Dart (sewing)

For the popular pub game, see Darts. For projectiles, see Dart (missile). For the Dodge motor vehicle, see Dodge Dart. Other uses Dart (disambiguation)

The reverse side of fabric showing where a dart has been taken in and stitched to tailor the shape of a garment to the wearer.

Darts are folds (tucks coming to a point) and sewn into fabric to take in ease and provide shape to a garment, especially for a woman's bust. They are used frequently in all sorts of clothing to tailor the garment to the wearer's shape, or to make an innovative shape in the garment. Fabric may be thought of as flat, and a dart has the effect of removing a wedge shaped piece and pulling the edges of that wedge together to create a shallow cone. This effect can be seen quite easily with a paper pattern by pulling together the edges of a dart intake as it would be sewn. Since fabric is generally more flexible than paper the fabric will shift around the apex of the cone and form a softer, but still curved, shape. In a garment a dart ends in a point at a full area of the body.

A dart in a flat pattern has two important properties: its point, the point in the pattern at which the dart aims or converges, and the intake, or the amount of fabric taken in or removed. Since the dart can extend toward any edge of the pattern without affecting fit, the length of the dart intake at the edge of the fabric is not a good measure of dart intake. Rather, the angle subtracted from the pattern by the dart is what determines the dart's intake.

Manipulating darts in flat patterns

As long as the focal point of a dart and its intake remain the same, a dart can be rotated around its focal point, or stylized in one of several ways without affecting the fit of the garment.

Slash-and-spread dart rotation

An easy way to rotate a dart on a flat pattern is to slice a straight line from the dart point to another edge of the pattern (the slash). The two pieces thus created can then be pivoted (spread) at the dart point to shift the dart to the position of the slash.

Pin and pivot dart rotation

The pin and pivot dart rotation technique requires tracing a new pattern from the original. First, the pattern with the dart to be rotated is set on top of another piece of paper on which the new pattern will be traced. A pin is pressed into the dart point to hold that point in place. Then one leg of the original dart and an arbitrary part of the original pattern is traced onto the paper. This tracing starts from the one dart leg and continues from there to the new point where the dart will reach the outside of the pattern piece. The pattern is then rotated around the pinned dart point until the other dart leg lines up with the traced dart leg. Tracing can then continue from the same spot on the original pattern. The pattern is then removed and the new dart legs drawn between the dart point (marked by the pin hole) and the gap in the pattern created during rotation.

Dart Equivalents

Pleats or gathers in the fabric can be used as for the same purpose as a normal stitched dart. These are called dart equivalents.[1] Darts can also be worked into style lines.

Named Dart Styles

Two kinds of darts are common in blouses for women:

In the early 1950s, the New York City firm of Evan-Picone pioneered the use of darts in the pockets of women's clothing. The darts help keep the pocket open and thus more easily accessed, reducing the chance of rips or tears.[3]

See also

References

  1. ↑ Joseph-Armstrong, Helen (2010). Patternmaking for Fashion Design Fifth Edition. Pearson. ISBN 978-0-13-606934-8.
  2. ↑ Calderin, Jay (2009). Form, Fit and Fashion. Rockport Publishers Inc. p. 131. ISBN 9781592535415.
  3. ↑ Hays, Constance. "Joseph Picone, 83, a Founder of Line of Women's Clothing." New York Times. June 26, 2001.
This article is issued from Wikipedia - version of the 6/13/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.