Missisquoi River Bridge

Missisquoi River Bridge
Location VT 105A over the Missisquoi River, Richford, Vermont
Coordinates 45°0′49″N 72°35′16″W / 45.01361°N 72.58778°W / 45.01361; -72.58778Coordinates: 45°0′49″N 72°35′16″W / 45.01361°N 72.58778°W / 45.01361; -72.58778
Area less than one acre
Built 1929 (1929)
Built by Pittsburgh-Des Moines Steel Co.
Architectural style Parker through truss bridge
MPS Metal Truss, Masonry, and Concrete Bridges in Vermont MPS
NRHP Reference # 90001494[1]
Added to NRHP October 11, 1990

The Mississquoi River Bridge is a steel truss bridge, spanning the Missisquoi River between Richford, Vermont and Sutton, Quebec on the Canada-United States border. It connects Chemin de la Vallée Missisquoi in Sutton with Vermont Route 105A in Richford, between the border stations of the East Richford–Glen Sutton Border Crossing. The bridge was built by the state of Vermont in 1929, and is one of two in the state built by the Pittsburgh-Des Moines Steel Company. It was listed on the United States National Register of Historic Places in 1990.[1]

Description and history

The Missisquoi River Bridge is located in northeastern Richford and southeastern Sutton, at a point where the Missisquoi River flows across the international border (an east-west line) in a roughly southwesterly direction. The bridge is just northwest of the small village of East Richford, with only Canada's Glen Sutton border station in the immediate vicinity north of the border. The bridge is a two-span metal Parker through truss structure, 205 feet (62 m) in length, and was assembled with riveted construction. The trusses rest on abutments and a pier of poured concrete. One span is 150 feet (46 m) long, and the other is 50 feet (15 m) long. The bridge is 21.6 feet (6.6 m) wide, and carries two lanes of traffic on a concrete deck. The maximum truss depth is 19 feet (5.8 m) and the end portals have clearance of 15 feet (4.6 m).[2]

The bridge was built by the state of Vermont in 1929, as part of a program to build more than 1,200 bridges after devastating floods in 1927. The bridge was manufactured by the Pittsburgh-Des Moines Steel Company, and is only one of two known bridges in the state to be built by that firm. The bridge exhibits characteristics of standardized design developed by the state to speed construction of bridges at the time. The border crossing point was at the time economically important, providing access to the markets of southern Quebec to the industries in Richford.[2]

See also

References

  1. 1 2 National Park Service (2010-07-09). "National Register Information System". National Register of Historic Places. National Park Service.
  2. 1 2 Mary Hotaling (1990). "NRHP nomination for Missisquoi River Bridge" (PDF). National Park Service. Retrieved 2016-11-13. with photos from 1985
This article is issued from Wikipedia - version of the 12/2/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.