Pelee Island Airport
Pelee Island Airport | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
IATA: none – ICAO: CYPT | |||||||||||||||
Summary | |||||||||||||||
Airport type | Public | ||||||||||||||
Operator | Township of Pelee | ||||||||||||||
Serves | Pelee, Ontario | ||||||||||||||
Location | Pelee, Ontario | ||||||||||||||
Time zone | EST (UTC−05:00) | ||||||||||||||
• Summer (DST) | EDT (UTC−04:00) | ||||||||||||||
Elevation AMSL | 572 ft / 174 m | ||||||||||||||
Coordinates | 41°46′39″N 082°40′41″W / 41.77750°N 82.67806°WCoordinates: 41°46′39″N 082°40′41″W / 41.77750°N 82.67806°W | ||||||||||||||
Map | |||||||||||||||
![]() ![]() CYPT Location in Ontario | |||||||||||||||
Runways | |||||||||||||||
| |||||||||||||||
Source: Canada Flight Supplement[1] |
Pelee Island Airport (ICAO: CYPT) is located adjacent to the west side of Pelee, Ontario Canada. Approximately 5,500 passengers passed through Pelee Island Airport in 2009.[2]
The airport is classified as an airport of entry by Nav Canada and is staffed by the Canada Border Services Agency (CBSA). CBSA officers at this airport can handle general aviation aircraft only, with no more than 15 passengers.[1] The airport mainly handles propeller aircraft only with focus on private general aviation and regularly scheduled flights.[3]
Terminal
A single storey yellow house serves as the terminal building and Canada Border Services Agency office. There are 3 other buildings around the small tarmac.
Airlines and destinations
Passenger
Airlines | Destinations |
---|---|
Griffing Flying Service | Port Clinton |
Pelee Island Transportation Company | Seasonal: Windsor |
References
- 1 2 Canada Flight Supplement. Effective 0901Z 15 September 2016 to 0901Z 10 November 2016
- ↑ Pelee Island Transportation Needs Study
- ↑ Places to Fly at the Canadian Owners and Pilots Association
This article is issued from Wikipedia - version of the 12/4/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.