Types of volcanic eruptions

"Eruption" redirects here. For other uses, see Eruption (disambiguation).
"Volcanic eruption" and "Volcanic eruptions" redirect here. For the short story, see Volcanic Eruption. For the film company, see Volcanic Eruptions.
Some of the eruptive structures formed during volcanic activity: a Plinian eruption column, Hawaiian pahoehoe flows, and a lava arc from a Strombolian eruption.

Several types of volcanic eruptions—during which lava, tephra (ash, lapilli, volcanic bombs and blocks), and assorted gases are expelled from a volcanic vent or fissure—have been distinguished by volcanologists. These are often named after famous volcanoes where that type of behavior has been observed. Some volcanoes may exhibit only one characteristic type of eruption during a period of activity, while others may display an entire sequence of types all in one eruptive series.

There are three different types of eruptions. The most well-observed are magmatic eruptions, which involve the decompression of gas within magma that propels it forward. Phreatomagmatic eruptions are another type of volcanic eruption, driven by the compression of gas within magma, the direct opposite of the process powering magmatic activity. The third eruptive type is the phreatic eruption, which is driven by the superheating of steam via contact with magma; these eruptive types often exhibit no magmatic release, instead causing the granulation of existing rock.

Within these wide-defining eruptive types are several subtypes. The weakest are Hawaiian and submarine, then Strombolian, followed by Vulcanian and Surtseyan. The stronger eruptive types are Pelean eruptions, followed by Plinian eruptions; the strongest eruptions are called "Ultra-Plinian." Subglacial and phreatic eruptions are defined by their eruptive mechanism, and vary in strength. An important measure of eruptive strength is Volcanic Explosivity Index (VEI), an order of magnitude scale ranging from 0 to 8 that often correlates to eruptive types.

Eruption mechanisms

Diagram showing the scale of VEI correlation with total ejecta volume.

Volcanic eruptions arise through three main mechanisms:[1]

There are two types of eruptions in terms of activity, explosive eruptions and effusive eruptions. Explosive eruptions are characterized by gas-driven explosions that propels magma and tephra.[1] Effusive eruptions, meanwhile, are characterized by the outpouring of lava without significant explosive eruption.[2]

Volcanic eruptions vary widely in strength. On the one extreme there are effusive Hawaiian eruptions, which are characterized by lava fountains and fluid lava flows, which are typically not very dangerous. On the other extreme, Plinian eruptions are large, violent, and highly dangerous explosive events. Volcanoes are not bound to one eruptive style, and frequently display many different types, both passive and explosive, even the span of a single eruptive cycle.[3] Volcanoes do not always erupt vertically from a single crater near their peak, either. Some volcanoes exhibit lateral and fissure eruptions. Notably, many Hawaiian eruptions start from rift zones,[4] and some of the strongest Surtseyan eruptions develop along fracture zones.[5] Scientists believed that pulses of magma mixed together in the chamber before climbing upward—a process estimated to take several thousands of years. But Columbia University volcanologists found that the eruption of Costa Rica’s Irazú Volcano in 1963 was likely triggered by magma that took a nonstop route from the mantle over just a few months.[6]

Volcano explosivity index

The volcanic explosivity index (commonly shortened to VEI) is a scale, from 0 to 8, for measuring the strength of eruptions. It is used by the Smithsonian Institution's Global Volcanism Program in assessing the impact of historic and prehistoric lava flows. It operates in a way similar to the Richter scale for earthquakes, in that each interval in value represents a tenfold increasing in magnitude (it is logarithmic).[7] The vast majority of volcanic eruptions are of VEIs between 0 and 2.[3]

Volcanic eruptions by VEI index[7]

VEI Plume height Eruptive volume * Eruption type Frequency ** Example
0 <100 m (330 ft) 1,000 m3 (35,300 cu ft) Hawaiian Continuous Kilauea
1 100–1,000 m (300–3,300 ft) 10,000 m3 (353,000 cu ft) Hawaiian/Strombolian Fortnightly Stromboli
2 1–5 km (1–3 mi) 1,000,000 m3 (35,300,000 cu ft) Strombolian/Vulcanian Monthly Galeras (1992)
3 3–15 km (2–9 mi) 10,000,000 m3 (353,000,000 cu ft) Vulcanian 3 monthly Nevado del Ruiz (1985)
4 10–25 km (6–16 mi) 100,000,000 m3 (0.024 cu mi) Vulcanian/Peléan 18 months Eyjafjallajökull (2010)
5 >25 km (16 mi) 1 km3 (0.24 cu mi) Plinian 10–15 years Mount St. Helens (1980)
6 >25 km (16 mi) 10 km3 (2 cu mi) Plinian/Ultra-Plinian 50–100 years Krakatoa (1883)
7 >25 km (16 mi) 100 km3 (20 cu mi) Ultra-Plinian 500–1000 years Tambora (1815)
8 >25 km (16 mi) 1,000 km3 (200 cu mi) Supervolcanic 50,000+ years[8][9] Lake Toba (74 k.y.a.)
* This is the minimum eruptive volume necessary for the eruption to be considered within the category.
** Values are a rough estimate. They indicate the frequencies for volcanoes of that magnitude OR HIGHER
There is a discontinuity between the 1st and 2nd VEI level; instead of increasing by a magnitude of 10, the value increases by a magnitude of 100 (from 10,000 to 1,000,000).

Magmatic eruptions

Magmatic eruptions produce juvenile clasts during explosive decompression from gas release. They range in intensity from the relatively small lava fountains on Hawaii to catastrophic Ultra-Plinian eruption columns more than 30 km (19 mi) high, bigger than the eruption of Mount Vesuvius in 79 that buried Pompeii.[1]

Hawaiian

Main article: Hawaiian eruption
Diagram of a Hawaiian eruption. (key: 1. Ash plume 2. Lava fountain 3. Crater 4. Lava lake 5. Fumaroles 6. Lava flow 7. Layers of lava and ash 8. Stratum 9. Sill 10. Magma conduit 11. Magma chamber 12. Dike) Click for larger version.

Hawaiian eruptions are a type of volcanic eruption, named after the Hawaiian volcanoes with which this eruptive type is hallmark. Hawaiian eruptions are the calmest types of volcanic events, characterized by the effusive eruption of very fluid basalt-type lavas with low gaseous content. The volume of ejected material from Hawaiian eruptions is less than half of that found in other eruptive types. Steady production of small amounts of lava builds up the large, broad form of a shield volcano. Eruptions are not centralized at the main summit as with other volcanic types, and often occur at vents around the summit and from fissure vents radiating out of the center.[4]

Hawaiian eruptions often begin as a line of vent eruptions along a fissure vent, a so-called "curtain of fire." These die down as the lava begins to concentrate at a few of the vents. Central-vent eruptions, meanwhile, often take the form of large lava fountains (both continuous and sporadic), which can reach heights of hundreds of meters or more. The particles from lava fountains usually cool in the air before hitting the ground, resulting in the accumulation of cindery scoria fragments; however, when the air is especially thick with clasts, they cannot cool off fast enough due to the surrounding heat, and hit the ground still hot, the accumulation of which forms spatter cones. If eruptive rates are high enough, they may even form splatter-fed lava flows. Hawaiian eruptions are often extremely long lived; Puʻu ʻŌʻō, a cinder cone of Kilauea, has been erupting continuously since 1983. Another Hawaiian volcanic feature is the formation of active lava lakes, self-maintaining pools of raw lava with a thin crust of semi-cooled rock; there are currently only 5 such lakes in the world, and the one at Kīlauea's Kupaianaha vent is one of them.[4]

Ropey pahoehoe lava from Kilauea, Hawaiʻi.

Flows from Hawaiian eruptions are basaltic, and can be divided into two types by their structural characteristics. Pahoehoe lava is a relatively smooth lava flow that can be billowy or ropey. They can move as one sheet, by the advancement of "toes," or as a snaking lava column. A'a lava flows are denser and more viscous then pahoehoe, and tend to move slower. Flows can measure 2 to 20 m (7 to 66 ft) thick. A'a flows are so thick that the outside layers cools into a rubble-like mass, insulating the still-hot interior and preventing it from cooling. A'a lava moves in a peculiar waythe front of the flow steepens due to pressure from behind until it breaks off, after which the general mass behind it moves forward. Pahoehoe lava can sometimes become A'a lava due to increasing viscosity or increasing rate of shear, but A'a lava never turns into pahoehoe flow.[10]

Hawaiian eruptions are responsible for several unique volcanological objects. Small volcanic particles are carried and formed by the wind, chilling quickly into teardrop-shaped glassy fragments known as Pele's tears (after Pele, the Hawaiian volcano deity). During especially high winds these chunks may even take the form of long drawn-out strands, known as Pele's hair. Sometimes basalt aerates into reticulite, the lowest density rock type on earth.[4]

Although Hawaiian eruptions are named after the volcanoes of Hawaii, they are not necessarily restricted to them; the largest lava fountain ever recorded formed on the island of Izu Ōshima (on Mount Mihara) in 1986, a 1,600 m (5,249 ft) gusher that was more than twice as high as the mountain itself (which stands at 764 m (2,507 ft)).[4][11]

Volcanoes known to have Hawaiian activity include:

Strombolian

Main article: Strombolian eruption
Diagram of a Strombolian eruption. (key: 1. Ash plume 2. Lapilli 3. Volcanic ash rain 4. Lava fountain 5. Volcanic bomb 6. Lava flow 7. Layers of lava and ash 8. Stratum 9. Dike 10. Magma conduit 11. Magma chamber 12. Sill) Click for larger version.

Strombolian eruptions are a type of volcanic eruption, named after the volcano Stromboli, which has been erupting continuously for centuries.[12] Strombolian eruptions are driven by the bursting of gas bubbles within the magma. These gas bubbles within the magma accumulate and coalesce into large bubbles, called gas slugs. These grow large enough to rise through the lava column.[13] Upon reaching the surface, the difference in air pressure causes the bubble to burst with a loud pop,[12] throwing magma in the air in a way similar to a soap bubble. Because of the high gas pressures associated with the lavas, continued activity is generally in the form of episodic explosive eruptions accompanied by the distinctive loud blasts.[12] During eruptions, these blasts occur as often as every few minutes.[14]

The term "Strombolian" has been used indiscriminately to describe a wide variety of volcanic eruptions, varying from small volcanic blasts to large eruptive columns. In reality, true Strombolian eruptions are characterized by short-lived and explosive eruptions of lavas with intermediate viscosity, often ejected high into the air. Columns can measure hundreds of meters in height. The lavas formed by Strombolian eruptions are a form of relatively viscous basaltic lava, and its end product is mostly scoria.[12] The relative passivity of Strombolian eruptions, and its non-damaging nature to its source vent allow Strombolian eruptions to continue unabated for thousands of years, and also makes it one of the least dangerous eruptive types.[14]

An example of the lava arcs formed during Strombolian activity. This image is of Stromboli itself.

Strombolian eruptions eject volcanic bombs and lapilli fragments that travel in parabolic paths before landing around their source vent. The steady accumulation of small fragments builds cinder cones composed completely of basaltic pyroclasts. This form of accumulation tends to result in well-ordered rings of tephra.[12]

Strombolian eruptions are similar to Hawaiian eruptions, but there are differences. Strombolian eruptions are noisier, produce no sustained eruptive columns, do not produce some volcanic products associated with Hawaiian volcanism (specifically Pele's tears and Pele's hair), and produce fewer molten lava flows (although the eruptive material does tend to form small rivulets).[12][14]

Volcanoes known to have Strombolian activity include:

Vulcanian

Main article: Vulcanian eruption
Diagram of a Vulcanian eruption. (key: 1. Ash plume 2. Lapilli 3. Lava fountain 4. Volcanic ash rain 5. Volcanic bomb 6. Lava flow 7. Layers of lava and ash 8. Stratum 9. Sill 10. Magma conduit 11. Magma chamber 12. Dike) Click for larger version.

Vulcanian eruptions are a type of volcanic eruption, named after the volcano Vulcano.[20] It was named so following Giuseppe Mercalli's observations of its 1888-1890 eruptions.[21] In Vulcanian eruptions, highly viscous magma within the volcano make it difficult for vesiculate gases to escape. Similar to Strombolian eruptions, this leads to the buildup of high gas pressure, eventually popping the cap holding the magma down and resulting in an explosive eruption. However, unlike Strombolian eruptions, ejected lava fragments are not aerodynamic; this is due to the higher viscosity of Vulcanian magma and the greater incorporation of crystalline material broken off from the former cap. They are also more explosive than their Strombolian counterparts, with eruptive columns often reaching between 5 and 10 km (3 and 6 mi) high. Lastly, Vulcanian deposits are andesitic to dacitic rather than basaltic.[20]

Initial Vulcanian activity is characterized by a series of short-lived explosions, lasting a few minutes to a few hours and typified by the ejection of volcanic bombs and blocks. These eruptions wear down the lava dome holding the magma down, and it disintegrates, leading to much more quiet and continuous eruptions. Thus an early sign of future Vulcanian activity is lava dome growth, and its collapse generates an outpouring of pyroclastic material down the volcano's slope.[20]

Deposits near the source vent consist of large volcanic blocks and bombs, with so-called "bread-crust bombs" being especially common. These deeply cracked volcanic chunks form when the exterior of ejected lava cools quickly into a glassy or fine-grained shell, but the inside continues to cool and vesiculate. The center of the fragment expands, cracking the exterior. However the bulk of Vulcanian deposits are fine grained ash. The ash is only moderately dispersed, and its abundance indicates a high degree of fragmentation, the result of high gas contents within the magma. In some cases these have been found to be the result of interaction with meteoric water, suggesting that Vulcanian eruptions are partially hydrovolcanic.[20]

Volcanoes that have exhibited Vulcanian activity include:

Peléan

Main article: Peléan eruption
Diagram of Peléan eruption. (key: 1. Ash plume 2. Volcanic ash rain 3. Lava dome 4. Volcanic bomb 5. Pyroclastic flow 6. Layers of lava and ash 7. Stratum 8. Magma conduit 9. Magma chamber 10. Dike) Click for larger version.

Peléan eruptions (or nuée ardente) are a type of volcanic eruption, named after the volcano Mount Pelée in Martinique, the site of a massive Peléan eruption in 1902 that is one of the worst natural disasters in history. In Peléan eruptions, a large amount of gas, dust, ash, and lava fragments are blown out the volcano's central crater,[24] driven by the collapse of rhyolite, dacite, and andesite lava dome collapses that often create large eruptive columns. An early sign of a coming eruption is the growth of a so-called Peléan or lava spine, a bulge in the volcano's summit preempting its total collapse.[25] The material collapses upon itself, forming a fast-moving pyroclastic flow[24] (known as a block-and-ash flow)[26] that moves down the side of the mountain at tremendous speeds, often over 150 km (93 mi) per hour. These massive landslides make Peléan eruptions one of the most dangerous in the world, capable of tearing through populated areas and causing massive loss of life. The 1902 eruption of Mount Pelée caused tremendous destruction, killing more than 30,000 people and completely destroying the town of St. Pierre, the worst volcanic event in the 20th century.[24]

Peléan eruptions are characterized most prominently by the incandescent pyroclastic flows that they drive. The mechanics of a Peléan eruption are very similar to that of a Vulcanian eruption, except that in Peléan eruptions the volcano's structure is able to withstand more pressure, hence the eruption occurs as one large explosion rather than several smaller ones.[27]

Volcanoes known to have Peléan activity include:

Plinian

Main article: Plinian eruption
Diagram of a Plinian eruption. (key: 1. Ash plume 2. Magma conduit 3. Volcanic ash rain 4. Layers of lava and ash 5. Stratum 6. Magma chamber) Click for larger version.

Plinian eruptions (or Vesuvian) are a type of volcanic eruption, named for the historical eruption of Mount Vesuvius in 79AD that buried the Roman towns of Pompeii and Herculaneum and, specifically, for its chronicler Pliny the Younger.[31] The process powering Plinian eruptions starts in the magma chamber, where dissolved volatile gases are stored in the magma. The gases vesiculate and accumulate as they rise through the magma conduit. These bubbles agglutinate and once they reach a certain size (about 75% of the total volume of the magma conduit) they explode. The narrow confines of the conduit force the gases and associated magma up, forming an eruptive column. Eruption velocity is controlled by the gas contents of the column, and low-strength surface rocks commonly crack under the pressure of the eruption, forming a flared outgoing structure that pushes the gases even faster.[32]

These massive eruptive columns are the distinctive feature of a Plinian eruption, and reach up 2 to 45 km (1 to 28 mi) into the atmosphere. The densest part of the plume, directly above the volcano, is driven internally by gas expansion. As it reaches higher into the air the plume expands and becomes less dense, convection and thermal expansion of volcanic ash drive it even further up into the stratosphere. At the top of the plume, powerful prevailing winds drive the plume in a direction away from the volcano.[32]

21 April 1990 eruptive column from Redoubt Volcano, as viewed to the west from the Kenai Peninsula.

These highly explosive eruptions are associated with volatile-rich dacitic to rhyolitic lavas, and occur most typically at stratovolcanoes. Eruptions can last anywhere from hours to days, with longer eruptions being associated with more felsic volcanoes. Although they are associated with felsic magma, Plinian eruptions can just as well occur at basaltic volcanoes, given that the magma chamber differentiates and has a structure rich in silicon dioxide.[31]

Plinian eruptions are similar to both Vulcanian and Strombolian eruptions, except that rather than creating discrete explosive events, Plinian eruptions form sustained eruptive columns. They are also similar to Hawaiian lava fountains in that both eruptive types produce sustained eruption columns maintained by the growth of bubbles that move up at about the same speed as the magma surrounding them.[31]

Regions affected by Plinian eruptions are subjected to heavy pumice airfall affecting an area 0.5 to 50 km3 (0 to 12 cu mi) in size.[31] The material in the ash plume eventually finds its way back to the ground, covering the landscape in a thick layer of many cubic kilometers of ash.[33]

Lahar flows from the 1985 eruption of Nevado del Ruiz, which totally destroyed the town of Armero in Colombia.

However the most dangerous eruptive feature are the pyroclastic flows generated by material collapse, which move down the side of the mountain at extreme speeds[31] of up to 700 km (435 mi) per hour and with the ability to extend the reach of the eruption hundreds of kilometers.[33] The ejection of hot material from the volcano's summit melts snowbanks and ice deposits on the volcano, which mixes with tephra to form lahars, fast moving mudslides with the consistency of wet concrete that move at the speed of a river rapid.[31]

Major Plinian eruptive events include:

Phreatomagmatic eruptions

Phreatomagmatic eruptions are eruptions that arise from interactions between water and magma. They are driven from thermal contraction (as opposed to magmatic eruptions, which are driven by thermal expansion) of magma when it comes in contact with water. This temperature difference between the two causes violent water-lava interactions that make up the eruption. The products of phreatomagmatic eruptions are believed to be more regular in shape and finer grained than the products of magmatic eruptions because of the differences in eruptive mechanisms.[1][36]

There is debate about the exact nature of phreatomagmatic eruptions, and some scientists believe that fuel-coolant reactions may be more critical to the explosive nature than thermal contraction.[36] Fuel coolant reactions may fragment the volcanic material by propagating stress waves, widening cracks and increasing surface area that ultimetly lead to rapid cooling and explosive contraction-driven eruptions.[1]

Surtseyan

Main article: Surtseyan eruption
Diagram of a Surtseyan eruption. (key: 1. Water vapor cloud 2. Compressed ash 3. Crater 4. Water 5. Layers of lava and ash 6. Stratum 7. Magma conduit 8. Magma chamber 9. Dike) Click for larger version.

A Surtseyan eruption (or hydrovolcanic) is a type of volcanic eruption caused by shallow-water interactions between water and lava, named so after its most famous example, the eruption and formation of the island of Surtsey off the coast of Iceland in 1963. Surtseyan eruptions are the "wet" equivalent of ground-based Strombolian eruptions, but because of where they are taking place they are much more explosive. This is because as water is heated by lava, it flashes in steam and expands violently, fragmenting the magma it is in contact with into fine-grained ash. Surtseyan eruptions are the hallmark of shallow-water volcanic oceanic islands, however they are not specifically confined to them. Surtseyan eruptions can happen on land as well, and are caused by rising magma that comes into contact with an aquifer (water-bearing rock formation) at shallow levels under the volcano.[5] The products of Surtseyan eruptions are generally oxidized palagonite basalts (though andesitic eruptions do occur, albeit rarely), and like Strombolian eruptions Surtseyan eruptions are generally continuous or otherwise rhythmic.[37]

A distinct defining feature of a Surtseyan eruption is the formation of a pyroclastic surge (or base surge), a ground hugging radial cloud that develops along with the eruption column. Base surges are caused by the gravitational collapse of a vaporous eruptive column, one that is denser overall then a regular volcanic column. The densest part of the cloud is nearest to the vent, resulting a wedge shape. Associated with these laterally moving rings are dune-shaped depositions of rock left behind by the lateral movement. These are occasionally disrupted by bomb sags, rock that was flung out by the explosive eruption and followed a ballistic path to the ground. Accumulations of wet, spherical ash known as accretionary lapilli is another common surge indicator.[5]

Over time Surtseyan eruptions tend to form maars, broad low-relief volcanic craters dug into the ground, and tuff rings, circular structures built of rapidly quenched lava. These structures are associated with a single vent eruption, however if eruptions arise along fracture zones a rift zone may be dug out; these eruptions tend to be more violent then the ones forming a tuff ring or maars, an example being the 1886 eruption of Mount Tarawera.[5][37] Littoral cones are another hydrovolcanic feature, generated by the explosive deposition of basaltic tephra (although they are not truly volcanic vents). They form when lava accumulates within cracks in lava, superheats and explodes in a steam explosion, breaking the rock apart and depositing it on the volcano's flank. Consecutive explosions of this type eventually generate the cone.[5]

Volcanoes known to have Surtseyan activity include:

Submarine

Main article: Submarine eruption
Diagram of a Submarine eruption. (key: 1. Water vapor cloud 2. Water 3. Stratum 4. Lava flow 5. Magma conduit 6. Magma chamber 7. Dike 8. Pillow lava) Click to enlarge.

Submarine eruptions are a type of volcanic eruption that occurs underwater. An estimated 75% of the total volcanic eruptive volume is generated by submarine eruptions near mid ocean ridges alone, however because of the problems associated with detecting deep sea volcanics, they remained virtually unknown until advances in the 1990s made it possible to observe them.[40]

Submarine eruptions may produce seamounts which may break the surface to form volcanic islands and island chains.

Submarine volcanism is driven by various processes. Volcanoes near plate boundaries and mid-ocean ridges are built by the decompression melting of mantle rock that rises on an upwelling portion of a convection cell to the crustal surface. Eruptions associated with subducting zones, meanwhile, are driven by subducting plates that add volatiles to the rising plate, lowering its melting point. Each process generates different rock; mid-ocean ridge volcanics are primarily basaltic, whereas subduction flows are mostly calc-alkaline, and more explosive and viscous.[41]

Spreading rates along mid-ocean ridges vary widely, from 2 cm (0.8 in) per year at the Mid-Atlantic Ridge, to up to 16 cm (6 in) along the East Pacific Rise. Higher spreading rates are a probably cause for higher levels of volcanism. The technology for studying seamount eruptions did not exist until advancements in hydrophone technology made it possible to "listen" to acoustic waves, known as T-waves, released by submarine earthquakes associated with submarine volcanic eruptions. The reason for this is that land-based seismometers cannot detect sea-based earthquakes below a magnitude of 4, but acoustic waves travel well in water and long periods of time. A system in the North Pacific, maintained by the United States Navy and originally intended for the detection of submarines, has detected an event on average every 2 to 3 years.[40]

The most common underwater flow is pillow lava, a circular lava flow named after its unusual shape. Less common are glassy, marginal sheet flows, indicative of larger-scale flows. Volcaniclastic sedimentary rocks are common in shallow-water environments. As plate movement starts to carry the volcanoes away from their eruptive source, eruption rates start to die down, and water erosion grinds the volcano down. The final stages of eruption caps the seamount in alkalic flows.[41] There are about 100,000 deepwater volcanoes in the world,[42] although most are beyond the active stage of their life.[41] Some exemplary seamounts are Loihi Seamount, Bowie Seamount, Davidson Seamount, and Axial Seamount.

Subglacial

Main article: Subglacial eruption
A diagram of a Subglacial eruption. (key: 1. Water vapor cloud 2. Crater lake 3. Ice 4. Layers of lava and ash 5. Stratum 6. Pillow lava 7. Magma conduit 8. Magma chamber 9. Dike) Click for larger version.

Subglacial eruptions are a type of volcanic eruption characterized by interactions between lava and ice, often under a glacier. The nature of glaciovolcanism dictates that it occurs at areas of high latitude and high altitude.[43] It has been suggested that subglacial volcanoes that are not actively erupting often dump heat into the ice covering them, producing meltwater.[44] This meltwater mix means that subglacial eruptions often generate dangerous jökulhlaups (floods) and lahars.[43]

The study of glaciovolcanism is still a relatively new field. Early accounts described the unusual flat-topped steep-sided volcanoes (called tuyas) in Iceland that were suggested to have formed from eruptions below ice. The first English-language paper on the subject was published in 1947 by William Henry Mathews, describing the Tuya Butte field in northwest British Columbia, Canada. The eruptive process that builds these structures, originally inferred in the paper,[43] begins with volcanic growth below the glacier. At first the eruptions resemble those that occur in the deep sea, forming piles of pillow lava at the base of the volcanic structure. Some of the lava shatters when it comes in contact with the cold ice, forming a glassy breccia called hyaloclastite. After a while the ice finally melts into a lake, and the more explosive eruptions of Surtseyan activity begins, building up flanks made up of mostly hyaloclastite. Eventually the lake boils off from continued volcanism, and the lava flows become more effusive and thicken as the lava cools much more slowly, often forming columnar jointing. Well-preserved tuyas show all of these stages, for example Hjorleifshofdi in Iceland.[45]

Products of volcano-ice interactions stand as various structures, whose shape is dependent on complex eruptive and environmental interactions. Glacial volcanism is a good indicator of past ice distribution, making it an important climatic marker. Since they are imbedded in ice, as ice retracts worldwide there are concerns that tuyas and other structures may destabalize, resulting in mass landslides. Evidence of volcanic-glacial interactions are evident in Iceland and parts of British Columbia, and it is even possible that they play a role in deglaciation.[43]

Glaciovolcanic products have been identified in Iceland, the Canadian province of British Columbia, the U.S. states of Hawaii and Alaska, the Cascade Range of western North America, South America and even on the planet Mars.[43] Volcanoes known to have subglacial activity include:

Viable microbial communities have been found living in deep (-2800 m) geothermal groundwater at 349 K and pressures >300 bar. Furthermore, microbes have been postulated to exist in basaltic rocks in rinds of altered volcanic glass. All of these conditions could exist in polar regions of Mars today where subglacial volcanism has occurred.

Phreatic eruptions

Main article: Phreatic eruption
Diagram of a phreatic eruption. (key: 1. Water vapor cloud 2. Magma conduit 3. Layers of lava and ash 4. Stratum 5. Water table 6. Explosion 7. Magma chamber)

Phreatic eruptions (or steam-blast eruptions) are a type of eruption driven by the expansion of steam. When cold ground or surface water come into contact with hot rock or magma it superheats and explodes, fracturing the surrounding rock[49] and thrusting out a mixture of steam, water, ash, volcanic bombs, and volcanic blocks.[50] The distinguishing feature of phreatic explosions is that they only blast out fragments of pre-existing solid rock from the volcanic conduit; no new magma is erupted.[51] Because they are driven by the cracking of rock strata under pressure, phreatic activity does not always result in an eruption; if the rock face is strong enough to withstand the explosive force, outright eruptions may not occur, although cracks in the rock will probably develop and weaken it, furthering future eruptions.[49]

Often a precursor of future volcanic activity,[52] phreatic eruptions are generally weak, although there have been exceptions.[51] Some phreatic events may be triggered by earthquake activity, another volcanic precursor, and they may also travel along dike lines.[49] Phreatic eruptions form base surges, lahars, avalanches, and volcanic block "rain." They may also release deadly toxic gas able to suffocate anyone in range of the eruption.[52]

Volcanoes known to exhibit phreatic activity include:

See also

References

  1. 1 2 3 4 5 Heiken, G. & Wohletz, K. Volcanic Ash. University of California Press. p. 246.
  2. "VHP Photo Glossary: Effusive Eruption". USGS. 29 December 2009. Retrieved 3 August 2010.
  3. 1 2 3 "Volcanoes of Canada: Volcanic eruptions". Geological Survey of Canada. Natural Resources Canada. 2 April 2009. Retrieved 3 August 2010.
  4. 1 2 3 4 5 6 7 8 "How Volcanoes Work: Hawaiian Eruptions". San Diego State University. Retrieved 2 August 2010.
  5. 1 2 3 4 5 6 7 8 "How Volcanoes Work: Hydrovolcic Eruptions". San Diego State University. Retrieved 4 August 2010.
  6. Ruprecht P, Plank T. Feeding andesitic eruptions with a high-speed connection from the mantle. Nature. 2013;500(7460):68-72.
  7. 1 2 3 "How Volcanoes Work: Eruption Variabilty". San Diego State University. Retrieved 3 August 2010.
  8. Dosseto, A., Turner, S. P. and Van-Orman, J. A. (editors) (2011). "Timescales of Magmatic Processes: From Core to Atmosphere". Wiley-Blackwell. ISBN 978-1-4443-3260-5.
  9. Rothery, David A. (2010). "Volcanoes, Earthquakes and Tsunamis". Teach Yourself.
  10. "How Volcanoes Work: Basaltic Lava". San Diego State University. Retrieved 2 August 2010.
  11. "Oshima". Global Volcanism Program. Smithsonian National Museum of Natural History. Retrieved 2 August 2010.
  12. 1 2 3 4 5 6 7 "How Volcanoes Work: Strombolian Eruptions". San Diego State University. Retrieved 29 July 2010.
  13. Mike Burton; Patrick Allard; Filippo Muré; Alessandro La Spina (2007). "Magmatic Gas Composition Reveals the Source Depth of Slug-Driven Strombolian Explosive Activity". Science. American Association for the Advancement of Science. 317 (5835): 227–230. Bibcode:2007Sci...317..227B. doi:10.1126/science.1141900. ISSN 1095-9203. Retrieved 30 July 2010.
  14. 1 2 3 Cain, Fraser (22 April 2010). "Strombolian Eruption". Universe Today. Retrieved 30 July 2010.
  15. Seach, John. "Mt Etna Volcano Eruptions - John Seach". Old eruptions. Volcanolive. Retrieved 30 July 2010.
  16. Seach, John. "Mt Etna Volcano Eruptions - John Seach". Recent eruptions. Volcanolive. Retrieved 30 July 2010.
  17. "Erebus". Global Volcanism Program. Smithsonian National Museum of Natural History. Retrieved 31 July 2010.
  18. Kyle, P. R. (Ed.), Volcanological and Environmental Studies of Mount Erebus, Antarctica, Antarctic Research Series, American Geophysical Union, Washington DC, 1994.
  19. "Stromboli". Global Volcanism Program. Smithsonian National Museum of Natural History. Retrieved 31 July 2010.
  20. 1 2 3 4 5 6 "How Volcanoes Work: Vulcanian Eruptions". San Diego State University. Retrieved 1 August 2010.
  21. Cain, Fraser. "Vulcanian Eruptions". Universe Today. Retrieved 1 August 2010.
  22. "How Volcanoes Work: Sakurajima Volcano". San Diego State University. Retrieved 1 August 2010.
  23. "VHP Photo Glossary: Vulcanian eruption". USGS. Retrieved 1 August 2010.
  24. 1 2 3 Cain, Fraser. "Pelean Eruption". Universe Today. Retrieved 2 August 2010.
  25. Donald Hyndman & David Hyndman (April 2008). Natural Hazards and Disasters. Cengage Learning. pp. 134–135. ISBN 978-0-495-31667-1. Retrieved 2 August 2010.
  26. Nelson, Stephan A. (30 September 2007). "Volcanoes, Magma, and Volcanic Eruptions". Tulane University. Retrieved 2 August 2010.
  27. Richard V. Fisher & Grant Heiken (1982). "Mt. Pelée, Martinique: May 8 and 20 pyroclastic flows and surges". Journal of Volcanology and Geothermal Research. 13 (3-4): 339–371. Bibcode:1982JVGR...13..339F. doi:10.1016/0377-0273(82)90056-7.
  28. "How Volcanoes Work: Mount Pelée Eruption (1902)". San Diego State University. Retrieved 1 August 2010.
  29. "Mayon". Global Volcanism Program. Smithsonian National Museum of Natural History. Retrieved 2 August 2010.
  30. "Lamington: Photo Gallery". Global Volcanism Program. Smithsonian National Museum of Natural History. Retrieved 2 August 2010.
  31. 1 2 3 4 5 6 7 8 "How Volcanoes Work: Plinian Eruptions". San Diego State University. Retrieved 3 August 2010.
  32. 1 2 "How Volcanoes Work: Eruption Model". San Diego State University. Retrieved 3 August 2010.
  33. 1 2 Cain, Fraser. "Plinian Eruption". Universe Today. Retrieved 3 August 2010.
  34. "How Volcanoes Work: Calderas". San Diego State University. Retrieved 3 August 2010.
  35. Stephen Self; Jing-Xia Zhao; Rick E. Holasek; Ronnie C. Torres & Alan J. King. "The Atmospheric Impact of the 1991 Mount Pinatubo Eruption". USGS. Retrieved 3 August 2010.
  36. 1 2 A.B. Starostin; A.A. Barmin & O.E. Melnik (May 2005). "A transient model for explosive and phreatomagmatic eruptions". Journal of Volcanology and Geothermal Research. Volcanic Eruption Mechanisms - Insights from intercomparison of models of conduit processes. 143 (1-3): 133–151. Bibcode:2005JVGR..143..133S. doi:10.1016/j.jvolgeores.2004.09.014. Retrieved 4 August 2010.
  37. 1 2 "X. Classification of Volcanic Eruptions: Surtseyan Eruptions". Lecture Notes. University of Alabama. Retrieved 5 August 2010.
  38. Alwyn Scarth & Jean-Claude Tanguy (31 May 2001). Volcanoes of Europe. Oxford University Press. p. 264. ISBN 978-0-19-521754-4. Retrieved 5 August 2010.
  39. "Hunga Tonga-Hunga Ha'apai: Index of Monthly Reports". Global Volcanism Program. Smithsonian National Museum of Natural History. Retrieved 5 August 2010.
  40. 1 2 Chadwick, Bill (10 January 2006). "Recent Submarine Volcanic Eruptions". Vents Program. NOAA. Retrieved 5 August 2010.
  41. 1 2 3 Hubert Straudigal & David A Clauge. "The Geological History of Deep-Sea Volcanoes: Biosphere, Hydrosphere, and Lithosphere Interactions" (PDF). Oceanography. Seamounts Special Issue. Oceanography Society. 32 (1). Retrieved 4 August 2010.
  42. Paul Wessel; David T. Sandwell; Seung-Sep Kim. "The Global Seamount Census" (PDF). Oceanography. Seamounts Special Issue. Oceanography Society. 23 (1). ISSN 1042-8275. Retrieved 25 June 2010.
  43. 1 2 3 4 5 "Glaciovolcanism - University of British Columbia". University of British Columbia. Retrieved 5 August 2010.
  44. 1 2 Black, Richard (20 January 2008). "Ancient Antarctic eruption noted". BBC News. Retrieved 5 August 2010.
  45. Alden, Andrew. "Tuya or Subglacial Volcano, Iceland". about.com. Retrieved 5 August 2010.
  46. "Kinds of Volcanic Eruptions". Volcano World. Oregon State University. Retrieved 5 August 2010.
  47. "Iceland's subglacial eruption". Hawaiian Volcano Observatory. USGS. 11 October 1996. Retrieved 5 August 2010.
  48. "Subglacial Volcanoes On Mars". Space Daily. 27 June 2001. Retrieved 5 August 2010.
  49. 1 2 3 Leonid N. Germanovich & Robert P. Lowell (1995). "The mechanism of phreatic eruptions". Journal of Geophysical Research. Solid Earth. American Geophysical Union. 100 (B5): 8417–8434. Bibcode:1995JGR...100.8417G. doi:10.1029/94JB03096. Retrieved 7 August 2010.
  50. 1 2 "VHP Photo Glossary: Phreatic eruption". USGS. 17 July 2008. Retrieved 6 August 2010.
  51. 1 2 3 4 Watson, John (5 February 1997). "Types of volcanic eruptions". USGS. Retrieved 7 August 2010.
  52. 1 2 "Phreatic Eruptions - John Seach". Volcano World. Retrieved 6 August 2010.

Further reading

Wikimedia Commons has media related to Diagrams of volcanic eruptions.

This article is issued from Wikipedia - version of the 11/29/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.