PRR DD1

PRR DD1

Type and origin Power type Electric Builder Altoona Works Build date 1911 Total produced 66 (in 33 married pairs)

Specifications AAR wheel arr. 2-B+B-2 UIC class 2′B+B2′ Gauge 4 ft 8 ^1⁄2 in (1,435 mm) standard gauge Leading dia. 36 in (914 mm) Driver dia. 72 in (1,829 mm) Wheelbase 7 ft 5 in (2.26 m) between driving axles Length 64 ft 11 in (19.79 m) Width 9 ft 1 in (2.77 m) Height 14 ft 8 in (4.47 m) Adhesive weight 199,000 lb (90,260 kilograms; 90.26 tonnes) Loco weight 313,000 lb (142,000 kilograms; 142.0 tonnes) Electric system(s) 650 V DC Third rail Current collection Contact shoe Traction motors 2 × 315-A 2,000 hp (1,500 kW) Transmission Resistance controlled DC current supplied to DC motors connected to the axles through Jackshaft and side rods

Performance figures Maximum speed 85 mph (137 km/h) Power output 1,580 hp (1,180 kW) continuous Tractive effort 55,500 lbf (247 kN)

The Pennsylvania Railroad's class DD1 were semi-permanently coupled pairs of third rail direct current electric locomotives built for the railroad's initial New York-area electrification.^[1] They operated between Manhattan Transfer and Pennsylvania Station in New York City, and from there to the coach yards at Sunnyside Yard in Queens, New York. Some also operated on the PRR-owned Long Island Rail Road's extensive third rail network. They had a wheel arrangement of 4-4-0+0-4-4 in the Whyte notation; in other words, two 4-4-0 locomotives coupled back-to-back, hence its class letter, as the Pennsylvania listed all 4-4-0s under Class D. In the AAR wheel arrangement notation, this is described as 2B+B2. Each half-locomotive contained one large electric motor mounted in the body and driving via a jackshaft and side rods.^[2] Those electric motors gave the DD1 a potential top speed of 85 mph (137 km/h), though PRR/LIRR timetables never allowed more than 65 mph. The simplicity and reliability of these locomotives allowed it to outlast its potential replacement model, the PRR L5.

One pair, Nos. 3936 and 3937, is in the Railroad Museum of Pennsylvania and was listed on the National Register of Historic Places.

• 
  Running gear and electrical equipment
• 
  Side-view drawing

See also

• PRR locomotive classification

Footnotes

1. Staufer & Pennypacker (1962), p. 248-253.
2. Middleton (2002), p. 24-25.

References

• Middleton, William D. (2002). The Pennsylvania Railroad - Under Wire (1st ed.). Milwaukee, WI: Kalmbach Publishing. ISBN 978-0-89024-617-7. OCLC 51208625.
• Staufer, Alvin F.; Pennypacker, Bert (1962). Pennsy Power: Steam and Electric Locomotives of the Pennsylvania Railroad, 1900-1957. Research by Martin Flattley. Carollton, OH: Alvin F. Staufer. ISBN 978-0944513040. LCCN 62020878. OCLC 602543182.

External links

• LIRR Early Electric Engines (TrainsAreFun.com)