This article is about the Indian drone instrument. For other instruments of similar name, see Tanbur (disambiguation).
5-string Hemen & Co. instrumental tamburi, for accompanying sitar or sarod
Prof Hajikarim Ismailsaheb & Sons, Satarmakers Miraj, male vocal tanpura
A pair of female vocal tanpuras, ready to go to a concert
Tanjore-style Carnatic tambura
Side view of tanpura bridge
Top view of tanpura bridge

The tanpura (or tambura, tanpuri) is a long-necked plucked string instrument found in various forms in Indian music; it does not play melody but rather supports and sustains the melody of another instrument or singer by providing a continuous harmonic bourdon or drone. A tanpura is not played in rhythm with the soloist or percussionist: as the precise timing of plucking a cycle of four strings in a continuous loop is a determinant factor in the resultant sound, it is played unchangingly during the complete performance. The repeated cycle of plucking all strings creates the sonic canvas on which the melody of the raga is drawn. The combined sound of all strings, each string a fundamental tone with its own spectrum of overtones, is a rich and vibrant, dynamic-yet-static tone-conglomerate, due to interactive harmonic resonances that will support and blend with the external tones sung or played by the soloist.

The name tanapura is derived from tana, referring to a musical phrase, and pura, which means "full" or "complete". Hindustani musicians favour the term 'tanpura' whereas Carnatic musicians say 'tambura'; 'tanpuri' is a smaller variant used for accompanying instrumental soloists.


Tanpuras form the root of the ensemble and indeed of the music itself, as the tanpura creates an acoustic dynamic reference chord from which the ragas (melodic modes) derive their distinctive character, color and flavor. Concerning its history, A. D. Ranade states: "The first unambiguous reference to the tanpura is in Sangeet Parijat (1620). It is neither mentioned by the earlier texts nor does it find a place in sculptures". Stephen Slawek notes that by the end of the 16th century, the tanpura had "fully developed in its modern form", and was seen in the miniature paintings of the Mughals. Slawek further suggests that due to structural similarity the sitar and tanpura share a related history.[1]

An electronic tanpura, a small box that imitates the sound of a tanpura, is often used in contemporary Indian classical music performances instead of, or in addition to a tanpura, primarily in Carnatic music, though this practice is controversial amongst aficionados of high level Classical music. A 2006 article in the performing arts magazine Sruti notes: "Any model electronic tanpura produces a sound that is necessarily artificial, which is the opposite of artistic. The electronic substitute has no artistic value and has nothing to teach us but repetitive unnatural boredom."[2]


The body shape of the tanpura somewhat resembles that of the sitar, but it has no frets – as the strings are always plucked at their full lengths. One or more tanpuras may be used to accompany vocalists or instrumentalists. It has four or five (rarely six) metal strings, which are plucked one after another in a regular pattern to create a harmonic resonance on the basic notes of a key.

Bridge and strings

The overtone-rich sound and the audible movement in the inner resonances of tone is achieved by applying the principle of jivari which creates a sustained "buzzing" sound in which particular harmonics will resonate with focused clarity. Jiva refers to "soul", that which gives life, implying that the tanpura embodies an "animated" tone quality. To achieve this effect, the strings pass over a table-shaped, curved-top bridge, the front of which slopes gently away from the surface of the strings. When a string is plucked, it has an intermittent periodical grazing contact with the bridge. When the string moves up and down, the downward wave will touch a far point on the curve of the bridge, and as the energy of motion of the string gradually diminishes, these points of contact of the string on the bridge will gradually shift as well, being a compound function of amplitude, the curvature of the bridge, pitch, string tension and time. When the string is plucked, it has a large amplitude. As the energy of the string's movement gradually diminishes, the contact point of the string with the bridge slowly creeps up the slope of the bridge. Depending on scale, tension and pitch, this can take between three and ten seconds.

This dynamic process can be fine-tuned using a cotton thread between string and bridge: by shifting the thread, the grazing contact sequence is shifted to a different position on the bridge, changing the harmonic content. Every single string produces its own cascading range of harmonics and, at the same time, builds up a particular resonance. According to this principle, tanpuras are attentively tuned to achieve a particular tonal shade relative to the tonal characteristics of the raga. These more delicate aspects of tuning are directly related to what Indian musicians call raga svaroop, which is about how characteristic intonations are important defining aspects of a particular raga.[3] The tanpura's particular setup, with the cotton thread as a variable focus-point, made it possible to explore a multitude of harmonic relations produced by the subtle harmonic interplay in time of its four strings.

Sizes and tunings

Tanpuras come in different sizes and pitches: larger "males", smaller "females" for vocalists, and a yet smaller version is used for accompanying sitar or sarod, called tamburi. These play at the octave so as not to drown out the soloist's lower registers. Male vocalists use the biggest instruments and pitch their tonic note (Sa), often at D, C♯ or lower, some go down to B-flat; female singers usually a fifth higher, though these tonic notes may vary according to the preference of the singer, as there is no absolute and fixed pitch-reference in the Indian Classical music systems. One female singer may take her 'sa' at F, another at A, sitariyas tune mostly around C#, sarodiyas around C, sarangiyas vary more between D and F#, and bansuriyas mostly play from E. The male tanpura has an open string length of approximately one metre; the female is three-fourths of the male. The standard tuning is 5-8-8-1 (sol do' do' do) or, in Indian sargam, pa-SA-SA-sa. For ragas that omit the fifth tone, pa, the first string is tuned down to the natural fourth: 4-8-8-1 or Ma-sa-sa-Sa. Some ragas require a less common tuning with shuddh or komal NI (7th major/minor), NI-sa-sa-SA or 7-8-8-1, or even with the 6th, Dha-s-s-S, major or minor. With a five-string instrument, the seventh or NI (natural minor or major 7th) can be added: PA-NI-sa-sa-SA (5-7-8-8-1)or MA-NI-sa-sa-SA (4-7-8-8-1). Both minor and major 7th harmonics are clearly distinguishable in the harmonic texture of the overall sound, so when the Ni - strings are tuned into these harmonics, the resultant sound will be perfectly harmonious. Usually the octave strings are in steel wire, and the tonic, 4th or 5th strings in brass or bronze wire. If a string will be tuned to the 6th or 7th, a steel string is advised instead.


Tanpuras are designed in three different styles:


  1. Stephen Slawek (1987). Sitār Technique in Nibaddh Forms. Motilal Banarsidass Publ. pp. 8–. ISBN 978-81-208-0200-1.
  2. Sruti. P.N. Sundaresan. 2006. p. 71.
  3. "FUNDAMENTALS OF RAG". chandrakantha. Retrieved 3 June 2013.


Further reading

This article is issued from Wikipedia - version of the 10/16/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.