Table of thermodynamic equations

For list of mathematical notation used in these equations, see mathematical notation.

This article is a summary of common equations and quantities in thermodynamics (see thermodynamic equations for more elaboration). SI units are used for absolute temperature, not Celsius or Fahrenheit.

Definitions

Many of the definitions below are also used in the thermodynamics of chemical reactions.

General basic quantities

Quantity (Common Name/s) (Common) Symbol/s SI Units Dimension
Number of molecules N dimensionless dimensionless
Number of moles n mol [N]
Temperature T K [Θ]
Heat Energy Q, q J [M][L]2[T]−2
Latent Heat QL J [M][L]2[T]−2

General derived quantities

Quantity (Common Name/s) (Common) Symbol/s Defining Equation SI Units Dimension
Thermodynamic beta, Inverse temperature β J−1 [T]2[M]−1[L]−2
Thermodynamic Temperature τ

J [M] [L]2 [T]−2
Entropy S

,

J K−1 [M][L]2[T]−2 [Θ]−1
Pressure P

Pa M L−1T−2
Internal Energy U J [M][L]2[T]−2
Enthalpy H J [M][L]2[T]−2
Partition Function Z dimensionless dimensionless
Gibbs free energy G J [M][L]2[T]−2
Chemical potential (of

component i in a mixture)

μi

, where F is not proportional to N because μi depends on pressure. , where G is proportional to N (as long as the molar ratio composition of the system remains the same) because μi depends only on temperature and pressure and composition.

J [M][L]2[T]−2
Helmholtz free energy A, F J [M][L]2[T]−2
Landau potential, Landau Free Energy, Grand potential Ω, ΦG J [M][L]2[T]−2
Massieu Potential, Helmholtz free entropy Φ J K−1 [M][L]2[T]−2 [Θ]−1
Planck potential, Gibbs free entropy Ξ J K−1 [M][L]2[T]−2 [Θ]−1

Thermal properties of matter

Quantity (common name/s) (Common) symbol/s Defining equation SI units Dimension
General heat/thermal capacity C J K −1 [M][L]2[T]−2 [Θ]−1
Heat capacity (isobaric) Cp J K −1 [M][L]2[T]−2 [Θ]−1
Specific heat capacity (isobaric) Cmp J kg−1 K−1 [L]2[T]−2 [Θ]−1
Molar specific heat capacity (isobaric) Cnp J K −1 mol−1 [M][L]2[T]−2 [Θ]−1 [N]−1
Heat capacity (isochoric/volumetric) CV J K −1 [M][L]2[T]−2 [Θ]−1
Specific heat capacity (isochoric) CmV J kg−1 K−1 [L]2[T]−2 [Θ]−1
Molar specific heat capacity (isochoric) CnV J K −1 mol−1 [M][L]2[T]−2 [Θ]−1 [N]−1
Specific latent heat L J kg−1 [L]2[T]−2
Ratio of isobaric to isochoric heat capacity, heat capacity ratio, adiabatic index γ dimensionless dimensionless

Thermal transfer

Main article: Thermal conductivity
Quantity (common name/s) (Common) symbol/s Defining equation SI units Dimension
Temperature gradient No standard symbol K m−1 [Θ][L]−1
Thermal conduction rate, thermal current, thermal/heat flux, thermal power transfer P W = J s−1 [M] [L]2 [T]−3
Thermal intensity I W m−2 [M] [T]−3
Thermal/heat flux density (vector analogue of thermal intensity above) q W m−2 [M] [T]−3

Equations

The equations in this article are classified by subject.By Danish

Phase transitions

Physical situation Equations
Adiabatic transition
Isothermal transition

For an ideal gas

Isobaric transition p1 = p2, p = constant

Isochoric transition V1 = V2, V = constant

Adiabatic expansion

Free expansion
Work done by an expanding gas Process

Net Work Done in Cyclic Processes

Kinetic theory

Ideal gas equations
Physical situation Nomenclature Equations
Ideal gas law
  • p = pressure
  • V = volume of container
  • T = temperature
  • n = number of moles
  • R = Gas constant
  • N = number of molecules
  • k = Boltzmann's constant

Pressure of an ideal gas
  • m = mass of one molecule
  • Mm = molar mass

Ideal gas

Quantity General Equation Isobaric
Δp = 0
Isochoric
ΔV = 0
Isothermal
ΔT = 0
Adiabatic
Work
W

Heat Capacity
C
(as for real gas)
(for monatomic ideal gas)


(for diatomic ideal gas)


(for monatomic ideal gas)


(for diatomic ideal gas)

Internal Energy
ΔU








Enthalpy
ΔH
Entropy
Δs

[1]

Constant

Entropy

Statistical physics

Below are useful results from the Maxwell–Boltzmann distribution for an ideal gas, and the implications of the Entropy quantity. The distribution is valid for atoms or molecules constituting ideal gases.

Physical situation Nomenclature Equations
Maxwell–Boltzmann distribution
  • v = velocity of atom/molecule,
  • m = mass of each molecule (all molecules are identical in kinetic theory),
  • γ(p) = Lorentz factor as function of momentum (see below)
  • Ratio of thermal to rest mass-energy of each molecule:

K2 is the Modified Bessel function of the second kind.

Non-relativistic speeds

Relativistic speeds (Maxwell-Jüttner distribution)

Entropy Logarithm of the density of states
  • Pi = probability of system in microstate i
  • Ω = total number of microstates

where:

Entropy change

Entropic force
Equipartition theorem
  • df = degree of freedom
Average kinetic energy per degree of freedom

Internal energy

Corollaries of the non-relativistic Maxwell–Boltzmann distribution are below.

Physical situation Nomenclature Equations
Mean speed
Root mean square speed
Modal speed
Mean free path
  • σ = Effective cross-section
  • n = Volume density of number of target particles
  • = Mean free path

Quasi-static and reversible processes

For quasi-static and reversible processes, the first law of thermodynamics is:

where δQ is the heat supplied to the system and δW is the work done by the system.

Thermodynamic potentials

The following energies are called the thermodynamic potentials,

Name Symbol Formula Natural variables
Internal energy
Helmholtz free energy
Enthalpy
Gibbs free energy
Landau Potential (Grand potential) ,

and the corresponding fundamental thermodynamic relations or "master equations"[2] are:

Potential Differential
Internal energy
Enthalpy
Helmholtz free energy
Gibbs free energy

Maxwell's relations

The four most common Maxwell's relations are:

Physical situation Nomenclature Equations
Thermodynamic potentials as functions of their natural variables

More relations include the following.

Other differential equations are:

Name H U G
Gibbs–Helmholtz equation

Quantum properties

where N is number of particles, h is Planck's constant, I is moment of inertia, and Z is the partition function, in various forms:

Degree of freedom Partition function
Translation
Vibration
Rotation

Thermal properties of matter

Coefficients Equation
Joule-Thomson coefficient
Compressibility (constant temperature)
Coefficient of thermal expansion (constant pressure)
Heat capacity (constant pressure)
Heat capacity (constant volume)

Thermal transfer

Physical situation Nomenclature Equations
Net intensity emission/absorption
  • Texternal = external temperature (outside of system)
  • Tsystem = internal temperature (inside system)
  • ε = emmisivity
Internal energy of a substance
  • CV = isovolumetric heat capacity of substance
  • ΔT = temperature change of substance
Meyer's equation
  • Cp = isobaric heat capacity
  • CV = isovolumetric heat capacity
  • n = number of moles
Effective thermal conductivities
  • λi = thermal conductivity of substance i
  • λnet = equivalent thermal conductivity
Series

Parallel

Thermal efficiencies

Physical situation Nomenclature Equations
Thermodynamic engines
  • η = efficiency
  • W = work done by engine
  • QH = heat energy in higher temperature reservoir
  • QL = heat energy in lower temperature reservoir
  • TH = temperature of higher temp. reservoir
  • TL = temperature of lower temp. reservoir
Thermodynamic engine:

Carnot engine efficiency:

Refrigeration
  • K = coefficient of refrigeration performance
Refrigeration performance

Carnot refrigeration performance

See also

References

  1. Keenan, Thermodynamics, Wiley, New York, 1947
  2. Physical chemistry, P.W. Atkins, Oxford University Press, 1978, ISBN 0 19 855148 7
  • Atkins, Peter and de Paula, Julio Physical Chemistry, 7th edition, W.H. Freeman and Company, 2002 [ISBN 0-7167-3539-3].
    • Chapters 1 - 10, Part 1: Equilibrium.
  • Bridgman, P.W., Phys. Rev., 3, 273 (1914).
  • Landsberg, Peter T. Thermodynamics and Statistical Mechanics. New York: Dover Publications, Inc., 1990. (reprinted from Oxford University Press, 1978).
  • Lewis, G.N., and Randall, M., "Thermodynamics", 2nd Edition, McGraw-Hill Book Company, New York, 1961.
  • Reichl, L.E., "A Modern Course in Statistical Physics", 2nd edition, New York: John Wiley & Sons, 1998.
  • Schroeder, Daniel V. Thermal Physics. San Francisco: Addison Wesley Longman, 2000 [ISBN 0-201-38027-7].
  • Silbey, Robert J., et al. Physical Chemistry. 4th ed. New Jersey: Wiley, 2004.
  • Callen, Herbert B. (1985). "Thermodynamics and an Introduction to Themostatistics", 2nd Ed., New York: John Wiley & Sons.
This article is issued from Wikipedia - version of the 11/18/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.