Manycore processor

Manycore processors are specialist multi-core processors designed for a high degree of parallel processing, containing a large number of simpler, independent processor cores (e.g. 10s, 100s, or 1,000s). Manycore processors are used extensively in embedded computers and high-performance computing. As of July 2016, the world's fastest supercomputer (as ranked by the TOP500 list), the Chinese Sunway TaihuLight, obtains its performance from 40,960 260-core SW26010 manycore processors.

Contrast with multicore architecture

They are distinct from multi-core processors in that: they are optimised from the outset for a higher degree of explicit parallelism, and for higher throughput (or lower power consumption) at the expense of latency and lower single thread performance.

The broader category of multi-core processors, by contrast are usually designed to efficiently run both parallel and serial code, and therefore place more emphasis on high single thread performance (e.g. devoting more silicon to out of order execution, deeper pipelines, more superscalar execution units, and larger, more general caches), and shared memory. These techniques devote runtime resources toward figuring out implicit parallelism in a single thread. They are used in systems where they have evolved continuously (with backward compatibility) from single core processors. They usually have a 'few' cores (e.g. 2,4,8), and may be complemented by a manycore accelerator (such as a GPU) in a heterogeneous system.

Motivation

Cache coherency is an issue limiting the scaling of multicore processors. Manycore processors may bypass this with tricks such as message passing,[1] scratchpad memory, DMA,[2] partitioned global address space,[3] or read-only/non-coherent caches. A manycore processor using a network on a chip and local memories gives software the opportunity to explicitly optimise the spatial layout of tasks (e.g. as seen in tooling developed for TrueNorth).[4]

Manycore processors may have more in common (conceptually) with technologies originating in high performance computing such as clusters and vector processors.[5]

GPUs may be considered a form of manycore processor having multiple shader processing units, and only being suitable for highly parallel code (high throughput, but extremely poor single thread performance).

Suitable programming models

Examples

See also

References

  1. Mattson, Tim (January 2010). "The Future of Many Core Computing: A tale of two processors" (PDF).
  2. Hendry, Gilbert; Kretschmann, Mark. "IBM Cell Processor" (PDF).
  3. Olofsson, Andreas; Nordström, Tomas; Ul-Abdin, Zain (2014). "Kickstarting High-performance Energy-efficient Manycore Architectures with Epiphany". arXiv:1412.5538Freely accessible [cs.AR].
  4. Amir, Arnon (June 11, 2015). "IBM SyNAPSE Deep Dive Part 3". IBM Research.
  5. "cell architecture"."The Cell architecture is like nothing we have ever seen in commodity microprocessors, it is closer in design to multiprocessor vector supercomputers"
This article is issued from Wikipedia - version of the 12/4/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.