In mathematics, topology (from the Greek τόπος, place, and λόγος, study) is concerned with the properties of space that are preserved under continuous deformations, such as stretching and bending, but not tearing or gluing. This can be studied by considering a collection of subsets, called open sets, that satisfy certain properties, turning the given set into what is known as a topological space. Important topological properties include connectedness and compactness.
Topology developed as a field of study out of geometry and set theory, through analysis of concepts such as space, dimension, and transformation. Such ideas go back to Gottfried Leibniz, who in the 17th century envisioned the geometria situs (Greek-Latin for "geometry of place") and analysis situs (Greek-Latin for "picking apart of place"). Leonhard Euler's Seven Bridges of Königsberg Problem and Polyhedron Formula are arguably the field's first theorems. The term topology was introduced by Johann Benedict Listing in the 19th century, although it was not until the first decades of the 20th century that the idea of a topological space was developed. By the middle of the 20th century, topology had become a major branch of mathematics.
Topology has many subfields:
- General topology, also called point-set topology, establishes the foundational aspects of topology and investigates properties of topological spaces and concepts inherent to topological spaces. It defines the basic notions used in all other branches of topology (including concepts like compactness and connectedness).
- Algebraic topology tries to measure degrees of connectivity using algebraic constructs such as homology and homotopy groups.
- Differential topology is the field dealing with differentiable functions on differentiable manifolds. It is closely related to differential geometry and together they make up the geometric theory of differentiable manifolds.
- Geometric topology primarily studies manifolds and their embeddings (placements) in other manifolds. A particularly active area is low-dimensional topology, which studies manifolds of four or fewer dimensions. This includes knot theory, the study of mathematical knots.
Topology, as a well-defined mathematical discipline, originates in the early part of the twentieth century, but some isolated results can be traced back several centuries. Among these are certain questions in geometry investigated by Leonhard Euler. His 1736 paper on the Seven Bridges of Königsberg is regarded as one of the first practical applications of topology. On 14 November 1750 Euler wrote to a friend that he had realised the importance of the edges of a polyhedron. This led to his polyhedron formula, V − E + F = 2 (where V, E and F respectively indicate the number of vertices, edges and faces of the polyhedron). Some authorities regard this analysis as the first theorem, signalling the birth of topology.
Further contributions were made by Augustin-Louis Cauchy, Ludwig Schläfli, Johann Benedict Listing, Bernhard Riemann and Enrico Betti. Listing introduced the term "Topologie" in Vorstudien zur Topologie, written in his native German, in 1847, having used the word for ten years in correspondence before its first appearance in print. The English form "topology" was used in 1883 in Listing's obituary in the journal Nature to distinguish "...qualitative geometry from the ordinary geometry in which quantitative relations chiefly are treated." The term "topologist" in the sense of a specialist in topology was used in 1905 in the magazine Spectator.
Their work was corrected, consolidated and greatly extended by Henri Poincaré. In 1895 he published his ground-breaking paper on Analysis Situs, which introduced the concepts now known as homotopy and homology, which are now considered part of algebraic topology.
|Manifold|| Euler No.|
|Orientability||Betti numbers|| Torsion coefficient|
|g-holed torus (Genus = g)||2 − 2g||Orientable||1||2g||1||none|
|Sphere with c cross-caps||2 − c||Non-orientable||1||c − 1||0||2|
| 2-Manifold with g holes|
and c cross-caps (c > 0)
|2 − (2g + c)||Non-orientable||1||(2g + c) − 1||0||2|
Unifying the work on function spaces of Georg Cantor, Vito Volterra, Cesare Arzelà, Jacques Hadamard, Giulio Ascoli and others, Maurice Fréchet introduced the metric space in 1906. A metric space is now considered a special case of a general topological space, with any given topological space potentially giving rise to many distinct metric spaces. In 1914, Felix Hausdorff coined the term "topological space" and gave the definition for what is now called a Hausdorff space. Currently, a topological space is a slight generalization of Hausdorff spaces, given in 1922 by Kazimierz Kuratowski.
Modern topology depends strongly on the ideas of set theory, developed by Georg Cantor in the later part of the 19th century. In addition to establishing the basic ideas of set theory, Cantor considered point sets in Euclidean space as part of his study of Fourier series. For further developments, see point-set topology and algebraic topology.
Topology can be formally defined as "the study of qualitative properties of certain objects (called topological spaces) that are invariant under a certain kind of transformation (called a continuous map), especially those properties that are invariant under a certain kind of invertible transformation (called homeomorphism)."
Topology is also used to refer to a structure imposed upon a set X, a structure that essentially 'characterizes' the set X as a topological space by taking proper care of properties such as convergence, connectedness and continuity, upon transformation.
Topological spaces show up naturally in almost every branch of mathematics. This has made topology one of the great unifying ideas of mathematics.
The motivating insight behind topology is that some geometric problems depend not on the exact shape of the objects involved, but rather on the way they are put together. For example, the square and the circle have many properties in common: they are both one dimensional objects (from a topological point of view) and both separate the plane into two parts, the part inside and the part outside.
In one of the first papers in topology, Leonhard Euler demonstrated that it was impossible to find a route through the town of Königsberg (now Kaliningrad) that would cross each of its seven bridges exactly once. This result did not depend on the lengths of the bridges, nor on their distance from one another, but only on connectivity properties: which bridges connect to which islands or riverbanks. This problem in introductory mathematics called Seven Bridges of Königsberg led to the branch of mathematics known as graph theory.
Similarly, the hairy ball theorem of algebraic topology says that "one cannot comb the hair flat on a hairy ball without creating a cowlick." This fact is immediately convincing to most people, even though they might not recognize the more formal statement of the theorem, that there is no nonvanishing continuous tangent vector field on the sphere. As with the Bridges of Königsberg, the result does not depend on the shape of the sphere; it applies to any kind of smooth blob, as long as it has no holes.
To deal with these problems that do not rely on the exact shape of the objects, one must be clear about just what properties these problems do rely on. From this need arises the notion of homeomorphism. The impossibility of crossing each bridge just once applies to any arrangement of bridges homeomorphic to those in Königsberg, and the hairy ball theorem applies to any space homeomorphic to a sphere.
Intuitively, two spaces are homeomorphic if one can be deformed into the other without cutting or gluing. A traditional joke is that a topologist cannot distinguish a coffee mug from a doughnut, since a sufficiently pliable doughnut could be reshaped to a coffee cup by creating a dimple and progressively enlarging it, while shrinking the hole into a handle.
Homeomorphism can be considered the most basic topological equivalence. Another is homotopy equivalence. This is harder to describe without getting technical, but the essential notion is that two objects are homotopy equivalent if they both result from "squishing" some larger object.
An introductory exercise is to classify the uppercase letters of the English alphabet according to homeomorphism and homotopy equivalence. The result depends partially on the font used. The figures use the sans-serif Myriad font. Homotopy equivalence is a rougher relationship than homeomorphism; a homotopy equivalence class can contain several homeomorphism classes. The simple case of homotopy equivalence described above can be used here to show two letters are homotopy equivalent. For example, O fits inside P and the tail of the P can be squished to the "hole" part.
Homeomorphism classes are:
- no holes,
- no holes three tails,
- no holes four tails,
- one hole no tail,
- one hole one tail,
- one hole two tails,
- two holes no tail, and
- a bar with four tails (the "bar" on the K is almost too short to see).
Homotopy classes are larger, because the tails can be squished down to a point. They are:
- one hole,
- two holes, and
- no holes.
To classify the letters correctly, we must show that two letters in the same class are equivalent and two letters in different classes are not equivalent. In the case of homeomorphism, this can be done by selecting points and showing their removal disconnects the letters differently. For example, X and Y are not homeomorphic because removing the center point of the X leaves four pieces; whatever point in Y corresponds to this point, its removal can leave at most three pieces. The case of homotopy equivalence is harder and requires a more elaborate argument showing an algebraic invariant, such as the fundamental group, is different on the supposedly differing classes.
Topologies on sets
The term topology also refers to a specific mathematical idea central to the area of mathematics called topology. Informally, a topology tells how elements of a set relate spatially to each other. The same set can have different topologies. For instance, the real line, the complex plane (which is a 1-dimensional complex vector space), and the Cantor set can be thought of as the same set with different topologies.
Formally, let X be a set and let τ be a family of subsets of X. Then τ is called a topology on X if:
- Both the empty set and X are elements of τ
- Any union of elements of τ is an element of τ
- Any intersection of finitely many elements of τ is an element of τ
If τ is a topology on X, then the pair (X, τ) is called a topological space. The notation Xτ may be used to denote a set X endowed with the particular topology τ.
The members of τ are called open sets in X. A subset of X is said to be closed if its complement is in τ (i.e., its complement is open). A subset of X may be open, closed, both (clopen set), or neither. The empty set and X itself are always both closed and open. An open set containing a point x is called a 'neighborhood' of x.
A set with a topology is called a topological space.
Continuous functions and homeomorphisms
A function or map from one topological space to another is called continuous if the inverse image of any open set is open. If the function maps the real numbers to the real numbers (both spaces with the Standard Topology), then this definition of continuous is equivalent to the definition of continuous in calculus. If a continuous function is one-to-one and onto, and if the inverse of the function is also continuous, then the function is called a homeomorphism and the domain of the function is said to be homeomorphic to the range. Another way of saying this is that the function has a natural extension to the topology. If two spaces are homeomorphic, they have identical topological properties, and are considered topologically the same. The cube and the sphere are homeomorphic, as are the coffee cup and the doughnut. But the circle is not homeomorphic to the doughnut.
While topological spaces can be extremely varied and exotic, many areas of topology focus on the more familiar class of spaces known as manifolds. A manifold is a topological space that resembles Euclidean space near each point. More precisely, each point of an n-dimensional manifold has a neighbourhood that is homeomorphic to the Euclidean space of dimension n. Lines and circles, but not figure eights, are one-dimensional manifolds. Two-dimensional manifolds are also called surfaces. Examples include the plane, the sphere, and the torus, which can all be realized without self-intersection in three dimensions, but also the Klein bottle and real projective plane, which cannot.
General topology is the branch of topology dealing with the basic set-theoretic definitions and constructions used in topology. It is the foundation of most other branches of topology, including differential topology, geometric topology, and algebraic topology. Another name for general topology is point-set topology.
The fundamental concepts in point-set topology are continuity, compactness, and connectedness. Intuitively, continuous functions take nearby points to nearby points. Compact sets are those that can be covered by finitely many sets of arbitrarily small size. Connected sets are sets that cannot be divided into two pieces that are far apart. The words nearby, arbitrarily small, and far apart can all be made precise by using open sets. If we change the definition of open set, we change what continuous functions, compact sets, and connected sets are. Each choice of definition for open set is called a topology. A set with a topology is called a topological space.
Metric spaces are an important class of topological spaces where distances can be assigned a number called a metric. Having a metric simplifies many proofs, and many of the most common topological spaces are metric spaces.
Algebraic topology is a branch of mathematics that uses tools from abstract algebra to study topological spaces. The basic goal is to find algebraic invariants that classify topological spaces up to homeomorphism, though usually most classify up to homotopy equivalence.
Although algebraic topology primarily uses algebra to study topological problems, using topology to solve algebraic problems is sometimes also possible. Algebraic topology, for example, allows for a convenient proof that any subgroup of a free group is again a free group.
Differential topology is the field dealing with differentiable functions on differentiable manifolds. It is closely related to differential geometry and together they make up the geometric theory of differentiable manifolds.
More specifically, differential topology considers the properties and structures that require only a smooth structure on a manifold to be defined. Smooth manifolds are 'softer' than manifolds with extra geometric structures, which can act as obstructions to certain types of equivalences and deformations that exist in differential topology. For instance, volume and Riemannian curvature are invariants that can distinguish different geometric structures on the same smooth manifold—that is, one can smoothly "flatten out" certain manifolds, but it might require distorting the space and affecting the curvature or volume.
Geometric topology is a branch of topology that primarily focuses on low-dimensional manifolds (i.e. dimensions 2,3 and 4) and their interaction with geometry, but it also includes some higher-dimensional topology. Some examples of topics in geometric topology are orientability, handle decompositions, local flatness, and the planar and higher-dimensional Schönflies theorem.
Low-dimensional topology is strongly geometric, as reflected in the uniformization theorem in 2 dimensions – every surface admits a constant curvature metric; geometrically, it has one of 3 possible geometries: positive curvature/spherical, zero curvature/flat, negative curvature/hyperbolic – and the geometrization conjecture (now theorem) in 3 dimensions – every 3-manifold can be cut into pieces, each of which has one of eight possible geometries.
2-dimensional topology can be studied as complex geometry in one variable (Riemann surfaces are complex curves) – by the uniformization theorem every conformal class of metrics is equivalent to a unique complex one, and 4-dimensional topology can be studied from the point of view of complex geometry in two variables (complex surfaces), though not every 4-manifold admits a complex structure.
Occasionally, one needs to use the tools of topology but a "set of points" is not available. In pointless topology one considers instead the lattice of open sets as the basic notion of the theory, while Grothendieck topologies are structures defined on arbitrary categories that allow the definition of sheaves on those categories, and with that the definition of general cohomology theories.
Knot theory, a branch of topology, is used in biology to study the effects of certain enzymes on DNA. These enzymes cut, twist, and reconnect the DNA, causing knotting with observable effects such as slower electrophoresis. Topology is also used in evolutionary biology to represent the relationship between phenotype and genotype. Phenotypic forms that appear quite different can be separated by only a few mutations depending on how genetic changes map to phenotypic changes during development.
Topological data analysis uses techniques from algebraic topology to determine the large scale structure of a set (for instance, determining if a cloud of points is spherical or toroidal). The main method used by topological data analysis is:
- Replace a set of data points with a family of simplicial complexes, indexed by a proximity parameter.
- Analyse these topological complexes via algebraic topology — specifically, via the theory of persistent homology.
- Encode the persistent homology of a data set in the form of a parameterized version of a Betti number, which is called a barcode.
Although TQFTs were invented by physicists, they are also of mathematical interest, being related to, among other things, knot theory and the theory of four-manifolds in algebraic topology, and to the theory of moduli spaces in algebraic geometry. Donaldson, Jones, Witten, and Kontsevich have all won Fields Medals for work related to topological field theory.
In cosmology, topology can be used to describe the overall shape of the universe. This area is known as spacetime topology.
The various possible positions of a robot can be described by a manifold called configuration space. In the area of motion planning, one finds paths between two points in configuration space. These paths represent a motion of the robot's joints and other parts into the desired location and pose.
- Equivariant topology
- General topology
- List of algebraic topology topics
- List of examples in general topology
- List of general topology topics
- List of geometric topology topics
- List of topology topics
- Publications in topology
- Topology glossary
- Topological order
- Topological space
- Bruner, Robert (2000). "What is Topology? A short and idiosyncratic answer".
- Croom 1989, p. 7
- Richeson 2008, p. 63
- Aleksandrov 1969, p. 204
- Richeson (2008)
- Listing, Johann Benedict, "Vorstudien zur Topologie", Vandenhoeck und Ruprecht, Göttingen, p. 67, 1848
- Tait, Peter Guthrie, "Johann Benedict Listing (obituary)", Nature *27*, 1 February 1883, pp. 316–317
- Fréchet, Maurice (1906). Sur quelques points du calcul fonctionnel. PhD dissertation. OCLC 8897542.
- Hausdorff, Felix, "Grundzüge der Mengenlehre", Leipzig: Veit. In (Hausdorff Werke, II (2002), 91–576)
- Croom 1989, p. 129
- Munkres, James R. Topology. Vol. 2. Upper Saddle River: Prentice Hall, 2000.
- Adams, Colin Conrad, and Robert David Franzosa. Introduction to topology: pure and applied. Pearson Prentice Hall, 2008.
- Allen Hatcher, Algebraic topology. (2002) Cambridge University Press, xii+544 pp. ISBN 0-521-79160-X and ISBN 0-521-79540-0.
- Lee, John M. (2006). Introduction to Smooth Manifolds. Springer-Verlag. ISBN 978-0-387-95448-6.
- Budney, Ryan (2011). "What is geometric topology?". mathoverflow.net. Retrieved 29 December 2013.
- R.B. Sher and R.J. Daverman (2002), Handbook of Geometric Topology, North-Holland. ISBN 0-444-82432-4
- Johnstone, Peter T., 1983, "The point of pointless topology," Bulletin of the American Mathematical Society 8(1): 41–53.
- Artin, Michael (1962). Grothendieck topologies. Cambridge, MA: Harvard University, Dept. of Mathematics. Zbl 0208.48701.
- Adams, Colin (2004). The Knot Book: An Elementary Introduction to the Mathematical Theory of Knots. American Mathematical Society. ISBN 0-8218-3678-1
- Barble M R Stadler; et al. "The Topology of the Possible: Formal Spaces Underlying Patterns of Evolutionary Change". Journal of Theoretical Biology. 213: 241–274. doi:10.1006/jtbi.2001.2423.
- Gunnar Carlsson (April 2009). "Topology and data" (PDF). BULLETIN (New Series) OF THE AMERICAN MATHEMATICAL SOCIETY. 46 (2): 255–308. doi:10.1090/S0273-0979-09-01249-X.
- "The Nobel Prize in Physics 2016". Nobel Foundation. 4 October 2016. Retrieved 12 October 2016.
- Som, V; Ketisch, P.; Rodriguez, J.; Shpunt, A.; Hubler, A. (2011). "Topological similarities in electrical and hydrological drainage networks.". Appl. Phys., 109,036103.
- Yau, S. & Nadis, S.; The Shape of Inner Space, Basic Books, 2010.
- The Shape of Space: How to Visualize Surfaces and Three-dimensional Manifolds 2nd ed (Marcel Dekker, 1985, ISBN 0-8247-7437-X)
- John J. Craig, Introduction to Robotics: Mechanics and Control, 3rd Ed. Prentice-Hall, 2004
- Aleksandrov, P. S. (1969) , "Chapter XVIII Topology", in Aleksandrov, A.D.; Kolmogorov, A.N.; Lavrent'ev, M.A., Mathematics / Its Content, Methods and Meaning (2nd ed.), The M.I.T. Press
- Croom, Fred H. (1989), Principles of Topology, Saunders College Publishing, ISBN 0-03-029804-0
- Richeson, D. (2008), Euler's Gem: The Polyhedron Formula and the Birth of Topology, Princeton University Press
- Ryszard Engelking, General Topology, Heldermann Verlag, Sigma Series in Pure Mathematics, December 1989, ISBN 3-88538-006-4.
- Bourbaki; Elements of Mathematics: General Topology, Addison–Wesley (1966).
- Breitenberger, E. (2006). "Johann Benedict Listing". In James, I. M. History of Topology. North Holland. ISBN 978-0-444-82375-5.
- Kelley, John L. (1975). General Topology. Springer-Verlag. ISBN 0-387-90125-6.
- Brown, Ronald (2006). Topology and Groupoids. Booksurge. ISBN 1-4196-2722-8. (Provides a well motivated, geometric account of general topology, and shows the use of groupoids in discussing van Kampen's theorem, covering spaces, and orbit spaces.)
- Wacław Sierpiński, General Topology, Dover Publications, 2000, ISBN 0-486-41148-6
- Pickover, Clifford A. (2006). The Möbius Strip: Dr. August Möbius's Marvelous Band in Mathematics, Games, Literature, Art, Technology, and Cosmology. Thunder's Mouth Press. ISBN 1-56025-826-8. (Provides a popular introduction to topology and geometry)
- Gemignani, Michael C. (1990) , Elementary Topology (2nd ed.), Dover Publications Inc., ISBN 0-486-66522-4
|Wikimedia Commons has media related to Topology.|
|Wikibooks has more on the topic of: Topology|
- Hazewinkel, Michiel, ed. (2001), "Topology, general", Encyclopedia of Mathematics, Springer, ISBN 978-1-55608-010-4
- Elementary Topology: A First Course Viro, Ivanov, Netsvetaev, Kharlamov.
- Topology at DMOZ
- The Topological Zoo at The Geometry Center.
- Topology Atlas
- Topology Course Lecture Notes Aisling McCluskey and Brian McMaster, Topology Atlas.
- Topology Glossary
- Moscow 1935: Topology moving towards America, a historical essay by Hassler Whitney.