Heat capacity ratio

Branches

Equilibrium / Non-equilibrium

State
Equation of state Ideal gas Real gas State of matter Equilibrium Control volume Instruments
Processes
Isobaric Isochoric Isothermal Adiabatic Isentropic Isenthalpic Quasistatic Polytropic Free expansion Reversibility Irreversibility Endoreversibility
Cycles
Heat engines Heat pumps Thermal efficiency

System properties

Note: Conjugate variables in italics

Functions of state
Property diagrams Intensive and extensive properties
Temperature / Entropy (introduction) Pressure / Volume Chemical potential / Particle number Vapor quality Reduced properties
Process functions
Work Heat

Material properties

Property databases

Specific heat capacity

c=

$T$	$\partial S$
$N$	$\partial T$

Compressibility

\beta =-

$1$	$\partial V$
$V$	$\partial p$

Thermal expansion

\alpha =

$1$	$\partial V$
$V$	$\partial T$

Equations

Potentials

Internal energy
$U(S,V)$
Enthalpy
$H(S,p)=U+pV$
Helmholtz free energy
$A(T,V)=U-TS$
Gibbs free energy
$G(T,p)=H-TS$

History
Culture

History
General Heat Entropy Gas laws "Perpetual motion" machines
Philosophy
Entropy and time Entropy and life Brownian ratchet Maxwell's demon Heat death paradox Loschmidt's paradox Synergetics
Theories
Caloric theory Theory of heat Vis viva ("living force") Mechanical equivalent of heat Motive power
Key publications
"An Experimental Enquiry Concerning ... Heat" "On the Equilibrium of Heterogeneous Substances" "Reflections on the Motive Power of Fire"
Timelines
Thermodynamics Heat engines
Art Education
Maxwell's thermodynamic surface Entropy as energy dispersal

Scientists

Book:Thermodynamics

Heat capacity ratio for various gases^[1]^[2]
Temp.	Gas	$γ$	Temp.	Gas	$γ$	Temp.	Gas	$γ$
−181 °C	H₂	1.597	200 °C	Dry air	1.398	20 °C	NO	1.400
−76 °C		1.453	400 °C		1.393	20 °C	N₂O	1.310
20 °C		1.410	1000 °C		1.365	−181 °C	N₂	1.470
100 °C		1.404	2000 °C		1.088	15 °C	N₂	1.404
400 °C		1.387	0 °C	CO₂	1.310	20 °C	Cl₂	1.340
1000 °C		1.358	20 °C		1.300	−115 °C	CH₄	1.410
2000 °C		1.318	100 °C		1.281	−74 °C		1.350
20 °C	He	1.660	400 °C		1.235	20 °C		1.320
20 °C	H₂O	1.330	1000 °C		1.195	15 °C	NH₃	1.310
100 °C		1.324	20 °C	CO	1.400	19 °C	Ne	1.640
200 °C		1.310	−181 °C	O₂	1.450	19 °C	Xe	1.660
−180 °C	Ar	1.760	−76 °C		1.415	19 °C	Kr	1.680
20 °C	Ar	1.670	20 °C		1.400	15 °C	SO₂	1.290
0 °C	Dry air	1.403	100 °C		1.399	360 °C	Hg	1.670
20 °C		1.400	200 °C		1.397	15 °C	C₂H₆	1.220
100 °C		1.401	400 °C		1.394	16 °C	C₃H₈	1.130

In thermal physics and thermodynamics, the heat capacity ratio or adiabatic index or ratio of specific heats or Poisson constant, is the ratio of the heat capacity at constant pressure ( $C P$ ) to heat capacity at constant volume ( $C V$ ). It is sometimes also known as the isentropic expansion factor and is denoted by $γ$ (gamma) for an ideal gas or $κ$ (kappa), the isentropic exponent for a real gas. The symbol gamma is used by aerospace and chemical engineers. Mechanical engineers use the Roman letter $k$ .^[3]

\gamma ={\frac {C_{P}}{C_{V}}}={\frac {c_{P}}{c_{V}}}

where $C$ is the heat capacity and $c$ the specific heat capacity (heat capacity per unit mass) of a gas. The suffixes $P$ and $V$ refer to constant pressure and constant volume conditions, respectively.

To understand this relation, consider the following thought experiment. A closed pneumatic cylinder contains air. The piston is locked. The pressure inside is equal to atmospheric pressure. This cylinder is heated to a certain target temperature. Since the piston cannot move, the volume is constant. The temperature and pressure will rise. When the target temperature is reached, the heating is stopped. The amount of energy added equals $C V Δ T$ , with $Δ T$ representing the change in temperature. The piston is now freed and moves outwards, stopping as the pressure inside the chamber reaches atmospheric pressure. We assume the expansion occurs without exchange of heat (adiabatic expansion). Doing this work, air inside the cylinder will cool to below the target temperature. To return to the target temperature (still with a free piston), the air must be heated, but is no longer under constant volume since the piston is free to move as the gas is reheated. This extra heat amounts to about 40% more than the previous amount added. In this example, the amount of heat added with a locked piston is proportional to $C V$ , whereas the total amount of heat added is proportional to $C P$ . Therefore, the heat capacity ratio in this example is 1.4.

Another way of understanding the difference between $C P$ and $C V$ is that $C P$ applies if work is done to the system which causes a change in volume (such as by moving a piston so as to compress the contents of a cylinder), or if work is done by the system which changes its temperature (such as heating the gas in a cylinder to cause a piston to move). $C V$ applies only if $P dV$ – that is, the work done – is zero. Consider the difference between adding heat to the gas with a locked piston, and adding heat with a piston free to move, so that pressure remains constant. In the second case, the gas will both heat and expand, causing the piston to do mechanical work on the atmosphere. The heat that is added to the gas goes only partly into heating the gas, while the rest is transformed into the mechanical work performed by the piston. In the first, constant-volume case (locked piston) there is no external motion, and thus no mechanical work is done on the atmosphere; $C V$ is used. In the second case, additional work is done as the volume changes, so the amount of heat required to raise the gas temperature (the specific heat capacity) is higher for this constant pressure case.

Ideal gas relations

For an ideal gas, the heat capacity is constant with temperature. Accordingly, we can express the enthalpy as $H = C P T$ and the internal energy as $U = C V T$ . Thus, it can also be said that the heat capacity ratio is the ratio between the enthalpy to the internal energy:

\gamma ={\frac {H}{U}}\,.

Furthermore, the heat capacities can be expressed in terms of heat capacity ratio ( $γ$ ) and the gas constant ( $R$ ):

C_{P}={\frac {\gamma nR}{\gamma -1}}\qquad {\mbox{and}}\qquad C_{V}={\frac {nR}{\gamma -1}}\,,

where $n$ is the amount of substance in moles.

It can be rather difficult to find tabulated information for $C V$ , since $C P$ is more commonly tabulated. The following relation, can be used to determine $C V$ :

C_{V}=C_{P}-nR\,.

Relation with degrees of freedom

The heat capacity ratio ( $γ$ ) for an ideal gas can be related to the degrees of freedom ( $f$ ) of a molecule by:

\gamma =1+{\frac {2}{f}}\qquad {\mbox{or}}\qquad f={\frac {2}{\gamma -1}}\,.

Thus we observe that for a monatomic gas, with three degrees of freedom:

\gamma ={\frac {5}{3}}=1.6666\ldots \,,

while for a diatomic gas, with five degrees of freedom (at room temperature: three translational and two rotational degrees of freedom; the vibrational degree of freedom is not involved except at high temperatures):

\gamma ={\frac {7}{5}}=1.4\,.

For example, the terrestrial air is primarily made up of diatomic gases (around 78% nitrogen (N₂) and 21% oxygen (O₂)) and at standard conditions it can be considered to be an ideal gas. The above value of 1.4 is highly consistent with the measured adiabatic indices for dry air within a temperature range of 0–200 °C, exhibiting a deviation of only 0.2% (see tablation above).

Real gas relations

As temperature increases, higher energy rotational and vibrational states become accessible to molecular gases, thus increasing the number of degrees of freedom and lowering $γ$ . For a real gas, both $C P$ and $C V$ increase with increasing temperature, while continuing to differ from each other by a fixed constant (as above, $C P = C V + nR$ ) which reflects the relatively constant $PV$ difference in work done during expansion, for constant pressure vs. constant volume conditions. Thus, the ratio of the two values, $γ$ , decreases with increasing temperature. For more information on mechanisms for storing heat in gases, see the gas section of specific heat capacity.

Thermodynamic expressions

Values based on approximations (particularly $C P - C V = nR$ ) are in many cases not sufficiently accurate for practical engineering calculations such as flow rates through pipes and valves. An experimental value should be used rather than one based on this approximation, where possible. A rigorous value for the ratio $C P / C V$ can also be calculated by determining $C V$ from the residual properties expressed as:

C_{P}-C_{V}\ =\ -T{\frac {\left({\frac {\partial V}{\partial T}}\right)_{P}^{2}}{\left({\frac {\partial V}{\partial P}}\right)_{T}}}\ =\ -T{\frac {{\left({\frac {\partial P}{\partial T}}\right)}_{V}^{2}}{\left({\frac {\partial P}{\partial V}}\right)_{T}}}\,.

Values for $C P$ are readily available and recorded, but values for $C V$ need to be determined via relations such as these. See here for the derivation of the thermodynamic relations between the heat capacities.

The above definition is the approach used to develop rigorous expressions from equations of state (such as Peng–Robinson), which match experimental values so closely that there is little need to develop a database of ratios or $C V$ values. Values can also be determined through finite difference approximation.

Adiabatic process

This ratio gives the important relation for an isentropic (quasistatic, reversible, adiabatic process) process of a simple compressible calorically-perfect ideal gas:

pv^{\gamma }={\text{constant}}

where $p$ is pressure and $v$ is the gas specific volume.

References

↑ White, Frank M. Fluid Mechanics (4th ed.). McGraw Hill.
↑ Lange's Handbook of Chemistry (10th ed.). p. 1524.
↑ Fox, R.; McDonald, A.; Pritchard, P. Introduction to Fluid Mechanics (6th ed.). Wiley.

This article is issued from Wikipedia - version of the 10/20/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.