Ratio

For non-dimensionless ratios, see Rates.
For other uses, see Ratio (disambiguation).
"is to" redirects here. For the grammatical construction, see am to.
The ratio of width to height of standard-definition television.

In mathematics, a ratio is a relationship between two numbers indicating how many times the first number contains the second.[1] For example, if a bowl of fruit contains eight oranges and six lemons, then the ratio of oranges to lemons is eight to six (that is, 8:6, which is equivalent to the ratio 4:3). Thus, a ratio can be a fraction as opposed to a whole number. Also, in this example the ratio of lemons to oranges is 6:8 (or 3:4), and the ratio of oranges to the total amount of fruit is 8:14 (or 4:7).

The numbers compared in a ratio can be any quantities of a comparable kind, such as objects, persons, lengths, or spoonfuls. A ratio is written "a to b" or a:b, or sometimes expressed arithmetically as a quotient of the two.[2] When the two quantities have the same units, as is often the case, their ratio is a dimensionless number. A rate is a quotient of variables having different units. But in many applications, the word ratio is often used instead for this more general notion as well.[3]

Notation and terminology

The ratio of numbers A and B can be expressed as:[4]

The numbers A and B are sometimes called terms with A being the antecedent and B being the consequent.[6]

The proportion expressing the equality of the ratios A:B and C:D is written A:B = C:D or A:B::C:D. This latter form, when spoken or written in the English language, is often expressed as

A is to B as C is to D.

A, B, C and D are called the terms of the proportion. A and D are called the extremes, and B and C are called the means. The equality of three or more proportions is called a continued proportion.[7]

Ratios are sometimes used with three or more terms. The ratio of the dimensions of a "two by four" that is ten inches long is 2:4:10. A good concrete mix is sometimes quoted as 1:2:4 for the ratio of cement to sand to gravel.[8]

For a mixture of 4/1 cement to water, it could be said that the ratio of cement to water is 4:1, that there is 4 times as much cement as water, or that there is a quarter (1/4) as much water as cement.

History and etymology

It is impossible to trace the origin of the concept of ratio, because the ideas from which it developed would have been familiar to preliterate cultures. For example, the idea of one village being twice as large as another is so basic that it would have been understood in prehistoric society.[9] However, it is possible to trace the origin of the word "ratio" to the Ancient Greek λόγος (logos). Early translators rendered this into Latin as ratio ("reason"; as in the word "rational"). (A rational number may be expressed as the quotient of two integers.) A more modern interpretation of Euclid's meaning is more akin to computation or reckoning.[10] Medieval writers used the word ("proportion") to indicate ratio and proportionalitas ("proportionality") for the equality of ratios.[11]

Euclid collected the results appearing in the Elements from earlier sources. The Pythagoreans developed a theory of ratio and proportion as applied to numbers.[12] The Pythagoreans' conception of number included only what would today be called rational numbers, casting doubt on the validity of the theory in geometry where, as the Pythagoreans also discovered, incommensurable ratios (corresponding to irrational numbers) exist. The discovery of a theory of ratios that does not assume commensurability is probably due to Eudoxus of Cnidus. The exposition of the theory of proportions that appears in Book VII of The Elements reflects the earlier theory of ratios of commensurables.[13]

The existence of multiple theories seems unnecessarily complex to modern sensibility since ratios are, to a large extent, identified with quotients. This is a comparatively recent development however, as can be seen from the fact that modern geometry textbooks still use distinct terminology and notation for ratios and quotients. The reasons for this are twofold. First, there was the previously mentioned reluctance to accept irrational numbers as true numbers. Second, the lack of a widely used symbolism to replace the already established terminology of ratios delayed the full acceptance of fractions as alternative until the 16th century.[14]

Euclid's definitions

Book V of Euclid's Elements has 18 definitions, all of which relate to ratios.[15] In addition, Euclid uses ideas that were in such common usage that he did not include definitions for them. The first two definitions say that a part of a quantity is another quantity that "measures" it and conversely, a multiple of a quantity is another quantity that it measures. In modern terminology, this means that a multiple of a quantity is that quantity multiplied by an integer greater than one—and a part of a quantity (meaning aliquot part) is a part that, when multiplied by an integer greater than one, gives the quantity.

Euclid does not define the term "measure" as used here, However, one may infer that if a quantity is taken as a unit of measurement, and a second quantity is given as an integral number of these units, then the first quantity measures the second. Note that these definitions are repeated, nearly word for word, as definitions 3 and 5 in book VII.

Definition 3 describes what a ratio is in a general way. It is not rigorous in a mathematical sense and some have ascribed it to Euclid's editors rather than Euclid himself.[16] Euclid defines a ratio as between two quantities of the same type, so by this definition the ratios of two lengths or of two areas are defined, but not the ratio of a length and an area. Definition 4 makes this more rigorous. It states that a ratio of two quantities exists when there is a multiple of each that exceeds the other. In modern notation, a ratio exists between quantities p and q if there exist integers m and n so that mp>q and nq>p. This condition is known as the Archimedes property.

Definition 5 is the most complex and difficult. It defines what it means for two ratios to be equal. Today, this can be done by simply stating that ratios are equal when the quotients of the terms are equal, but Euclid did not accept the existence of the quotients of incommensurate, so such a definition would have been meaningless to him. Thus, a more subtle definition is needed where quantities involved are not measured directly to one another. Though it may not be possible to assign a rational value to a ratio, it is possible to compare a ratio with a rational number. Specifically, given two quantities, p and q, and a rational number m/n we can say that the ratio of p to q is less than, equal to, or greater than m/n when np is less than, equal to, or greater than mq respectively. Euclid's definition of equality can be stated as that two ratios are equal when they behave identically with respect to being less than, equal to, or greater than any rational number. In modern notation this says that given quantities p, q, r and s, then p:q::r:s if for any positive integers m and n, np<mq, np=mq, np>mq according as nr<ms, nr=ms, nr>ms respectively. There is a remarkable similarity between this definition and the theory of Dedekind cuts used in the modern definition of irrational numbers.[17]

Definition 6 says that quantities that have the same ratio are proportional or in proportion. Euclid uses the Greek ἀναλόγον (analogon), this has the same root as λόγος and is related to the English word "analog".

Definition 7 defines what it means for one ratio to be less than or greater than another and is based on the ideas present in definition 5. In modern notation it says that given quantities p, q, r and s, then p:q>r:s if there are positive integers m and n so that np>mq and nrms.

As with definition 3, definition 8 is regarded by some as being a later insertion by Euclid's editors. It defines three terms p, q and r to be in proportion when p:q::q:r. This is extended to 4 terms p, q, r and s as p:q::q:r::r:s, and so on. Sequences that have the property that the ratios of consecutive terms are equal are called geometric progressions. Definitions 9 and 10 apply this, saying that if p, q and r are in proportion then p:r is the duplicate ratio of p:q and if p, q, r and s are in proportion then p:s is the triplicate ratio of p:q. If p, q and r are in proportion then q is called a mean proportional to (or the geometric mean of) p and r. Similarly, if p, q, r and s are in proportion then q and r are called two mean proportionals to p and s.

Number of terms and use of fractions

In general, a comparison of the quantities of a two-entity ratio can be expressed as a fraction derived from the ratio. For example, in a ratio of 2:3, the amount, size, volume, or quantity of the first entity is that of the second entity.

If there are 2 oranges and 3 apples, the ratio of oranges to apples is 2:3, and the ratio of oranges to the total number of pieces of fruit is 2:5. These ratios can also be expressed in fraction form: there are 2/3 as many oranges as apples, and 2/5 of the pieces of fruit are oranges. If orange juice concentrate is to be diluted with water in the ratio 1:4, then one part of concentrate is mixed with four parts of water, giving five parts total; the amount of orange juice concentrate is 1/4 the amount of water, while the amount of orange juice concentrate is 1/5 of the total liquid. In both ratios and fractions, it is important to be clear what is being compared to what, and beginners often make mistakes for this reason.

Fractions can also be inferred from ratios with more than two entities; however, a ratio with more than two entities cannot be completely converted into a single fraction, because a fraction can only compare two quantities. A separate fraction can be used to compare the quantities of any two of the entities covered by the ratio: for example, from a ratio of 2:3:7 we can infer that the quantity of the second entity is that of the third entity.

Proportions and percentage ratios

If we multiply all quantities involved in a ratio by the same number, the ratio remains valid. For example, a ratio of 3:2 is the same as 12:8. It is usual either to reduce terms to the lowest common denominator, or to express them in parts per hundred (percent).

If a mixture contains substances A, B, C and D in the ratio 5:9:4:2 then there are 5 parts of A for every 9 parts of B, 4 parts of C and 2 parts of D. As 5+9+4+2=20, the total mixture contains 5/20 of A (5 parts out of 20), 9/20 of B, 4/20 of C, and 2/20 of D. If we divide all numbers by the total and multiply by 100%, we have converted to percentages: 25% A, 45% B, 20% C, and 10% D (equivalent to writing the ratio as 25:45:20:10).

If the two or more ratio quantities encompass all of the quantities in a particular situation, it is said that "the whole" contains the sum of the parts: for example, a fruit basket containing two apples and three oranges and no other fruit is made up of two parts apples and three parts oranges. In this case, , or 40% of the whole is apples and , or 60% of the whole is oranges. This comparison of a specific quantity to "the whole" is called a proportion.

If the ratio consists of only two values, it can be represented as a fraction, in particular as a decimal fraction. For example, older televisions have a 4:3 aspect ratio, which means that the width is 4/3 of the height (this can also be expressed as 1.33:1 or just 1.33 rounded to two decimal places). Modern widescreen TVs have a 16:9 aspect ratio, or 1.78 rounded to two decimal places. One of the popular widescreen movie formats is 2.35:1 or simply 2.35. Representing ratios as decimal fractions simplifies their comparison. When comparing 1.33, 1.78 and 2.35, it is obvious which format offers wider image. Such a comparison works only when values being compared are consistent, like always expressing width in relation to height.

Reduction

Ratios can be reduced (as fractions are) by dividing each quantity by the common factors of all the quantities. As for fractions, the simplest form is considered that in which the numbers in the ratio are the smallest possible integers.

Thus, the ratio 40:60 is equivalent in meaning to the ratio 2:3, the latter being obtained from the former by dividing both quantities by 20. Mathematically, we write 40:60 = 2:3, or equivalently 40:60::2:3. The verbal equivalent is "40 is to 60 as 2 is to 3."

A ratio that has integers for both quantities and that cannot be reduced any further (using integers) is said to be in simplest form or lowest terms.

Sometimes it is useful to write a ratio in the form 1:x or x:1, where x is not necessarily an integer, to enable comparisons of different ratios. For example, the ratio 4:5 can be written as 1:1.25 (dividing both sides by 4) Alternatively, it can be written as 0.8:1 (dividing both sides by 5).

Where the context makes the meaning clear, a ratio in this form is sometimes written without the 1 and the colon, though, mathematically, this makes it a factor or multiplier.

Irrational ratios

Some ratios are between incommensurable quantities (quantities whose ratio is an irrational number). The earliest discovered example, found by the Pythagoreans, is the ratio of the diagonal to the side of a square, which is the square root of 2.

The ratio of a circle's circumference to its diameter is called pi, and is not only irrational but also transcendental.

Another well-known example is the golden ratio, which is defined as both sides of the equality a:b = (a+b):a. Writing this in fractional terms as and finding the positive solution gives the golden ratio which is irrational. Thus at least one of a and b has to be irrational for them to be in the golden ratio. An example of an occurrence of the golden ratio is as the limiting value of the ratio of two successive Fibonacci numbers: even though the n-th such ratio is the ratio of two integers and hence is rational, the limit of the sequence of these ratios as n goes to infinity is the irrational golden ratio.

Similarly, the silver ratio is defined as both sides of the equality a:b = (2a+b):a. Again writing it in fractional terms and obtaining the positive solution, we obtain which is irrational, so of two quantities a and b in the silver ratio at least one of them must be irrational.

Odds

Main article: Odds

Odds (as in gambling) are expressed as a ratio. For example, odds of "7 to 3 against" (7:3) mean that there are seven chances that the event will not happen to every three chances that it will happen. The probability of success is 30%. In every ten trials, there are expected to be three wins and seven losses.

Units

Ratios may be unitless, as in the case they relate quantities in units of the same dimension, even if their units of measurement are initially different. For example, the ratio 1 minute : 40 seconds can be reduced by changing the first value to 60 seconds. Once the units are the same, they can be omitted, and the ratio can be reduced to 3:2.

On the other hand, there are non-dimensionless ratios, also known as rates.[18][19] In chemistry, mass concentration ratios are usually expressed as weight/volume fractions. For example, a concentration of 3% w/v usually means 3 g of substance in every 100 mL of solution. This cannot be converted to a dimensionless ratio, as in weight/weight or volume/volume fractions.

Triangular coordinates

The locations of points relative to a triangle with vertices A, B, and C and sides AB, BC, and CA are often expressed in extended ratio form as triangular coordinates.

In barycentric coordinates, a point with coordinates is the point upon which a weightless sheet of metal in the shape and size of the triangle would exactly balance if weights were put on the vertices, with the ratio of the weights at A and B being the ratio of the weights at B and C being and therefore the ratio of weights at A and C being

In trilinear coordinates, a point with coordinates x:y:z has perpendicular distances to side BC (across from vertex A) and side CA (across from vertex B) in the ratio x:y, distances to side CA and side AB (across from C) in the ratio y:z, and therefore distances to sides BC and AB in the ratio x:z.

Since all information is expressed in terms of ratios (the individual numbers denoted by x, y, and z have no meaning by themselves), a triangle analysis using barycentric or trilinear coordinates applies regardless of the size of the triangle.

See also

References

  1. Penny Cyclopedia, p. 307
  2. New International Encyclopedia
  3. "The quotient of two numbers (or quantities); the relative sizes of two numbers (or quantities)", "The Mathematics Dictionary"
  4. New International Encyclopedia
  5. Decimal fractions are frequently used in technological areas where ratio comparisons are important, such as aspect ratios (imaging), compression ratios (engines or data storage), etc.
  6. from the Encyclopedia Britannica
  7. New International Encyclopedia
  8. Belle Group concrete mixing hints
  9. Smith, p. 477
  10. Penny Cyclopedia, p. 307
  11. Smith, p. 478
  12. Heath, p. 112
  13. Heath, p. 113
  14. Smith, p. 480
  15. Heath, reference for section
  16. "Geometry, Euclidean" Encyclopædia Britannica Eleventh Edition p682.
  17. Heath p. 125
  18. "'Velocity' can be defined as the ratio... 'Population density' is the ratio... 'Gasoline consumption' is measure as the ratio...", "Ratio and Proportion: Research and Teaching in Mathematics Teachers"
  19. "Ratio as a Rate. The first type [of ratio] defined by Freudenthal, above, is known as rate, and illustrates a comparison between two variables with difference units. (...) A ratio of this sort produces a unique, new concept with its own entity, and this new concept is usually not considered a ratio, per se, but a rate or density.", "Ratio and Proportion: Research and Teaching in Mathematics Teachers"

Further reading

Look up ratio in Wiktionary, the free dictionary.
This article is issued from Wikipedia - version of the 9/22/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.