioral psychology, though recently constructivism has influenced thinking in the field.[2][3][4]

History

Origins

During World War II, a considerable amount of training materials for the military were developed based on the principles of instruction, learning, and human behavior. Tests for assessing a learner’s abilities were used to screen candidates for the training programs. After the success of military training, psychologists began to view training as a system, and developed various analysis, design, and evaluation procedures.[5] In 1946, Edgar Dale outlined a hierarchy of instructional methods, organized intuitively by their concreteness.[6][7]

1950s

B. F. Skinner's 1954 article “The Science of Learning and the Art of Teaching” suggested that effective instructional materials, called programmed instructional materials, should include small steps, frequent questions, and immediate feedback; and should allow self-pacing.[5] Robert F. Mager popularized the use of learning objectives with his 1962 article “Preparing Objectives for Programmed Instruction”. The article describes how to write objectives including desired behavior, learning condition, and assessment.[5] In 1956, a committee led by Benjamin Bloom published an influential taxonomy with three domains of learning: cognitive (what one knows or thinks), psychomotor (what one does, physically) and affective (what one feels, or what attitudes one has). These taxonomies still influence the design of instruction.[6][8]

Bloom's Taxonomy

1960s

Robert Glaser introduced “criterion-referenced measures” in 1962. In contrast to norm-referenced tests in which an individual's performance is compared to group performance, a criterion-referenced test is designed to test an individual's behavior in relation to an objective standard. It can be used to assess the learners’ entry level behavior, and to what extent learners have developed mastery through an instructional program.[5]

In 1965, Robert Gagne (see below for more information) described three domains of learning outcomes (cognitive, affective, psychomotor), five learning outcomes (Verbal Information, Intellectual Skills, Cognitive Strategy, Attitude, Motor Skills), and nine events of instruction in “The conditions of Learning”, which remain foundations of instructional design practices.[5] Gagne’s work in learning hierarchies and hierarchical analysis led to an important notion in instruction – to ensure that learners acquire prerequisite skills before attempting superordinate’s ones.[5]

In 1967, after analyzing the failure of training material, Michael Scriven suggested the need for formative assessment – e.g., to try out instructional materials with learners (and revise accordingly) before declaring them finalized.[5]

1970s

During the 1970s, the number of instructional design models greatly increased and prospered in different sectors in military, academia, and industry.[5] Many instructional design theorists began to adopt an information-processing-based approach to the design of instruction. David Merrill for instance developed Component Display Theory (CDT), which concentrates on the means of presenting instructional materials (presentation techniques).[9]

1980s

Although interest in instructional design continued to be strong in business and the military, there was little evolution of ID in schools or higher education.[5][10] However, educators and researchers began to consider how the personal computer could be used in a learning environment or a learning space.[5][6][11] PLATO (Programmed Logic for Automatic Teaching Operation) is one example of how computers began to be integrated into instruction.[12] Many of the first uses of computers in the classroom were for "drill and skill" exercises.[13] There was a growing interest in how cognitive psychology could be applied to instructional design.[6]

1990s

The influence of constructivist theory on instructional design became more prominent in the 1990s as a counterpoint to the more traditional cognitive learning theory.[10][14] Constructivists believe that learning experiences should be "authentic" and produce real-world learning environments that allow the learner to construct their own knowledge.[10] This emphasis on the learner was a significant departure away from traditional forms of instructional design.[5][6][14]

Performance improvement was also seen as an important outcome of learning that needed to be considered during the design process.[5][11] The World Wide Web emerged as an online learning tool with hypertext and hypermedia being recognized as good tools for learning.[12] As technology advanced and constructivist theory gained popularity, technology’s use in the classroom began to evolve from mostly drill and skill exercises to more interactive activities that required more complex thinking on the part of the learner.[13] Rapid prototyping was first seen during the 1990s. In this process, an instructional design project is prototyped quickly and then vetted through a series of try and revise cycles. This is a big departure from traditional methods of instructional design that took far longer to complete.[10]

2000s

Online learning became common.[5][15][16][17] Technology advances permitted sophisticated simulations with authentic and realistic learning experiences.[13]

2010s

Academic degrees focused on integrating technology, internet, and human-computer interaction with education gained momentum with the introduction of Learning Design and Technology (LDT) majors. Universities such as Bowling Green State University,[18] Penn State,[19] Purdue,[20] San Diego State University,[21] Stanford,[22] and the University of Georgia[23] have established undergraduate and graduate degrees in technology-centered methods of designing and delivering education.

Instructional media history

Instructional Media History[5]
Era Media Characteristics Outcome
1900s Visual media School museum as supplementary material (First school museum opened in St. Louis in 1905) Materials are viewed as supplementary curriculum materials. District-wide media center is the modern equivalent.
1914-1923Visual media films, Slides, Photographer Visual Instruction Movement The effect of visual instruction was limited because of teacher resistance to change, quality of the file and cost etc.
Mid 1920s to 1930s Radio broadcasting, Sound recordings, Sound motion pictures Radio Audiovisual Instruction movement Education in large was not affected.
World War II Training films, Overhead projector, Slide projector, Audio equipment, Simulators and training devices Military and industry at this time had strong demand for training. Growth of audio-visual instruction movement in school was slow, but audiovisual device were used extensively in military services and industry.
Post World War II Communication medium Suggested to consider all aspects of a communication process (influenced by communication theories). This view point was first ignored, but eventually helped to expand the focus of the audiovisual movement.
1950s to mid-1960s Television Growth of Instructional television Instructional television was not adopted to a greater extent.
1950s-1990s Computer Computer-assisted instruction (CAI) research started in the 1950s, became popular in the 1980s a few years after computers became available to general public. The effect of CAI was rather small and the use of computer was far from innovative.
1990s-2000s Internet, Simulation The internet offered opportunities to train many people long distances. Desktop simulation gave advent to levels of Interactive Multimedia Instruction (IMI). Online training increased rapidly to the point where entire curriculums were given through web-based training. Simulations are valuable but expensive, with the highest level being used primarily by the military and medical community.
2000s-2010s Mobile Devices, Social MediaOn-demand training moved to people's personal devices; social media allowed for collaborative learning. The effect from both are too new to be measured.

Robert Gagné

Robert Gagné's work is widely used and cited in the design of instruction, as exemplified by more than 130 citations in prominent journals in the field during the period from 1985 through 1990.[24] Synthesizing ideas from behaviorism and cognitivism, he provided a clear template, which is easy to follow for designing instructional events. Instructional designers who follow Gagné's theory will likely have tightly focused, efficient instruction.[25]

Overview

Taxonomy

Robert Gagné classified the types of learning outcomes by asking how learning might be demonstrated.[26] His domains and outcomes of learning correspond to standard verbs.[27]

Verbal information - is stated: state, recite, tell, declare
Intellectual skills - label or classify the concepts
Intellectual skills - apply the rules and principles
Intellectual skills - problem solve by generating solutions or procedures
Discrimination: discriminate, distinguish, differentiate
Concrete Concept: identify, name, specify, label
Defined Concept: classify, categorize, type, sort (by definition)
Rule: demonstrate, show, solve (using one rule)
Higher order rule: generate, develop, solve (using two or more rules)
Cognitive strategies - are used for learning: adopt, create, originate
Attitudes - are demonstrated by preferring options: choose, prefer, elect, favor
Motor skills - enable physical performance: execute, perform, carry out

Nine events

According to Gagné, learning occurs in a series of learning events. Each of nine learning events are conditions for learning which must be accomplished before the next in order for learning to take place, termed . Similarly, instructional events should mirror the learning events:

  1. Gaining attention: To ensure reception of coming instruction, the teacher gives the learners a stimulus. Before the learners can start to process any new information, the instructor must gain the attention of the learners. This might entail using abrupt changes in the instruction.
  2. Informing learners of objectives: The teacher tells the learner what they will be able to do because of the instruction. The teacher communicates the desired outcome to the group.
  3. Stimulating recall of prior learning: The teacher asks for recall of existing relevant knowledge.
  4. Presenting the stimulus: The teacher gives emphasis to distinctive features.
  5. Providing learning guidance: The teacher helps the students in understanding (semantic encoding) by providing organization and relevance.
  6. Eliciting performance: The teacher asks the learners to respond, demonstrating learning.
  7. Providing feedback: The teacher gives informative feedback on the learners' performance.
  8. Assessing performance: The teacher requires more learner performance, and gives feedback, to reinforce learning.
  9. Enhancing retention and transfer: The teacher provides varied practice to generalize the capability.

Some educators believe that Gagné's taxonomy of learning outcomes and events of instruction oversimplify the learning process by over-prescribing.[28] However, using them as part of a complete instructional package can assist many educators in becoming more organized and staying focused on the instructional goals.[29]

Influence

Robert Gagné’s work has been the foundation of instructional design since the beginning of the 1960s when he conducted research and developed training materials for the military. Among the first to coin the term “instructional design”, Gagné developed some of the earliest instructional design models and ideas. These models have laid the groundwork for more present-day instructional design models from theorists like Dick, Carey, and Carey (The Dick and Carey Systems Approach Model),[30] Jerold Kemp’s Instructional Design Model,[31] and David Merrill (Merrill’s First Principle of Instruction).[31] Each of these models are based on a core set of learning phases that include (1) activation of prior experience, (2) demonstration of skills, (3) application of skills, and (4) integration or these skills into real world activities. The figure below illustrates these five ideas.[31]

Gagné's main focus for instructional design was how instruction and learning could be systematically connected to the design of instruction. He emphasized the design principles and procedures that need to take place for effective teaching and learning. His initial ideas, along with the ideas of other early instructional designers were outlined in Psychological Principles in Systematic Development, written by Roberts B. Miller and edited by Gagné.[32] Gagné believed in internal learning and motivation which paved the way for theorists like Merrill, Li, and Jones who designed the Instructional Transaction Theory,[33] Reigeluth and Stein’s Elaboration Theory,[34] and most notably, Keller’s ARCS Model of Motivation and Design.

Prior to Robert Gagné, learning was often thought of as a single, uniform process.[35] There was little or no distinction made between “learning to load a rifle and learning to solve a complex mathematical problem”.[35] Gagné offered an alternative view which developed the idea that different learners required different learning strategies.[35] Understanding and designing instruction based on a learning style defined by the individual brought about new theories and approaches to teaching.[35] Gagné 's understanding and theories of human learning added significantly to understanding the stages in cognitive processing and instructions.[35] For example, Gagné argued that instructional designers must understand the characteristics and functions of short-term and long-term memory to facilitate meaningful learning.[35] This idea encouraged instructional designers to include cognitive needs as a top-down instructional approach.[35]

Gagné (1966) defines curriculum as a sequence of content units arranged in such a way that the learning of each unit may be accomplished as a single act, provided the capabilities described by specified prior units (in the sequence) have already been mastered by the learner.[36]

His definition of curriculum has been the basis of many important initiatives in schools and other educational environments.[36] In the late 1950s and early 1960s, Gagné had expressed and established an interest in applying theory to practice with particular interest in applications for teaching, training and learning. Increasing the effectiveness and efficiency of practice was of particular concern.[36] His ongoing attention to practice while developing theory continues to influence education and training.[36]

Gagné's work has had a significant influence on American education, and military and industrial training.[37] Gagné was one of the early developers of the concept of instructional systems design which suggests the components of a lesson can be analyzed and should be designed to operate together as an integrated plan for instruction.[37] In "Educational Technology and the Learning Process" (Educational Researcher, 1974), Gagné defined instruction as "the set of planned external events which influence the process of learning and thus promote learning.".[37]

Learning design

The concept of learning design arrived in the literature of technology for education in the late 1990s and early 2000s[38] with the idea that "designers and instructors need to choose for themselves the best mixture of behaviourist and constructivist learning experiences for their online courses".[39] But the concept of learning design is probably as old as the concept of teaching. Learning design might be defined as "the description of the teaching-learning process that takes place in a unit of learning (e.g., a course, a lesson or any other designed learning event)".[40]

As summarized by Britain,[41] learning design may be associated with:

Models

ADDIE process

Perhaps the most common model used for creating instructional materials is the ADDIE Model. This acronym stands for the 5 phases contained in the model (Analyze, Design, Develop, Implement, and Evaluate).

Brief History of ADDIE’s Development – The ADDIE model was initially developed by Florida State University to explain “the processes involved in the formulation of an instructional systems development (ISD) program for military interservice training that will adequately train individuals to do a particular job and which can also be applied to any interservice curriculum development activity.”[43] The model originally contained several steps under its five original phases (Analyze, Design, Develop, Implement, and [Evaluation and] Control),[43] whose completion was expected before movement to the next phase could occur. Over the years, the steps were revised and eventually the model itself became more dynamic and interactive than its original hierarchical rendition, until its most popular version appeared in the mid-80s, as we understand it today.

The five phases are listed and explained below:[5]

ADDIE Model

Analyze – The first phase of content development is Analysis. Analysis refers to the gathering of information about one’s audience, the tasks to be completed, how the learners will view the content, and the project’s overall goals. The instructional designer then classifies the information to make the content more applicable and successful.

Design – The second phase is the Design phase. In this phase, instructional designers begin to create their project. Information gathered from the analysis phase, in conjunction with the theories and models of instructional design, is meant to explain how the learning will be acquired. For example, the design phase begins with writing a learning objective. Tasks are then identified and broken down to be more manageable for the designer. The final step determines the kind of activities required for the audience in order to meet the goals identified in the Analyze phase.

Develop – The third phase, Development, involves the creation of the activities that will be implemented. It is in this stage that the blueprints of the design phase are assembled.

Implement – After the content is developed, it is then Implemented. This stage allows the instructional designer to test all materials to determine if they are functional and appropriate for the intended audience.

Evaluate – The final phase, Evaluate, ensures the materials achieved the desired goals. The evaluation phase consists of two parts: formative and summative assessment. The ADDIE model is an iterative process of instructional design, which means that at each stage the designer can assess the project's elements and revise them if necessary. This process incorporates formative assessment, while the summative assessments contain tests or evaluations created for the content being implemented. This final phase is vital for the instructional design team because it provides data used to alter and enhance the design.

Connecting all phases of the model are external and reciprocal revision opportunities. As in the internal Evaluation phase, revisions should and can be made throughout the entire process.

Most of the current instructional design models are variations of the ADDIE process.[44]

Rapid prototyping

An adaptation of the ADDIE model, which is used sometimes, is a practice known as rapid prototyping.

Proponents suggest that through an iterative process the verification of the design documents saves time and money by catching problems while they are still easy to fix. This approach is not novel to the design of instruction, but appears in many design-related domains including software design, architecture, transportation planning, product development, message design, user experience design, etc.[44][45][46] In fact, some proponents of design prototyping assert that a sophisticated understanding of a problem is incomplete without creating and evaluating some type of prototype, regardless of the analysis rigor that may have been applied up front.[47] In other words, up-front analysis is rarely sufficient to allow one to confidently select an instructional model. For this reason many traditional methods of instructional design are beginning to be seen as incomplete, naive, and even counter-productive.[48]

However, some consider rapid prototyping to be a somewhat simplistic type of model. As this argument goes, at the heart of Instructional Design is the analysis phase. After you thoroughly conduct the analysis—you can then choose a model based on your findings. That is the area where most people get snagged—they simply do not do a thorough-enough analysis. (Part of Article By Chris Bressi on LinkedIn)

Dick and Carey

Another well-known instructional design model is The Dick and Carey Systems Approach Model.[49] The model was originally published in 1978 by Walter Dick and Lou Carey in their book entitled The Systematic Design of Instruction.


Dick and Carey made a significant contribution to the instructional design field by championing a systems view of instruction, in contrast to defining instruction as the sum of isolated parts. The model addresses instruction as an entire system, focusing on the interrelationship between context, content, learning and instruction.[50] According to Dick and Carey, "Components such as the instructor, learners, materials, instructional activities, delivery system, and learning and performance environments interact with each other and work together to bring about the desired student learning outcomes".[49] The components of the Systems Approach Model, also known as the Dick and Carey Model, are as follows:

With this model, components are executed iteratively and in parallel, rather than linearly.[49]

Guaranteed Learning

The instructional design model, Guaranteed Learning, was formerly known as the Instructional Development Learning System (IDLS).[51] The model was originally published in 1970 by Peter J. Esseff, PhD and Mary Sullivan Esseff, PhD in their book entitled IDLS—Pro Trainer 1: How to Design, Develop, and Validate Instructional Materials.[52]

Peter (1968) & Mary (1972) Esseff both received their doctorates in Educational Technology from the Catholic University of America under the mentorship of Dr. Gabriel Ofiesh, a founding father of the Military Model mentioned above. Esseff and Esseff synthesized existing theories to develop their approach to systematic design, "Guaranteed Learning" aka "Instructional Development Learning System" (IDLS). In 2015, the Drs. Esseffs created an eLearning course to enable participants to take the GL course online under the direction of Dr. Esseff.

The components of the Guaranteed Learning Model are the following:

Other

Other useful instructional design models include: the Smith/Ragan Model,[53] the Morrison/Ross/Kemp Model[54] and the OAR Model of instructional design in higher education,[55] as well as, Wiggins' theory of backward design.

Learning theories also play an important role in the design of instructional materials. Theories such as behaviorism, constructivism, social learning and cognitivism help shape and define the outcome of instructional materials.

Also see: Managing Learning in High Performance Organizations, by Ruth Stiehl and Barbara Bessey, from The Learning Organization, Corvallis, Oregon. ISBN 0-9637457-0-0.

Motivational design

Motivation is defined as an internal drive that activates behavior and gives it direction. The term motivation theory is concerned with the process that describe why and how human behavior is activated and directed.

Motivation concepts

Intrinsic and Extrinsic Motivation

Examples: Writing short stories because you enjoy writing them, reading a book because you are curious about the topic, and playing chess because you enjoy effortful thinking
Examples: The writer who only writes poems to be submitted to poetry contests, a person who dislikes sales but accepts a sales position because he/she desires to earn an above average salary, and a person selecting a major in college based on salary and prestige, rather than personal interest.

John Keller[58] has devoted his career to researching and understanding motivation in instructional systems. These decades of work constitute a major contribution to the instructional design field. First, by applying motivation theories systematically to design theory. Second, in developing a unique problem-solving process he calls the ARCS Motivation.

ARCS

The ARCS Model of Motivational Design was created by John Keller while he was researching ways to supplement the learning process with motivation. The model is based on Tolman's and Lewin's expectancy-value theory, which presumes that people are motivated to learn if there is value in the knowledge presented (i.e. it fulfills personal needs) and if there is an optimistic expectation for success.[59] The model consists of four main areas: Attention, Relevance, Confidence, and Satisfaction.

Attention and relevance according to John Keller's ARCS motivational theory are essential to learning. The first 2 of 4 key components for motivating learners, attention and relevance can be considered the backbone of the ARCS theory, the latter components relying upon the former.

Attention

The attention mentioned in this theory refers to the interest displayed by learners in taking in the concepts/ideas being taught. This component is split into three categories: perceptual arousal, using surprise or uncertain situations; inquiry arousal, offering challenging questions and/or problems to answer/solve; and variability, using a variety of resources and methods of teaching. Within each of these categories, John Keller has provided further sub-divisions of types of stimuli to grab attention. Grabbing attention is the most important part of the model because it initiates the motivation for the learners. Once learners are interested in a topic, they are willing to invest their time, pay attention, and find out more.

Relevance

Relevance, according to Keller, must be established by using language and examples that the learners are familiar with. The three major strategies Keller presents are goal-oriented, motive matching, and familiarity. Like the Attention category, Keller divided the three major strategies into subcategories, which provide examples of how to make a lesson plan relevant to the learner. Learners will throw concepts to the wayside if their attention cannot be grabbed and sustained and if relevance is not conveyed.

Confidence

The confidence aspect of the ARCS model focuses on establishing positive expectations for achieving success among learners. The confidence level of learners is often correlated with motivation and the amount of effort put forth in reaching a performance objective. For this reason, it's important that learning design provides students with a method for estimating their probability of success. This can be achieved in the form of a syllabus and grading policy, rubrics, or a time estimate to complete tasks. Additionally, confidence is built when positive reinforcement for personal achievements is given through timely, relevant feedback.

Satisfaction

Finally, learners must obtain some type of satisfaction or reward from a learning experience. This satisfaction can be from a sense of achievement, praise from a higher-up, or mere entertainment. Feedback and reinforcement are important elements and when learners appreciate the results, they will be motivated to learn. Satisfaction is based upon motivation, which can be intrinsic or extrinsic. To keep learners satisfied, instruction should be designed to allow them to use their newly learned skills as soon as possible in as authentic a setting as possible.

Summary of ARCS Model

Motivating opportunities

Although Keller's ARCS model currently dominates instructional design with respect to learner motivation, in 2006 Hardré and Miller[60] proposed a need for a new design model that includes current research in human motivation, a comprehensive treatment of motivation, integrates various fields of psychology and provides designers the flexibility to be applied to a myriad of situations.

Hardré[61] proposes an alternate model for designers called the Motivating Opportunities Model or MOM. Hardré's model incorporates cognitive, needs, and affective theories as well as social elements of learning to address learner motivation. MOM has seven key components spelling the acronym 'SUCCESS' – Situational, Utilization, Competence, Content, Emotional, Social, and Systemic.[61]

Influential researchers and theorists

Alphabetic by last name

See also

References

  1. Merrill, M. D.; Drake, L.; Lacy, M. J.; Pratt, J. (1996). "Reclaiming instructional design" (PDF). Educational Technology. 36 (5): 5–7.
  2. Mayer, Richard E (1992). "Cognition and instruction: Their historic meeting within educational psychology". Journal of Educational Psychology. 84 (4): 405–412. doi:10.1037/0022-0663.84.4.405.
  3. Duffy, T. M., & Cunningham, D. J. (1996). Constructivism: Implications for the design and delivery of instruction. In D. Jonassen (Ed.), Handbook of Research for Educational Communications and Technology (pp. 170-198). New York: Simon & Schuster Macmillan
  4. Duffy, T. M. , & Jonassen, D. H. (1992). Constructivism: New implications for instructional technology. In T. Duffy & D. Jonassen (Eds.), Constructivism and the technology of instruction (pp. 1-16). Hillsdale, NJ: Erlbaum.
  5. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Reiser, R. A., & Dempsey, J. V. (2012). Trends and issues in instructional design and technology. Boston: Pearson.
  6. 1 2 3 4 5 Clark, B. (2009). The history of instructional design and technology.
  7. Thalheimer, Will. People remember 10%, 20%...Oh Really? October 8, 2006.
  8. Bloom's Taxonomy. Retrieved from Wikipedia on April 18, 2012 at Bloom's Taxonomy
  9. Instructional Design Theories. Instructionaldesign.org. Retrieved on 2011-10-07.
  10. 1 2 3 4 Reiser, R. A. (2001). "A History of Instructional Design and Technology: Part II: A History of Instructional Design". ETR&D, Vol. 49, No. 2, 2001, pp. 57–67.
  11. 1 2 History of instructional media. Uploaded to YouTube by crozitis on Jan 17, 2010. Retrieved from https://www.youtube.com/watch?v=y-fKcf4GuOU
  12. 1 2 A hypertext history of instructional design. Retrieved April 11, 2012
  13. 1 2 3 Markham, R. "History of instructional design". Retrieved on April 11, 2012
  14. 1 2 History and timeline of instructional design. Retrieved April 11, 2012
  15. Braine, B., (2010). "Historical Evolution of Instructional Design & Technology". Retrieved on April 11, 2012 from http://timerime.com/en/timeline/415929/Historical+Evolution+of+Instructional+Design++Technology/
  16. Webbees. "Xterior - Windschermen, Windschermen". www.xterior-windschermen.nl. Retrieved 2016-11-05.
  17. Trentin G. (2001). Designing Online Courses. In C.D. Maddux & D. LaMont Johnson (Eds) The Web in Higher Education: Assessing the Impact and Fulfilling the Potential, pp. 47-66, The Haworth Press Inc., New York, London, Oxford, ISBN 0-7890-1706-7.
  18. http://www.bgsu.edu/technology-architecture-and-applied-engineering/departments-and-programs/visual-communication-and-technology-education/learning-design-and-technology.html BGSU LDT
  19. http://ed.psu.edu/lps/ldt Penn State LDT
  20. http://online.purdue.edu/ldt/learning-design-technology Purdue LDT
  21. http://jms.sdsu.edu/index.php/admissions/ldt_admissions_requirements SDSU LDT
  22. https://ed.stanford.edu/academics/masters-handbook/program-requirements/ldt Stanford LDT
  23. https://coe.uga.edu/academics/degrees/med/learning-design-technology UGA LDT
  24. Anglin, G. J., & Towers, R. L. (1992). Reference citations in selected instructional design and technology journals, 1985-1990. Educational Technology Research and Development, 40, 40-46.
  25. Perry, J. D. (2001). Learning and cognition. [On-Line]. Available: http://education.indiana.edu/~p540/webcourse/gagne.html
  26. Gagné, R. M. (1985). The conditions of learning (4th ed.). New York: Holt, Rinehart & Winston.
  27. Gagné, R. M., & Driscoll, M. P. (1988). Essentials of learning for instruction. Englewood Cliffs, NJ: Prentice-Hall.
  28. Haines, D. (1996). Gagné. [On-Line]. Available: http://education.indiana.edu/~educp540/haines1.html
  29. Dowling, L. J. (2001). Robert Gagné and the Conditions of Learning. Walden University.
  30. Dick, W., & Carey, L. (1996). The systematic design of instruction. 4th ed. New York, NY: Harper Collin
  31. 1 2 3 Instructional Design Models and Theories, Retrieved April 9th 2012 from http://www.instructionaldesigncentral.com/htm/IDC_instructionaldesignmodels.htm#kemp
  32. Psychological Principles in System Development-1962. Retrieved on April 15, 2012 from http://www.nwlink.com/~donclark/history_isd/gagne.html
  33. Merrill, D.M., Jones, M.K., & Chongqing, L. (December 1990). Instructional Transaction Theory. Retrieved from http://www.speakeasydesigns.com/SDSU/student/SAGE/compsprep/ITT_Intro.pdf
  34. Elaboration Theory (Charles Reigeluth), Retrieved April 9, 2012 from http://www.instructionaldesign.org/theories/elaboration-theory.html
  35. 1 2 3 4 5 6 7 Wiburg, K. M. (2003). [Web log message]. Retrieved from http://www.internettime.com/itimegroup/Is it Time to Exchange Skinner's Teaching Machine for Dewey's.htm
  36. 1 2 3 4 Richey, R. C. (2000). The legacy of Robert M.Gagné . Syracuse, NY: ERIC Clearinghouse on Information & Technology.
  37. 1 2 3 Gagné, R.M. (n.d.). Biographies. Retrieved April 18, 2012, from Answers.com Web site: http://www.answers.com/topic/robert-mills-gagn
  38. Conole G., and Fill K., "A learning design toolkit to create pedagogically effective learning activities". Journal of Interactive Media in Education, 2005 (08).
  39. Carr-Chellman A. and Duchastel P., "The ideal online course," British Journal of Educational Technology, 31(3), 229–241, July 2000.
  40. Koper R., "Current Research in Learning Design," Educational Technology & Society, 9 (1), 13–22, 2006.
  41. Britain S., "A Review of Learning Design: Concept, Specifications and Tools" A report for the JISC E-learning Pedagogy Programme, May 2004.
  42. IMS Learning Design webpage. Imsglobal.org. Retrieved on 2011-10-07.
  43. 1 2 Branson, R. K., Rayner, G. T., Cox, J. L., Furman, J. P., King, F. J., Hannum, W. H. (1975). Interservice procedures for instructional systems development. (5 vols.) (TRADOC Pam 350-30 NAVEDTRA 106A). Ft. Monroe, VA: U.S. Army Training and Doctrine Command, August 1975. (NTIS No. ADA 019 486 through ADA 019 490).
  44. 1 2 Piskurich, G.M. (2006). Rapid Instructional Design: Learning ID fast and right.
  45. Saettler, P. (1990). The evolution of American educational technology.
  46. Stolovitch, H.D., & Keeps, E. (1999). Handbook of human performance technology.
  47. Kelley, T., & Littman, J. (2005). The ten faces of innovation: IDEO's strategies for beating the devil's advocate & driving creativity throughout your organization. New York: Doubleday.
  48. Hokanson, B., & Miller, C. (2009). Role-based design: A contemporary framework for innovation and creativity in instructional design. Educational Technology, 49(2), 21–28.
  49. 1 2 3 Dick, Walter, Lou Carey, and James O. Carey (2005) [1978]. The Systematic Design of Instruction (6th ed.). Allyn & Bacon. pp. 1–12. ISBN 0-205-41274-2.
  50. Ed Forest. "Dick and Carey Instructional Model".
  51. Esseff, Peter J.; Esseff, Mary Sullivan (1998) [1970]. Instructional Development Learning System (IDLS) (8th ed.). ESF Press. pp. 1–12. ISBN 1-58283-037-1.
  52. ESF, Inc. – Train-the-Trainer – ESF ProTrainer Materials – 813.814.1192. ESF-ProTrainer.com (2007-11-06). Retrieved on 2011-10-07.
  53. Smith, P. L. & Ragan, T. J. (2004). Instructional design (3rd Ed.). Danvers, MA: John Wiley & Sons.
  54. Morrison, G. R., Ross, S. M., & Kemp, J. E. (2001). Designing effective instruction, 3rd ed. New York: John Wiley.
  55. Joeckel, G., Jeon, T., Gardner, J. (2010). Instructional Challenges In Higher Education: Online Courses Delivered Through A Learning Management System By Subject Matter Experts. In Song, H. (Ed.) Distance Learning Technology, Current Instruction, and the Future of Education: Applications of Today, Practices of Tomorrow. (link to article)
  56. R. Ryan; E. Deci. "Intrinsic and Extrinsic Motivations". Contemporary Educational Psychology. Retrieved April 1, 2012.
  57. Brad Bell. "Intrinsic Motivation and Extrinsic Motivation with Examples of Each Types of Motivation". Blue Fox Communications. Retrieved April 1, 2012.
  58. Keller, John. "arcsmodel.com". John M. Keller. Retrieved April 1, 2012.
  59. Ely, Donald (1983). Development and Use of the ARCS Model of Motivational Design. Libraries Unlimited. pp. 225–245.
  60. Hardré, Patricia; Miller, Raymond B. (2006). "Toward a current, comprehensive, integrative, and flexible model of motivation for instructional design". Performance Improvement Quarterly. 19 (3).
  61. 1 2 Hardré, Patricia (2009). "The motivating opportunities model for Performance SUCCESS: Design, Development, and Instructional Implications". Performance Improvement Quarterly. 22 (1). doi:10.1002/piq.20043.

External links

Wikiversity has learning materials about Instructional design
This article is issued from Wikipedia - version of the 12/1/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.