Boilermaker

For other uses, see Boilermaker (disambiguation).
Statue of a boilermaker by the sculptor Jef Lambeaux.
Welder makes boilers for a ship, June 1942

A boilermaker is a trained craftsman who produces steel fabrications from plates and sections. The name originated from craftsmen who would fabricate boilers, but they may work on projects as diverse as bridges to blast furnaces to the construction of mining equipment.[1] The trade of Boilermaker evolved from the industrial blacksmith and was known in the early 19th century as a "boilersmith". The involvement of boilermakers in the shipbuilding and engineering industries came about because of the changeover from wood to iron as a construction material. It was easier (and cheaper) to utilize the boilermaker's skills to construct the ship as they were already present in the shipyard constructing iron boilers for wooden steamships. This utilization of skills extended to virtually everything that was large and made of iron, or later, steel. In the UK this virtual monopoly over the key skill of the industrial revolution led to them being termed 'the labour aristocracy' by historians.[2]

Domestic boilers (USA)

In the USA many boilermakers are employed in repairing, repiping, and re-tubing commercial steam and hot water boilers used for heating and domestic hot water in commercial buildings and multi-family dwellings. Sometimes these boilers are referred to as pressure vessels. Generally, a pressure vessel is a storage tank or vessel that has been designed to operate at pressures above 15 psi (1.03 bar; 103 kPa). The two main tasks of boilermakers involve using oxy-acetylene gas torch sets to cut or gouge steel plate and tubes, followed by gas tungsten arc welding (GTAW), shielded metal arc welding (SMAW), or gas metal arc welding (GMAW) to attach and mend the cut sections of tubes and steel plates.[3]

R Stamp Welding (USA)

Boiler repair in the United States is governed by the National Board of Boiler and Pressure Vessel Inspectors and the ASME under a classification called R Stamp Welding. In order to perform R Stamp welds and repairs, boilermakers are tested and certified in the quality of their weld joints through a rigorous testing procedure. R stamps are issued to companies that have existing ASME code stamps issued for construction and whose QC system covers repairs or follow the guidelines set up by ASME to obtain an R stamp. Welders identify their welds by stamping their identifying welder number adjacent to their completed weld with a set of steel stencils.[4]

Power piping (USA)

Welding, fitting, and installing the tubes and accessories that attach to the boiler can also be performed by boilermakers, and is governed by the same organizations as R Stamp Welding, except this certification is called Powerpiping certification. The Powerpiping stamp contains two "P"s, the first inverted so that it mirrors the second. Power Piping is governed by ASME Code section B31.1.[5]

Application

Boilermaking, welding, and fitting tubes can be a full-time year round project at power plants, since stress fractures, leaks, and rust and corrosion cause a continual need for repair or replacement, and power plants often operate at very high steam pressures. Other boilermakers might work seasonally or on an individual project such as re-fitting a boiler in a seagoing vessel, or in the one-time remodeling of a steam plant.

Boiler repair can be a very valuable service since even the smallest steam boilers for dry cleaners, tailor and alterations shops can cost upwards of ten to twenty thousand dollars (US) to replace.

Training (USA)

Boilermakers usually go through a formal apprenticeship which includes about four years of paid on-the-job training combined with classroom instruction. Unions and many employers offer these apprenticeships. To become an apprentice, one must be at least 18 years old and have a high school diploma or GED. Attending a trade or technical school combined with employer-provided training can accelerate the learning curve.[6]

Trade unions (USA and UK)

The International Brotherhood of Boilermakers, Iron Ship Builders, Blacksmiths, Forgers and Helpers is a labor union for Boilermakers in the USA. In the UK Boilermakers traditionally joined the Boilermakers Society which merged with the GMWU, then an unskilled union, to form the modern GMB which still maintains a 'craft section' largely for Boilermakers.

Notable boilermakers and former boilermakers

References

Wikimedia Commons has media related to boilermakers.
  1. ↑ Bureau of Labor Statistics, US Department of Labor, Occupational Outlook Handbook, 2014-15 Edition, Boilermakers, on the Internet at http://www.bls.gov/ooh/construction-and-extraction/boilermakers.htm (visited January 23, 2014)
  2. ↑ Reid, Alastair J. (2010-05-25). The Tide of Democracy: Shipyard Workers and Social Relations in Britain, 1870-1950. Oxford University Press. ISBN 9781847793386.
  3. ↑ Bureau of Labor Statistics, US Department of Labor, Occupational Outlook Handbook, 2014-15 Edition, Boilermakers, on the Internet at http://www.bls.gov/ooh/construction-and-extraction/boilermakers.htm (visited January 23, 2014)
  4. ↑ http://www.nationalboard.org/index.aspx?pageID=115&ID=160
  5. ↑ https://www.asme.org/products/codes-standards/b311-2012-power-piping
  6. ↑ Employment and Training Administration, US Department of Labor, O*NET Online, Boilermakers, on the Internet at http://online.onetcenter.org/link/details/47-2011.00 (visited January 23, 2014)
This article is issued from Wikipedia - version of the 11/6/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.