Württemberg K

Württemberg K class
DRG Class 59
ÖBB 659
Number(s) DRG 59 001–044
Manufacturer Esslingen
Year(s) of manufacture 1917–1919; 1923–1924
Retired 1953
Axle arrangement 1'F h4v
Gauge 1,435 mm (4 ft 8 12 in)
Length over buffers 20,200 mm (66 ft 3 in)
Service weight 108.0 t
Adhesive weight 94.6 t
Axle load 16.0 t
Indicated Power 1,412 kW
Driving wheel diameter 1,350 mm (4 ft 5 in)
Leading wheel diameter 943 mm (37.1 in)
LP cylinder bore 750 mm (30 in)
HP cylinder bore 500 mm (20 in)
Piston stroke 650 mm (26 in)
Boiler Overpressure 15 bar
Grate area 4.20 m2 (45.2 sq ft)
Superheater area 80.00 m2 (861.1 sq ft)
Evaporative heating area 232.00 m2 (2,497.2 sq ft)
Tender wü 2'2' T 20
pr 2'2' T 21.5
pr 2'2' T 31.5
Water capacity 20.0/21.5/31.5 m³
Brakes Compressed-air brake

The Württemberg Class K steam locomotives of the Royal Württemberg State Railways (Königlich Württembergische Staats-Eisenbahnen) were the only twelve-coupled locomotives built for a German railway company.

History

The 44 engines of this class built by the Maschinenfabrik Esslingen between 1917 and 1924 were intended for work on the Geislingen ramp (Geislinger Steige) and the Baden Black Forest line. As a result of good experiences in Austria and the fact that there was a maximum axle load of only 16 tonnes on those routes, it was decided to produce a twelve-coupled locomotive. The first and last coupled axles were given side-play (Gölsdorf system), the wheel flanges of the two centre axles were reduced by about 15 mm.

The locomotives proved to be a successful design that was very reliable and powerful. In operations on the hilly routes it was very thrifty, however it was not so economical on the flat. The Deutsche Reichsbahn, that had taken over all the locomotives as DRG Class 59, raised the permissible axle load on the important main lines, so that the performance of the Class K could finally be augmented by ten-coupled engines. As a result, no further batches were ordered.

Move to Austria

After the routes of the Geislinger Steige had been electrified, the engines were no longer required and were given away to Austria, where they were used on the Semmering railway. From there several units went to Yugoslavia and Hungary during the course of the Second World War. The vehicles that remained with, or were returned to, the Deutsche Bundesbahn continued in service until 1953.

Of the 30 examples that stayed in Austria after the Second World War, the majority were sold, two units went to the Soviet Union, six to the Hungarian Railways (MAV). The remaining four engines retained their serial numbers but were grouped into ÖBB Class 659, namely the 659.06, 23, 29 and 41. All locomotives of this class were retired by 1957.

Tenders

The vehicles were coupled with Württemberg and Prussian tenders of classes wü 2'2' T 20, pr 2'2' T 21.5 and pr 2'2' T 31.5.

See also

Literature


This article is issued from Wikipedia - version of the 9/15/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.